Bissell 3540B User Manual

Size:
189.79 Kb
Download

User’s Guide

Model 3540B

PowerClean

Upright Vacuum

Assembly

Operation

Maintenance

Troubleshooting

Thanks for buying a BISSELL PowerCleanUpright Vacuum.

We’re glad you purchased a BISSELL PowerCleanUpright Vacuum Cleaner. Everything we know about floor care went into the design and construction of this powerful, innovative home vacuuming system.

Your vacuum cleaner is well made, and we back it with a comprehensive one-yearwarranty. We also stand behind it with a knowledgeable, dedicated Customer Service Department, so, should you ever have a problem, you’ll receive fast, considerate assistance.

My great-grandfatherinvented the floor sweeper in 1876. Today, BISSELL is a global leader in the design, manufacture, and service of high quality homecare products like your PowerClean Upright Vacuum Cleaner.

Thanks again, from all of us at BISSELL.

Mark J. Bissell

President and Chief Executive Officer

Powerful 12.0 amp motor5 surface height settings

4 specialized tools for all cleaning needs

9’self-retractingvacuum hose

25’ power cord with Quick Release feature

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precautions should be observed, including the following:

Read all instructions before using your

upright. Always connect to a polarized outlet (left slot is larger than right). Unplug from outlet when not in use and before conducting maintenance.

WARNING: To reduce the risk of electric shock, fire or injury do not use outdoors or on wet surfaces.

Do not modify the polarized plug to fit a non-polarizedoutlet or extension cord

Do not leave vacuum cleaner when it is plugged in

Do not perform maintenance when vacuum cleaner is plugged in

Do not use with damaged cord or plug

Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord

Do not pull or carry by cord, use cord as a handle, close door on cord, pull cord around sharp corners, run vacuum cleaner over cord, or expose cord to heated surfaces

If appliance is not working as it should, has been dropped, damaged, left outdoors or dropped into water, return it to a Service Centre.

Do not allow children to operate vacuum cleaner or use as a toy

Do not handle vacuum cleaner or plug with wet hands

Do not carry the vacuum cleaner while it is running

Do not put any object into ventilation openings, use with blocked opening, or restrict air flow

Do not use without Vacuum Bag and/or filters in place

Do not expose hair, loose clothing, fingers or body parts to openings or rotating floor brush

Do not pick up hot coals, cigarette butts, matches or any hot or burning objects

Do not pick up hard or sharp objects such as glass, nails, screws, coins, etc.

Do not pick up flammable or combustible materials (lighter fluid, gasoline, kerosene, etc.) or use in the presence of explosive liquids or vapour

Do not pick up toxic material (chlorine bleach, ammonia, drain cleaner, gasoline, etc.)

Do not use vacuum cleaner in an enclosed space filled with vapours given off by oil base paint, paint thinner, some moth proofing substances, flammable dust, or other explosive or toxic vapours

Do not use for any purpose other than described in this User’s Guide

Use only manufacturer’s recommended attachments

Use only on dry, indoor surfaces

Keep openings free of dust, lint, hair, etc.

Keep appliance on a level surface

Turn off all controls before plugging or unplugging vacuum cleaner

Be extra careful when cleaning stairs

Pay close attention when working around children

SAVE THESE INSTRUCTIONS FOR FUTURE USE.

THIS APPLIANCE HAS A POLARIZED PLUG.

To reduce the risk of electric shock, this appliance has a polarized plug (one blade is larger than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a proper outlet. Do not change the plug in any way.

This model is for household use only.

2

WARNING:Do

not plug in your vacuum cleaner until you have completely assembled it per the following instructions and are familiar with all instructions and operating procedures.

Quick-

Release

Cord Wrap

Plug

Exhaust

Filter

Lower

Cord

Wrap

4. Handle

Wand

Attachment

Clips

Power

Cord

5. Tool

Caddy

Rear

Stair

Handle

 

Self-

Handle

Retracting

Release

Vacuum

Pedal

Hose

Headlight

Furniture Protection Guard

Cover

Release

Button

Vacuum

Body

Cover

2. Vacuum Body

Front Stair Handle

3. Bolt

Surface Height Adjustment

1. Powerfoot

3

How to use this guide

This User’s Guide has been designed to help you get the utmost satisfaction from your BISSELL PowerClean Upright Vacuum Cleaner. You’ll find assembly and operating instructions, safety precautions, as well as maintenance and troubleshooting instructions. Please read this Guide thoroughly before assembling your vacuum cleaner.

Pay particular attention to the assembly diagram, assembly instructions, and part names. Locate and organize all parts before assembly. Familiarize yourself with the parts and where they go. Following this User’s Guide will greatly enhance your ability to get the most performance from your BISSELL PowerClean for many years.

How to put it together

The only tool you’ll need to assemble your vacuum cleaner is a Phillips head screwdriver.

Attach Vacuum Body to Powerfoot

1. Place Powerfoot on floor with rotating agitator brush on floor surface.

Place Vacuum Body onto Powerfoot and push down firmly on 2. top corners of Vacuum Body while rocking slightly from side to

side. You will hear a ‘click’ when raised area on back of Powerfoot enters opening on back of Vacuum Body.

3. Push long bolt through bottom hole on FRONT of lower body. Place nut over end of bolt and hold in place while tightening bolt with a phillips head screwdriver.

NOTE: If bolt will not go through hole easily, repeat step 1.

Attach Handle to Vacuum Body

4. Align Handle with edges of upper Vacuum Body and press down. You will hear it snap into place.

WARNING:

Plastic bags or plastic film can be dangerous. To avoid danger of suffocation, keep away from babies and children.

4

Index

Attach Tool Caddy to Vacuum Body

5. With the front of Vacuum facing down and the Power Cord placed off to the side, place the Tool Caddy in position on the back of the Vacuum Body. The Tool Caddy should be flush with the back of the Vacuum Body if you have positioned it correctly.

6. Place the three screws into the holes provided, then tighten with a Phillips head screwdriver until each screw head is flush with the Tool Caddy surface. The top screw will also assemble through the Handle.

Attach Tools to Caddy

Dusting Brush

Crevice Tool

Upholstery Nozzle

Wand

Attach Tools to Caddy as shown. Dust Brush and Upholstery 7. Nozzle storage areas are identified by shape and symbol, the Wand slips into the two clips at the side of the Vacuum Body,

and the Crevice Tool slips into the top of the Wand.

Examine the Vacuum Hose Assembly. One end has a short cuff 8. with two (2) slots. Place the short cuff into the hole in the

Vacuum Foot Cover (left of the Headlight) and turn clockwise until you feel a slight ‘click.’ Attach the long cuff to the clip near the top of the Vacuum Body Cover.

Assembly is now complete.

Safety instructions . . . . . . . . . . 2 Product view . . . . . . . . . . . . . . . 3 How to put it together . . . . . . 4-5Index . . . . . . . . . . . . . . . . . . . . . 5

How to use your

BISSELL PowerClean . . . . . . . . 6 Using special tools . . . . . . . . . . 7 Routine maintenance . . . . . 8-10Troubleshooting . . . . . . . . . . .11 Replacement parts . . . . . . . . .12 Warranty . . . . . . . . . . . . . . . . .13 Customer Service . . . . . . . . . . .13

7.Tool Attachment

8.Connect

Hose to Powerfoot

5

How to use your BISSELL PowerClean

Tip:

Before cleaning under low furniture, check for objects that might harm the rotating floor brush or block the vacuum hose. Do not pick up hard or sharp objects such as glass, nails, screws, coins, paper clips, etc.

Powerfoot Height Adjustment

Power Cord Quick Release

The Power Cord is stored at the back of the Vacuum Body, looped around two Cord Wraps. A molded clip on the polarized plug allows it to be fastened to the Power Cord during storage.

1.Unclip polarized plug from Power Cord.

2.Rotate the Upper Cord Wrap one-halfturn right or left, and slip Power Cord from Upper and Lower Cord Wraps.

3.Connect Power Cord Plug with a polarized outlet.

4.To keep the Power Cord out of your way while cleaning, place it in the cord hook near the top of the handle.

Power Switch

The Power Switch is located just below the hand grip. Push the rocker switch “ON” to vacuum, and “OFF” when cleaning is complete.

You can adjust the Powerfoot/Rotating Floor Brush of your

BISSELL Upright Vacuum to clean several floor surfaces.

1.Place Handle in Upright Position (see Handle Positions, Page 6).

2.Move Height Adjustment to desired setting.

HI - For plush pile or shag carpet.

BARE FLOOR - For smooth floors without carpet.

Do not adjust vacuum cleaner too low in deep pile or shag carpet. This can overload motor and damage rotating floor brush or drive belt.

Handle Positions

Press the Handle Release Pedal at the back of the Powerfoot to

 

 

 

 

 

 

 

 

place your PowerClean into one of three cleaning positions.

 

 

 

 

 

 

 

 

1. Upright - For storage and above floor cleaning with

 

 

 

 

 

 

 

 

special tools.

 

 

 

 

 

 

 

 

1.

 

 

 

 

 

 

 

2. Normal Cleaning - Use for most household floor

 

 

 

 

 

 

 

 

cleaning tasks.

2.

 

 

 

 

 

3. Low Cleaning - Use for vacuuming under low furniture

 

 

 

 

 

 

 

 

such as tables, chairs and beds.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NOTE: The handle will not lock in the Normal or

 

 

 

 

 

 

 

 

Low cleaning positions.

3.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Tip:

Don’t adjust your cleaner too low in deep pile or shag carpet.

This can overload motor and damage rotating floor brush or

drive belt.

6

Special tools

Your BISSELL PowerClean is not only a powerful carpet and rug vacuum cleaner, it’s also a versatile above floor vacuum cleaner when you select one of the four special tools included.

Dusting Brush - For dusting surfaces such as table tops, mantles, lamp shades, drapes, woodwork, etc.

Wand - For extra length or reach.

Crevice Tool - For tight, narrow spaces.

Upholstery Nozzle - For small area vacuuming such as upholstered household furniture, automobile interiors, drapery, etc.

Dusting Brush

Wand

Above floor cleaning

1.Raise Handle to Upright Position. The PowerClean will automatically reset Height Adjustment to the High position, but the floor brush will continue to rotate.

2.With the Handle in the Upright position, disconnect Self-RetractingVacuum Hose from upper Attachment Clip. Suction is diverted automatically.

3.Attach tools by pressing firmly onto Hose end.

To resume normal floor vacuuming:

1.Remove tool from Vacuum Hose.

2.Reconnect Vacuum Hose to the Attachment Clip near the top of the Vacuum Body Cover.

3.Return Handle to Normal Cleaning position The PowerClean will return the Height Adjustment to the most recent setting.

Power Cord Storage

When you are done using your BISSELL PowerClean, return it to the Upright position and store the Power Cord.

1.Turn vacuum cleaner OFF.

2.Unplug Power Cord by grasping the polarized plug (NOT the cord) and disconnect from outlet.

3.Loop Power Cord around Cord Wraps on back of vacuum cleaner.

4.Clip molded plug to Power Cord to secure.

Crevice Tool

Upholstery Nozzle

WARNING:The Floor

Brush continues to rotate while tools are in use. To reduce the risk of injury from moving parts, always move the cleaner with the carry handles at the front and back of the cleaner. Always place vacuum cleaner on floor with handle in upright position when using tools. Never place your fingers under the cleaner when it is running. Never place powerfoot on furniture, or place vacuum cleaner close enough to objects to pull them into rotating brush.

7

Routine maintenance

To maintain maximum performance from your BISSELL cleaner, perform these simple maintenance checks periodically.

For average household use, (one hour per week) follow this maintenance schedule:

Weekly

Check the Vacuum Filtration Bag

 

 

 

 

 

 

and Exhaust (foam) Filter

 

 

 

 

 

 

 

 

 

 

WARNING: To

Monthly:

Check the Drive Belt and Rotating Brush

 

 

 

 

 

 

 

 

reduce the risk of electric

 

 

 

 

 

 

 

 

 

 

 

 

shock, turn Power Switch

Replace Dust Bag

 

 

 

 

 

 

 

 

 

 

OFF and disconnect

 

 

 

 

 

 

polarized plug from

 

 

 

 

 

 

To maintain peak vacuum efficiency, you should check the

 

 

 

 

electrical outlet before

Dust Bag weekly and replace it when it is no more than half

 

 

 

 

performing maintenance.

 

 

 

 

 

full. Never reuse a paper Dust Bag.

 

 

 

 

 

 

 

 

 

 

1. Lift Cover Release Latch and Remove Vacuum

 

 

 

 

 

Body cover.

 

Tip:

 

2. Release Collar Retainer by pulling the top toward you.

 

Vacuuming

 

Slide Bag Collar up and out of Retainer. Dispose of

 

Dust Bag.

 

new carpet or

 

3. Slide Collar of new Dust Bag completely into

vacuuming fine

 

powders such

 

Collar Retainer.

 

as drywall dust

 

4. Push Collar Retainer back into position and secure

may clog the

 

in place.

 

Dust Bag, so

 

 

check the bag

 

5. Tuck Dust Bag completely into Vacuum Body. Lay it flat,

 

more often.

 

top to bottom, without bunching.

6.Replace Vacuum Body cover and snap closed. Be careful not to pinch or twist gaskets when replacing Cover.

Replacement Bags

Use only BISSELL Style 5, (#32028, package of 3) paper Dust Bags in your BISSELL Upright Vacuum Cleaner. You may purchase these bags:

at your local retailer,

with the order form in this User’s Guide, or by calling

BISSELL Customer Service

1-800-263-2535

Monday - Friday 8 a.m. – 4:30 p.m. (E.S.T.) or visit our website @ http://www.bissell.com

8

3.Locking Tabs

PUSH TO

RELEASE

PUSH TO

RELEASE

Check Rotating Floor Brush and Drive Belt

Check the Drive Belt and Rotating Floor Brush regularly for wear or damage. You should also remove string, hair, and carpet fibers from the brush and brush ends. These can wrap around the brush and hamper its ability to effectively clean your carpet.

1.Press Handle Release Pedal to position cleaner in full recline position.

2.Turn entire cleaner over to expose bottom of Powerfoot.

3. Using a flat blade screwdriver, depress the two tabs that secure the brush cover.

4.Remove the brush cover and check the belt for damage or wear, and the brush for debris.

5.Check belt carefully for wear, cuts or stressed areas. Inspect entire belt by rolling floor brush with the palm of your hand several times in the direction of the motor pulley.

6.Check Air Passageway for obstructions. Remove debris from this area.

Replace Drive Belt

1.Grasp the brush at both ends and lift up.

2.Stretch old belt to clear motor pulley, remove belt, and discard.

3.Place new belt over pulley and stretch other end over the crown of the floor brush.

4.Place belt end of brush into its slot and hold it in place with your left hand, while slowly pulling opposite end of brush down into its slot with your right hand.

5.Turn brush by hand several times in direction of pulley. If properly installed, the belt will centre itself on brush crown.

6.Align brush cover with notches on front of Powerfoot.

7.Push down until tabs snap into place.

Replacement Belt

Use only BISSELL Replacement Belt (#32034, package of 2) in your BISSELL Upright Vacuum Cleaner. You may purchase these belts:

at your local retailer,

with the order form in this User’s Guide, or by calling

BISSELL Customer Service

1-800-263-2535

Monday - Friday 8 a.m. – 4:30 p.m. (E.S.T.) or visit our website @ http://www.bissell.com

9

Check Exhaust Filter

This foam filter is located on the side of the Vacuum Body, opposite the Vacuum Hose. Check it at the same time you check/change the bag.

1. Use a small, flat blade screwdriver to gently pop the filter cage off the Vacuum Body.

2.If the filter is dirty, pull it out and rinse under warm running water.

3.Squeeze to remove excess water, then air dry completely before replacing.

4.Replace filter making sure it properly fits into cage.

Replace Lightbulb

1.Remove the clear plastic lens at the front of the Powerfoot by inserting a small, flat-bladescrewdriver into the notch at the bottom of the lens. Twist the screwdriver gently to release the retaining tab, then

pull the bottom of the lens outward.

2.Remove the old bulb by pulling it straight out - do not twist. Gently push replacement bulb into socket.

3.Reposition lens over opening with the top tab positioned inside the Powerfoot. Push the bottom of the lens until remaining tabs snap into place.

Replacement Bulb

Use only BISSELL Replacement Bulb (#010-1178)in your BISSELL Upright Vacuum Cleaner. You may purchase

the bulb:

with the order form in this User’s Guide, or by calling

BISSELL Customer Service

1-800-263-2535

Monday - Friday 8 a.m. – 4:30 p.m. (E.S.T.) or visit our website @ http://www.bissell.com

10