Bionaire BAP1700-CN User Manual

874.13 Kb

BAP1700-CN_08EFM1.qxd:BAP1700-CN_08EFM1.qxd6/25/08 9:33 AM Page 1



























































Printed in China














































PERMAtechTM ionizing

air cleaner

with air quality sensor


Read instructions before operating.

Retain for future reference.

Instruction Leaflet


If after having read this leaflet, you have any questions or comments on your air cleaner, call 1-800-253-2764 in North America or visit our website at

BAP1700-CN_08EFM1.qxd:BAP1700-CN_08EFM1.qxd6/25/08 9:33 AM Page 3



When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons.These precautions include:

Read all instructions before using the appliance.

To avoid fire or shock hazard, plug the appliance directly into a 120V AC electrical outlet.

If the filter is covered by a bag when shipped, remove plastic bag before use.

Keep the cord out of heavy traffic areas. To avoid fire hazard, NEVER put the cord under rugs, near heat registers, radiators, stoves, or heaters.

To protect against electrical hazards, DO NOT immerse the appliance in water or other liquids. Do not use near water.

Close supervision is necessary when any appliance is used by or near children, or disabled persons.

Always unplug the air cleaner before moving or cleaning the unit, opening the grill, changing the filters and whenever the unit is not in use. To disconnect the unit, be sure to pull the plug and not the cord.

NEVER drop or insert any objects into the openings of the unit.

Do not operate any appliance with a damaged cord or plug. If the motor fan fails to operate or the unit has been dropped or damaged in any manner, return appliance to manufacturer for examination and/or repair.

Use appliance only for intended household use as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons. The use of attachments not recommended or sold by Jarden Consumer Solutions may cause hazards.

DO NOT use outdoors.

NEVER place on a soft surface such as a bed or sofa as this could cause the unit to tip over and block the air inlet or outlet grills.

Keep unit away from heated surfaces and open flames.

DO NOT attempt to repair or adjust any electrical or mechanical functions on this unit. Doing so will void your warranty. The inside of the unit contains no user serviceable parts. All servicing should be performed by qualified personnel only.

WARNING: To reduce the risk of fire or electric shock, DO NOT use this appliance with anysolid-statespeed control device.

DO NOT place anything on top of unit.

NEVER use detergents, gasoline, glass cleaner, furniture polish, paint thinner, or other household solvents to clean any part of the appliance.

Always turn the appliance off before unplugging it.

The ionizer may cause a static charge to build up on the air outlet grill. A static charge may be felt if the unit is not properly grounded. To avoid a static charge, plug the unit's three-prongplug into a grounded outlet, or properly install a ground adaptor (see PLUG SAFETY). The static charge will not occur if the ionizer is off.

The ionizer in this appliance produces less ozone than the UL established limits of 50ppb. However, in high concentrations, ozone can be harmful to birds and small pets. To prevent ozone buildup, we suggest using the ionizer in well ventilated areas with the fan on.

This appliance should only be used in a room with temperatures between 40°F and 110°F.


To reduce the risk of electric shock, THIS PRODUCT IS EQUIPPED WITH A 3-PRONGPLUG, a grounding type plug that has a third (grounding) pin.

The cord has a plug (A) as shown. An adapter (C)

can be purchased for connecting three-bladegrounding-typeplugs to

two slot receptacles (B).



BAP1700-CN_08EFM1.qxd:BAP1700-CN_08EFM1.qxd6/25/08 9:33 AM Page 5

The green grounding wire or lug extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box. The adapter should not be used if a three-slotgrounded receptacle is available.

This plug will only fit into a grounding type power outlet. If the plug does not fit into the outlet, contact qualified personnel to install the proper outlet.

This product is for use on 120 volts. DO NOT ALTER THE PLUG IN ANY WAY.


The length of cord used on this appliance was selected to reduce tangling or tripping hazards.

If a longer cord is necessary, an approved extension cord may be used. The electrical rating of the extension cord must be equal to or greater than the electrical rating of the air cleaner (see rating label marked on product).

Care must be taken to arrange the extension cord so that it will not drape over the countertop or tabletop where it can be pulled on by children or accidentally tripped over.



Your Bionarie® Air Cleaner features a PermanentHEPA-Typefilter that removes up to 99% of airborne dust and pollen as small as 2 microns and helps reduce smoke, mold spores and pet dander from the air passing through the filter.

Permanent filters can be vacuumed every few months for easy cleaning.

Washable pre-filtercaptures larger particles and extends the permanent filter’s cleaning cycle.

Optional ionizer naturally improves performance and helps freshen the air.

Slim tower design allows placement in almost any area of the room.


Your Bionaire® Air Cleaner includes a particle sensor that measures indoor air quality. When set to auto mode, it

automatically adjusts the fan speed to cycle between low, medium and high speed to provide optimum filtration based on air particulate concentration. It also helps conserve energy by only operating the fan at higher speeds when needed.


This appliance has an optional ionizer feature which, when turned on, releases negative ions into outgoing filtered air to help the air purification process.

What Are Ions?

Ions are tiny particles that carry a positive or negative charge. They exist naturally around us: in the air, water, and ground. Both positive and negative ions are colorless, odorless, and completely harmless.

How Does The Ionizer Work?

Negative ions help air purification by attaching themselves to very small airborne particles in the room. These particles take on a negative charge and may join with positively charged particles such as dust, pollen, smoke, and pet dander to form larger particles. The larger particles are then more easily captured by the filter system.

Important Notes:

Your ionizer may produce an occasional popping or cracking sound. This is normal and occurs when a small buildup of ions is discharged.

After extended use, you may notice dust around the grills or front panel.

This is caused by negative ions exiting the air outlet, evidence of the ionizer’s air cleaning effectiveness.

You can remove the dust with a soft brush or clean, damp cloth.

Larger particles may be attracted to positively charged surfaces throughout the home, like walls or floors.

This may occur more frequently when the filter is nearing the end of its useful product life and unable to capture as many charged particles.

Excessive amounts of pet dander, dust, or smoke may decrease the life expectancy of the filter(s) and interfere with the ionization process.



BAP1700-CN_08EFM1.qxd:BAP1700-CN_08EFM1.qxd6/25/08 9:33 AM Page 7

To help prevent particles from attracting to surfaces throughout your home:

You may want to run the ionizer less often.

Check the condition of the filter(s) more frequently.

CAUTION: The ionizer in this appliance produces less ozone than the UL* established limits of 50ppb. However, in high concentrations, ozone can be harmful to birds and small pets. To prevent ozone buildup, we suggest using the ionizer in well ventilated areas with the fan on.

IMPORTANT: Always clean the PERMAtechTM filter at the recommended intervals (See CLEANING THE PERMAtechTM FILTER). Using the ionizer with dirty filters may result in dirty particles exiting the air cleaner and attracting to walls, carpets, furniture, or other household objects. These dirty particles may prove difficult to remove.


The PERMAtechTM filter allows easy maintenance and eliminates the hassle of filter replacement.HEPA-TYPE(High Efficiency Particulate Air) filters are designed to remove up to 99% of airborne pollutants, at 2 microns or larger, from the air that passes through them. These include tobacco smoke, household dust, pet dander and pollen.


The filter indicator light eliminates guesswork by letting you know when it is time to clean the filters.


The timer allows you to run the air cleaner at your convenience, for up to 8 hours, and automatically turns the power off when time is up, to help reduce energy costs.


For optimum air filtration, operate your Bionaire® Air Cleaner continuously on the HIGH setting. Its rugged motor has been designed to give many years of use. For quieter operation (such as in a bedroom), select LOW setting.

*tested and listed by the Underwriters Laboratories, Inc.


1.Carefully unpack your air cleaner.

2.Select a firm, level surface with no obstructions to the air inlets or outlets.

3.If the filter is covered by a bag when shipped, remove plastic bag before use and place filters into unit (See INSTALLING THE FILTERS).



Remove all plastic bags from filters before use.


To operate your air cleaner:

1.Press the POWER ( ) button.

The air cleaner will turn on at LOW filtering speed.

2.Select filtering speed by pressing POWER button until you reach the desired speed - HIGH, MEDIUM or LOW.

The air cleaner will turn off when you press the POWER button for 3 seconds at any speed.

3.Press IONIZER ( ) button to turn ionizer ON or OFF.

IONIZER button works in any mode except when air cleaner is turned off.


The AUTO feature uses the particle sensor to cycle between low, medium and high speeds, based on surrounding indoor air quality. To use this feature:

1.When air cleaner is off, press the AUTO button.

The button will illuminate and the air cleaner will turn on to auto mode.

2.When air cleaner is on and set at any manual mode speed, press the “auto” button.

The button will illuminate and the air cleaner will run in auto mode.


You may set the timer so it automatically turns off when the desired time has elapsed:

1. Press the TIMER ( ) button until you reach the



BAP1700-CN_08EFM1.qxd:BAP1700-CN_08EFM1.qxd6/25/08 9:33 AM Page 9

desired number of hours you want the unit to operate (2, 4, 6 or 8).

The number of hours selected will light up and remain illuminated on the control panel.

When time is up, the air cleaner will beep 3 times and turn off.

2.To CANCEL the timer, press the TIMER button until TIMER indicator lights are off. You may also cancel the timer operation by turning the power button off.




The PERMAtechTM filter is designed to never need replacement. However, we recommend regular cleaning for optimal performance.

Every few weeks, check the condition of the filter.

After approximately 3 months of operation, a Filter Clean Indicator will alert you to clean the filter before further use.

To clean the filter:

1.Turn off and unplug the air cleaner.

2.Remove the air inlet grill by pulling on the tab.

3.Remove and examine the foam pre-filter.

If it has collected dust or lint, remove and wash it in warm soapy water. Rinse and drip dry thoroughly before placing it back into the grill inlet.

4.Check the condition of the PERMAtechTM filters and remove if dirty.

5. Clean the PERMAtechTM filter.

Using your vacuum cleaner,

run the brush attachment


along both sides of the filter


and clean between the

Figure 2

pleated layers (Figure 2).


IMPORTANT: Do not use water, household cleaners or detergents to clean the PERMAtechTM filter.


Figure 1

A.Inlet Grill

B.Washable Foam Pre-Filter(1)

C.PERMAtechTM Filter (2)

D.Filtered Air Outlet

E.Control Panel

F.Filter Check LED

G.Filter Reset Button

H.Timer Button

I.Timer Leds (4)

J.Ionizer Button

K.Power Button

L.Power/Mode LED’s (3)

M.Auto Button














BAP1700-CN_08EFM1.qxd:BAP1700-CN_08EFM1.qxd6/25/08 9:33 AM Page 11

The filter may appear discolored, even after vacuuming. This is normal and does not affect performance in any way—anew filter is not necessary.

If the filter becomes damaged during cleaning, call 1-800-253-2764to order replacements.



NOTE: A hang tab and filter clips ensure the filter attaches properly.

1. Make sure the hang tab is



securely in place. Align the clip


Figure 3

on the top of the PERMAtechTM


filter with the rails on the inside of



the unit. Gently slide the filter onto



the rail (see Figures 3 and 4).



2. Place air inlet grill back onto unit






3. After replacing the filters, RESET


Figure 4

the Clean Filter Indicator ( ) by




inserting a small object (such as a


Figure 5

pin or paper clip) into the hole


below the filter change light (see





Figure 5). The light will turn off.







• Make sure unit is properly plugged in


and outlet is energized.


• Make sure unit turned ON.


• Make sure nothing is blocking air inlet


and filtered air outlets.


• Remove all plastic bags from filters.


• Check condition of filters and clean if




• Make sure that the air intake grill is at


least 1 to 3 feet from away the wall.


• When unit operates in the AUTO


mode, it will automatically adjust the


fan speed to provide optimum filtra-


tion based on air particulate concen-


tration. Therefore, depending on the


air quality in the room, some variation


in air flow is normal and expected.


• This is normal and does not affect


performance in any way. A new filter


is not necessary.






• Remove plastic bag(s) from filter(s).


Make sure parts are firmly positioned in place.


For a wealth of information about your air cleaner and other Bionaire® products, visit our website at



BAP1700-CN_08EFM1.qxd:BAP1700-CN_08EFM1.qxd6/25/08 9:33 AM Page 13


Sunbeam Products, Inc. doing business as Jarden Consumer Solutions or if in Canada, Sunbeam Corporation (Canada) Limited doing business as Jarden Consumer Solutions (collectively “JCS”) warrants that for a period of five years from the date of purchase, this product will be free from defects in material and workmanship. JCS, at its option, will repair or replace this product or any component of the product found to be defective during the warranty period. Replacement will be made with a new or remanufactured product or component. If the product is no longer available, replacement may be made with a similar product of equal or greater value. This is your exclusive warranty. Do NOT attempt to repair or adjust any electrical or mechanical functions on this product. Doing so will void this warranty.

This warranty is valid for the original retail purchaser from the date of initial retail purchase and is not transferable. Keep the original sales receipt. Proof of purchase is required to obtain warranty performance. JCS dealers, service centers, or retail stores selling JCS products do not have the right to alter, modify or any way change the terms and conditions of this warranty.

This warranty does not cover normal wear of parts or damage resulting from any of the following: negligent use or misuse of the product, use on improper voltage or current, use contrary to the operating instructions, disassembly, repair or alteration by anyone other than JCS or an authorized JCS service center. Further, the warranty does not cover: Acts of God, such as fire, flood, hurricanes and tornadoes.

What are the limits on JCS’s Liability?

JCS shall not be liable for any incidental or consequential damages caused by the breach of any express, implied or statutory warranty or condition.

Except to the extent prohibited by applicable law, any implied warranty or condition of merchantability or fitness for a particular purpose is limited in duration to the duration of the above warranty.

JCS disclaims all other warranties, conditions or representations, express, implied, statutory or otherwise.

JCS shall not be liable for any damages of any kind resulting from the purchase, use or misuse of, or inability to use the product including incidental, special,

consequential or similar damages or loss of profits, or for any breach of contract, fundamental or otherwise, or for any claim brought against purchaser by any other party.

Some provinces, states or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from province to province, state to state or jurisdiction to jurisdiction.

How to Obtain Warranty Service

In the U.S.A.

If you have any question regarding this warranty or would like to obtain warranty service, please call 1-800-253-2764and a convenient service center address will be provided to you.

In Canada

If you have any question regarding this warranty or would like to obtain warranty service, please call 1-800-253-2764and a convenient service center address will be provided to you.

In the U.S.A., this warranty is offered by Sunbeam Products, Inc. doing business as Jarden Consumer Solutions located in Boca Raton, Florida 33431. In Canada, this warranty is offered by Sunbeam Corporation (Canada) Limited doing business as Jarden Consumer Solutions, located at 20 B Hereford Street, Brampton, Ontario L6Y 0M1.


© 2008 Sunbeam Products, Inc. doing business as Jarden Consumer Solutions. All Rights Reserved. Distributed by Sunbeam Products, Inc. doing business as Jarden Consumer Solutions, Boca Raton, Florida 33431.


Printed in China



BAP1700-CN_08EFM1.qxd:BAP1700-CN_08EFM1.qxd6/25/08 9:33 AM Page 15

PERMAtechMC ionisant

purificateur d’air

avec détecteur de qualité d’air





Imprimé en Chine


Lisez les instructions avant l’utilisation.

À conserver pour consultation future.

Guide d’utilisation


Si vous avez des questions sur les purificateurs d’air après la lecture de ce guide, téléphonez au 1-800-253-2764 Amérique du Nord ou bien visiter

BAP1700-CN_08EFM1.qxd:BAP1700-CN_08EFM1.qxd6/25/08 9:33 AM Page 17



Certaines consignes de sécurité de base doivent toujours être respectées lors de l’utilisation de votre appareil électrique afin de réduire les risques d’incendie. Ces précautions incluent:

Avant d’utiliser cet appareil, lisez toutes les directives.

Afin d’éviter les risques d’incendie ou de choc électrique, branchez directement l’appareil dans une prise électrique de CA 120 V.

Si le filtre est couvert d’un sac: Retirez le sac de plastique avant l’utilisation.

Gardez le cordon loin des zones passantes. Afin d’éviter les risques d’incendie, ne placez JAMAIS le cordon sous un tapis, près d’un élément chauffant, d’un radiateur, d’un four ou d’un appareil de chauffage.

Afin de vous protéger contre les chocs électriques, N’IMMERGEZ pas cet appareil. N’utilisez pas près de l’eau.

Une surveillance attentive est nécessaire lorsque tout appareil est utilisé par des enfants ou des personnes handicapées, ou à proximité.

Débranchez toujours le purificateur d’air avant de le déplacer, d’ouvrir la grille, de changer le filtre, de le nettoyer, ou lorsqu’il n’est pas utilisé. Assurez-vousd’agrippez la fiche, et non le cordon.

N’échappez JAMAIS l’appareil et n’insérez JAMAIS aucun objet dans les ouvertures.

N’UTILISEZ PAS l’appareil si sa fiche ou son cordon sont endommagés, si son moteur ne tourne pas, suite à un mauvais fonctionnement ou s’il a été échappé ou endommagé. Retournez l’appareil au fabricant pour vérification, réglage électrique ou mécanique ou réparation.

Utilisez cet appareil à ce pour quoi il a été conçu, tel que décrit dans ce guide. Toute autre utilisation non recommandée par le fabricant peut causer un incendie, un choc électrique ou des blessures. L’utilisation d’accessoires non recommandés par

Jarden Consumer Solutions peut être dangereuse.

N’UTILISEZ PAS l’appareil à l’extérieur.

Ne JAMAIS placer l’appareil sur une surface souple comme un lit ou un sofa puisqu’il pourrait renverser et ainsi bloquer l’entrée d’air ou bien les grilles de sortie.

Gardez l’appareil à distance de toute surface chauffée et des flammes.

NE TENTEZ PAS de réparer ou de régler une fonction électrique ou mécanique de l’appareil. Ce faisant, vous annuleriez votre garantie. L’intérieur de l’appareil ne contient aucune pièce pouvant être réparée par l’utilisateur. Tout entretien doit être effectué par le personnel qualifié seulement.

AVERTISSEMENT: Afin de réduire les risques d’incendie et de choc électrique, N’UTILISEZ pas ce purificateur d’air avec un appareil de contrôle de la vitesse.

NE PLACEZ rien sur le dessus de l’appareil.

Ne JAMAIS utiliser de détergents, d’essence, de nettoyant à vitre, de cire pour meuble, de solvant à peinture ainsi que tout autre sorte de solvant domestique afin de nettoyer n’importe quelle partie de l’appareil.

Mettez toujours l’appareil en position d’arrêt avant de le débrancher.

L’ioniseur peut entraîner le développement d’une charge électrostatique sur la grille de sortie d’air. Une charge électrostatique peut être sentie si l’unité n’est pas mise à la terre correctement. Afin d’éviter une charge électrostatique, branchez la fiche à 3 lames de l’unité dans une prise mise à la terre, ou installez-lacorrectement sur un adaptateur de mise à la terre (voir SÉCURITÉ DE BRANCHEMENT). La charge électrostatique ne se produira pas lorsque l’ioniseur n’est pas en marche.

L’ioniseur contenu dans cet appareil produit moins d’ozone que les limites établies des normes de l’UL de 50ppb. Cependant, en haute concentration, l’ozone peut être dangereux pour les oiseaux et les petits animaux. Afin de prévenir une accumulation d’ozone, il est suggéré d’utiliser l’ioniseur dans une zone bien aérée tout en ayant un ventilateur en marche.

Cet appareil doit seulement être utilisé dans une pièce ou la température se situe entre 40°F/4.4°C et 110°F/44.3°C.



BAP1700-CN_08EFM1.qxd:BAP1700-CN_08EFM1.qxd6/25/08 9:33 AM Page 19


Afin de réduire les risques de chocs électriques, CE PRODUIT EST ÉQUIPÉ D'UNE FICHE À 3 LAMES, un type de fiche qui possède une mise à la terre sur la troisième lame (lame de

mise à la terre).

Le cordon possède une fiche (A) telle qu’illustrée.

Un adaptateur (C) peut être acheté afin de raccorder une fiche de

trois lames avec mise à la terre dans une prise ne possédant que deux entrées (B).

Le fil vert de mise à la terre ou bien le crochet de l’adaptateur doit être connecté sur une mise à la terre permanente par exemple vers une prise électrique mise à la terre correctement. L’adaptateur ne devrait pas être utilisé si une prise de courant mise à la terre à 3 fentes est disponible.

Cette fiche fera seulement sur une prise électrique avec mise à la terre. Si la fiche ne fait pas dans la prise, contactez un électricien qualifié afin d’installer une prise adéquate.

Il doit être branché sur un circuit de 120 volts. NE MODIFIEZ PAS LA FICHE D’AUCUNE FAÇON.


La longueur du cordon utilisé sur cet appareil a été sélectionnée afin de réduire les dangers d’emmêlement et de faire trébucher.

Si vous avez besoin d'un cordon plus long, vous pouvez vous servir d'une rallonge approuvée. La capacité nominale électrique de la rallonge doit être équivalente ou supérieure à celle du purificateur d’air (voir l’étiquette de classement sur le produit).

Assurez-vousde ne pas laisser la rallonge pendre du rebord d’un comptoir ou d’une table où les enfants peuvent la tirer et évitez les endroits où on peut trébucher dessus.



Votre purificateur d’air BionarieMD contient un filtre permanent de type HEPA qui peut enlever jusqu’à 99%

des particules de poussière et de pollen en suspension dans l’air aussi petites que 2 microns et aide à réduire la fumée, les spores de moisissures et les squames d’animaux compte tenu de l’air qui passe à travers le filtre.

Les filtres permanents peuvent être passés à l’aspirateur au bout de quelques mois afin de les nettoyer facilement.

Le pré-filtrelavable capture les plus grosses particules et allonge le cycle de nettoyage du filtre permanent.

L’ioniseur en option améliore naturellement la performance de l’appareil et aide à rafraîchir l’air.

Sa conception mince en forme de tour permet de le placer pratiquement n’importe où dans la pièce.


Votre purificateur d’air BionaireMD inclut un détecteur de particules qui mesure la qualité de l’air ambiant à l’intérieur. Lorsqu’en mode automatique, il ajustera automatiquement la vitesse du ventilateur en mode bas, moyen ou élevé afin de fournir une filtration optimale selon la concentration de particules dans l’air. Aide aussi à économiser de l’énergie en faisant fonctionner le ventilateur à vitesse élevée seulement lorsque nécessaire.


Optionnelle qui, lorsqu’en marche, relâche des ions négatifs dans l’air filtré afin d’améliorer le processus de purification d’air.

Que sont les Ions?

Les ions sont de très petites particules qui portent une charge positive ou négative. Ils sont présent de manière naturelle autour de nous: dans l’air, l’eau et sur le sol. Les ions, autant positifs que négatifs, sont sans couleur, sans odeur et entièrement inoffensifs.

Comment Fonctionne l’Ioniseur?

Les ions négatifs favorisent la purification d’air en s’attachant à de très petites particules à l’intérieur de la pièce. Ces particules prennent donc une charge négative et peuvent se joindre à des particules chargées positivement comme la poussière, le pollen, la fumée ainsi que les squames d’animaux afin de former de plus grosses particules. Les particules plus grosses seront plus facilement captées par le filtre du système.

Remarque importante:

Votre ioniseur peut à l’occasion faire des sons de craquements. Ceci est normal et se produit lorsqu’il y une petite quantité d’ions accumulés est libérée.