Bissell 3590, 8990, 3591 User Manual

Size:
686.35 Kb
Download

CleanView

B A G L E S S

U S E R ’ S G U I D E

3590/3591/8990 SERIES

3

4

4-5

6-8

8-11 Maintenance

12 Troubleshooting

 

13

Replacement Parts

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

15

Reorder Form

Thanks for buying a BISSELL CleanView

We’re glad you purchased a BISSELL CleanView Vacuum. Everything we know about floor care went into the design and construction of this powerful, high-techhome vacuuming system.

Your BISSELL CleanView is well made, and we back it with a limited comprehensive one-yearwarranty. We also stand behind it with a

knowledgeable, dedicated Consumer Services department, so, should you ever have a problem, you’ll receive fast, considerate assistance.

My great-grandfatherinvented the floor sweeper in 1876. Today, BISSELL is a global leader in the design, manufacture, and service of high quality homecare products like your BISSELL CleanView.

Thanks again, from all of us at BISSELL.

Mark J. Bissell

President and Chief Executive Officer

2

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precautions should be observed, including the following:

READ ALL INSTRUCTIONS BEFORE USING YOUR UPRIGHT VACUUM.

Always connect to a polarized outlet (left slot is wider than right). Unplug from outlet when not in use and before conducting maintenance.

WARNING: To reduce the risk of fire, electric shock, or injury:

Do not modify the polarized plug to fit a non-polarizedoutlet or extension cord.

Do not leave vacuum cleaner unattended when it is plugged in.

Unplug from outlet when not in use and before servicing.

Do not use outdoors or on wet surfaces.

Do not allow children to operate vacuum cleaner or use as a toy.

Close attention is necessary when used by or near children.

Do not use for any purpose other than described in this User’s Guide.

Use only manufacturer’s recommended attachments.

Do not use with damaged cord or plug.

If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, have it repaired at an authorized service center.

Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.

Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

Do not handle vacuum cleaner or plug with wet hands.

Do not put any object into openings. Do not use with any opening blocked; keep openings free of dust, lint, hair, and anything that may reduce air flow.

Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.

Turn off all controls before plugging or unplugging vacuum cleaner.

Use extra care when cleaning stairs.

Do not pick up flammable materials (lighter fluid, gasoline, kerosene, etc.) or use in the presence of explosive liquids or vapors.

Do not pick up toxic material (chlorine bleach, ammonia, drain cleaner, etc.).

Do not use vacuum cleaner in an enclosed space filled with vapors given off by oil base paint, paint thinner, some moth proofing substances, flammable dust, or other explosive or toxic vapors.

Do not pick up hard or sharp objects such as glass, nails, screws, coins, etc.

Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.

Do not use without filters in place.

Use only on dry, indoor surfaces.

Keep appliance on a level surface.

Do not carry the vacuum cleaner while it is running.

SAVE THESE INSTRUCTIONS FOR FUTURE USE.

THIS APPLIANCE HAS A POLARIZED PLUG.

To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a proper outlet. Do not change the plug in any way.

This model is for household use only.

3

Hose Clip

Stretch Hose

Quick Release

Cord Wrap

Carrying

Handle

Quick Reach

Handle

Hose Wand

 

Hose

 

Wand Base

 

Cord

CleanView

 

Window

 

 

Motor Filter

 

Headlight

Furniture

Power Trak

Protection Guard

 

Power TrakModels

Powerfoot

C A U T I O N :

Do not plug in your vacuum cleaner until you are familiar with all instructions and operating procedures.

Handle

Power

Switch

Louvers

Upper Tank

Post-Motor

Filter

Optional Hepa

Media Filter (Select

Models Only)

Lock ’n

SealLever

Handle

Release

Pedal

Furniture

Protection

Guard

4

How To Use This Guide

get the find

as well read

cleaner.

parts where your

How To Put It Together

vacuum

1

 

 

 

 

 

2

.

 

 

vacuum

3.

 

firmly

 

 

into the

4.

.

 

 

Attach Vacuum Hose and Tools

 

 

vacuum

1.

 

 

 

 

 

from

2.

 

 

 

 

 

of the

3.

 

 

the

effectively to the

W A R N I N G :

Plastic film can be dangerous. To avoid danger of suffocation, keep away from babies and children.

5

Attach Vacuum Hose and Tools Continued

4.

Slide the Dusting Brush Tool into the storage clip as shown.

5.

How To Use Your BISSELL CleanView

Handle Positions

Note:

The Floor Brush will continue to rotate while you use your vacuum for above floor cleaning. To prevent carpet damage, do not lean on the vacuum or let the Powerfoot tilt forward.

tools.

1.

Use

Height Adjustment

is

CAUTION:

Before using your vacuum, make sure that the Dirt Container and Upper Tank are in locked position and that both filters (Pre-MotorandPost-Motor)are in place. Do not operate your vacuum without these filters.

1

2

3

Before cleaning under low furniture, check area first for objects that might harm the unit or block the Vacuum Hose.

 

Tip:

 

Your BISSELL

 

CleanView

 

features a

 

Quick-Release

 

Cord Wrap. To

3

remove the

Power Cord

 

quickly and

 

easily, rotate the

 

Upper Cord Wrap

 

towards floor,

 

and slip Power

 

Cord from Upper

 

and Lower

6

Cord Wraps.

 

1.

2.

rug cleaner

Carrying

Handle

Note:

The Floor Brush will continue to rotate while you use your vacuum for above floor cleaning. To prevent carpet damage, do not lean on the vacuum or let the Powerfoot tilt forward.

1.

2.

3.

to

CAUTION:

The Rotating Floor Brush continues to rotate while tools are in use. To reduce the risk of injury from moving parts, always move the cleaner with the Carrying Handle at the back of the cleaner. Always place vacuum cleaner on floor with Handle in Upright position when using tools. Never place your fingers under the cleaner when it is running. Never place Powerfoot on furniture or uneven surfaces. Do not place vacuum cleaner close enough

to objects to pull them into rotating brush.

7

Power Cord Storage

1.

2.

1.

2.

3.

Dirt Container

2

3

4.

5.

to the

(NOT

NOTICE:

While vacuuming, certain carpets and low humidity conditions may generate small static discharges. The discharges are entirely harmless and are not associated in any way with the main power supply.

WARNING:To

reduce the risk of electric shock, turn Power Switch OFF and disconnect polarized plug from electrical outlet before performing maintenance or troubleshooting checks.

Tip:

For maximum cleaning performance, Check and clean or

 

Full Line

Unlock

Lock Position

Position

 

8

Cleaning The Upper Tank & Louvers

1.

2.

3.

Cleaning The Pre-MotorandPost-MotorFilters

N G :

cleaner wet all

1.

2

3

Pre-Motor

Post-Motor

Filter

Filter

 

 

4.

W A R N I N G :

To reduce the risk of injury from moving parts, turn off vacuum cleaner and disconnect Power Plug from electrical outlet.

9

Check Rotating Floor Brush and Drive Belt

1.

2.

3.

4.

Brush

Cover

Power Trak models only

5.

6.

7.

8.

Replace Drive Belt

Motor Pulley

Air Passageway

10