Bissell 3594 User Manual

Size:
1.78 Mb
Download

CleanView®

B A G L E S S

Power Trak®

15

16 Warranty

Thanks For Buying A BISSELL CleanView®

We’re glad you purchased a BISSELL CleanView Vacuum. Everything we know about floor care went into the design and construction of this complete, high-techhome vacuuming system.

Your BISSELL CleanView is well made, and we back it with a limited comprehensive one-yearwarranty. We also stand behind it with a knowledgeable, dedicated Consumer Services Department, so, should you ever have a problem, you’ll receive fast, considerate assistance.

My great-grandfatherinvented the floor sweeper in 1876. Today,

BISSELL is a global leader in the design, manufacture, and service of high quality homecare products like your BISSELL CleanView.

Thanks again, from all of us at BISSELL.

Mark J. Bissell

President and Chief Executive Officer

2

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precautions should be observed, including the following:

READ ALL INSTRUCTIONS BEFORE USING YOUR UPRIGHT VACUUM.

Always connect to a polarized outlet (left slot is wider than right). Unplug from outlet when not in use and before conducting maintenance.

WARNING:To reduce

the risk of fire, electric shock, or injury:

Do not modify the polarized plug to fit a non-polarizedoutlet or extension cord.

Do not leave vacuum cleaner unattended when it is plugged in.

Unplug from outlet when not in use and before servicing.

Unplug before attaching TurboBrush.

Do not use outdoors or on wet surfaces.

Do not allow children to operate vacuum cleaner or use as a toy.

Close attention is necessary when used by or near children.

Do not use for any purpose other than described in this User’s Guide.

Use only manufacturer’s recommended attachments.

Do not use with damaged cord or plug.

If appliance is not working as it should,

has been dropped, damaged, left outdoors, or dropped into water, have it repaired at an authorized service center.

Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.

Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

Do not handle vacuum cleaner or plug with wet hands.

Do not put any object into openings.

Do not use with any opening blocked; keep openings free of dust, lint, hair, and anything that may reduce air flow.

Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.

Turn off all controls before plugging or unplugging vacuum cleaner.

Use extra care when cleaning stairs.

Do not pick up flammable materials (lighter fluid, gasoline, kerosene, etc.) or use in the presence of explosive liquids or vapors.

Do not pick up toxic material (chlorine bleach, ammonia, drain cleaner, etc.).

Do not use vacuum cleaner in an enclosed space filled with vapors given off by oil base paint, paint thinner, some moth proofing substances, flammable dust, or other explosive or toxic vapors.

Do not pick up hard or sharp objects such as glass, nails, screws, coins, etc.

Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.

Do not use without filters in place.

Use only on dry, indoor surfaces.

Keep appliance on a level surface.

Do not carry the vacuum cleaner while it is running.

WARNING: The Power Cord on this product contains lead, a chemical known to the State of California to cause birth defects or other reproductive harm.WASH HANDS

AFTER HANDLING.

SAVE THESE INSTRUCTIONS FOR FUTURE USE

THIS APPLIANCE HAS A POLARIZED PLUG.

To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a proper outlet. Do not change the plug in any way.

This model is for household use only.

3

Cord Clip

Hose Clip

Stretch Hose

Carrying

Handle

 

Quick Release

 

Cord Wrap

Crevice Tool

Power Cord

 

Quick Reach®

Upper Tank Knob

Handle

 

Extension Wand

Hose Wand

 

Dusting Brush/

Hose

Upholstery Tool

Wand Base

 

Handle Release

 

Pedal

 

 

Dirt Container

Pre-MotorFilter

Headlight

Height

Adjustment

Knob

Handle

TurboBrush®

(Select Models Only)

Clean Carpet Sensor

(Select Models Only)

Power Switch

Clean Filter Indicator

(Select Models Only)

Louvers

Upper Tank

Frame and Filter

(Inside Louvers)

Upper Tank

Post-Motor

Filter

Optional Hepa

Media Filter

(Select Models

Only)

Lock ’n SealLever

 

Power Trak®

 

 

Window

 

 

 

 

 

 

 

 

CAUTION:

 

 

 

Do not plug in your vacuum

 

 

 

cleaner until you are familiar

 

 

 

with all instructions and

 

4

 

operating procedures.

 

Furniture Protection

Guard

How To Use This Guide

This User’s Guide has been designed to help you get the most satisfaction from your BISSELL CleanView. You’ll find assembly and operating instructions,

safety precautions, as well as maintenance and troubleshooting instructions. Please read this Guide thoroughly before assembling your vacuum cleaner.

Pay particular attention to the product diagram, assembly instructions, and part names. Locate and organize all parts before assembly. Familiarize yourself with the parts and where they fit. Following this User’s Guide will greatly enhance your ability to get the most performance from your BISSELL CleanView for many years.

WARNING:

Plastic film can be dangerous. To avoid danger of suffocation, keep away from babies and children.

How To Put It Together

your vacuum

2.

base of

top of the

 

3.

the vacuum

to push firmly

 

4.

packet into the

.

 

5

Attach Vacuum Hose and Tools

1.

2.

1a

2a

3a

Twist ‘n Snap Hose Models

.

Slide the Dusting Brush/Upholstery Tool into the storage clip as shown.

6.Attach the TurboBrush by aligning the small holes near the brush roll with the tabs at the bottom of TurboBrush housing. Snap TurboBrush into place as shown.

Select Models Only

NOTICE:

The Floor Brush will continue to rotate while you use your vacuum for above floor cleaning. To prevent carpet damage, do not lean on the vacuum or let the Powerfoot tilt forward.

CAUTION:

Before using your vacuum, make sure that the Dirt Container and Upper Tank are in locked position and that all filters (UpperTank, Pre-MotorandPost-Motor)are in place. Do not operate your vacuum without these filters.

6

How To Use Your Vacuum

Handle Positions

1

2

3

Powerfoot/Rotating Floor Brush on your can be adjusted to clean several

surfaces.

NOTE: For optimal cleaning performance, adjust to the lowest practical setting. If your cleaner is difficult to push, adjust to the next higher setting.

Position.

Turn Height Adjustment knob to desired setting.

Lowest Setting

For bare floors.

Medium Settings

For short and medium

 

pile carpets.

Highest Setting

For plush pile carpet.

Place the Handle in the normal cleaning position and the Powerfoot will adjust to the setting chosen.

NOTE: You may also adjust the setting while in the normal cleaning position.

Tip:

Before cleaning under low furniture, check area first for objects that might harm the unit or block the Vacuum Hose.

Tip:

Your vacuum features a Quick-ReleaseCord Wrap. To remove the Power Cord quickly and easily, rotate the Upper Cord Wrap towards floor, and slip Power Cord from Upper and Lower Cord Wraps.

Carrying

Handle

2.

7

Clean Filter Indicator

NOTICE:

While vacuuming, certain carpets and low humidity conditions may generate small static discharges. The discharges are entirely harmless and are not associated in any way with the main

power supply.

8

Special On-BoardTools

1.

2.

3.

1.

2.

3.

4.

the

NOTICE:

The Floor Brush will continue to rotate while you use your

vacuum for above floor cleaning. To prevent carpet damage, do not lean on the vacuum or let the Powerfoot tilt forward.

Brush while tools

the risk of parts,

with the back place

with when

your when

place or

not place enough into

9

How To Maintain Your Vacuum

1.

2.

3.

Empty Dirt Container

1.

2.

3.

4.

5.

WARNING:

To reduce the risk of electric shock, turn Power Switch OFF and disconnect polarized plug from electrical outlet before performing maintenance or troubleshooting checks.

Tip:

For maximum cleaning performance, check and clean or replace all filters as suggested.

 

Full Line

Unlock

Lock Position

Position

 

10