PR & OS Owner’s Manual
Patent 6253416
BILLY GOAT POWER RAKE AND OVERSEEDER
PR550, PR550H, PR550T, PR500HT, OS551, OS551H, PR600S, OS600S
Owner's Manual
Accessories
SLICING REEL
A complete vertislicing reel for your PR. 20" wide reel for use in grasses that require vertical cutting, and for assisting in lawn overseeding projects.
SLICING BLADES
A full set of blades for replacement. Includes new lockwashers for replacement installation.
P/N 350345 |
P/N 350347 |
Part No 350324
OVERSEEDER KIT
The new light weight Plastic Overseeding Kit is constructed of durable High Density Polypropylene with two lift handles on each side to assist in lifting the entire unit and easily converts a PR Series Power Rake into an overseeder with 4 bolts and minimal tools.
NOTE: Overseeder Conversion Kit (350328) includes Slicing Reel (350343). Part No. (350325) comes with the Overseeder Box only.
P/N 350325 / 350328
1
Replacement Parts
FLAIL BLADES
A complete set of our high quality flail blades for your PR. Includes new lock clips for replacement installation.
FLAIL SHAFTS
A full set of shafts for replacement. Includes new lock clips for replacement installation.
P/N 350186 |
P/N 350185 |
Form No F021108D
PR & OS Owner’s Manual
ABOUT THIS MANUAL
THANK YOU for purchasing a BILLY GOAT ® Power Rake/Overseeder. Your new machine has been carefully designed and manufactured to provide years of reliable and productive service. This manual provides complete operating and maintenance instructions that will help to maintain your machine in top running order. Read this manual carefully before assembling, operating, or servicing your equipment.
CONTENTS
SERIAL PLATE DATA AND SPECIFICATIONS |
|
3 |
|
|
|
||||||||||||
GENERAL SAFETY |
|
4-5 |
|
|
|||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SOUND AND VIBRATION |
|
6 |
|
|
|
|
|||||||||||
INSTRUCTION LABELS |
|
7 |
|
|
|
|
|||||||||||
PACKING CHECKLIST & ASSEMBLY |
8 |
|
|
|
|
||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
||||||
OPERATION |
|
|
9-12 |
||||||||||||||
|
|
|
|
|
|
|
|
|
|
||||||||
MAINTENANCE |
|
13 |
|
||||||||||||||
|
|
|
|
|
|
|
|
|
|||||||||
TROUBLESHOOTING AND WARRANTY PROCEDURE |
14 |
|
|
||||||||||||||
|
|
|
|
|
|
|
|||||||||||
ILLUSTRATED PARTS LIST |
|
|
15-18 |
||||||||||||||
PARTS LIST |
|
19 |
|
|
|||||||||||||
MAINTENANCE RECORD |
|
20 |
|
|
Part No 350324 |
2 |
Form No F021108D |
PR & OS Owner’s Manual
SERIAL PLATE DATA
Record the model number, serial number, date of purchase, and where purchased.
Purchase Date:
Purchased From:
Specifications
|
PR550 |
PR550H |
OS551 |
OS551H |
PR550T |
PR550HT |
PR600S |
OS600S |
|
|
|
|
|
|
|
|
|
Engine: HP |
5.5 (4.1 kW) |
5.5 (4.1 kW) |
5.5 (4.1 kW) |
5.5 (4.1 kW) |
5.5 (4.1 kW) |
5.5 (4.1 kW) |
6.0 HP (4.7kW) |
6.0 HP (4.7kW) |
|
|
|
|
|
|
|
|
|
Engine: Model |
1104020191 |
GX160T1QX2 |
1104020191 |
GX160T1QX2 |
1104020191 |
GX160T1QX2 |
EX17D50012 |
EX17D50012 |
|
|
|
|
|
|
|
|
|
Engine: Type |
B&S OHV |
HONDA OHV |
B&S OHV |
HONDA OHV |
B&S OHV |
HONDA OHV |
SUBARU |
SUBARU |
|
|
|
|
|
|
|
|
|
Engine: Fuel Capacity |
3.0 qt. (2.84 L) |
3.88 qt. (3.6 L) |
3.0 qt. (2.84 L) |
3.88 qt. (3.6 L) |
3.0 qt. (2.84 L) |
3.88 qt. (3.6 L) |
3.8 qt.(3.6 L) |
3.8 qt.(3.6 L) |
|
|
|
|
|
|
|
|
|
Engine: Oil Capacity |
0.66 qt. (0.62 L) |
0.69 qt. (0.65 L) |
0.66 qt. (0.62 L) |
0.69 qt. (0.65 L) |
0.66 qt. (0.62 L) |
0.69 qt. (0.65 L) |
0.63 qt.(0.60 L) |
0.63 qt.(0.60 L) |
|
|
|
|
|
|
|
|
|
Total Unit Weight: |
149# (67.7 kg) |
147# (66.8 kg) |
162# (73.6 kg) |
160# (72.7 kg) |
139# (63.2 kg) |
137# (62.3 kg) |
137# (62.3 kg) |
137# (62.3 kg) |
|
|
|
|
|
|
|
|
|
Engine weight: |
36# (16.3 kg) |
34# (15.4 kg) |
36# (16.3 kg) |
34# (15.4 kg) |
36# (16.3 kg) |
34# (15.4 kg) |
34# (15.4 kg) |
34# (15.4 kg) |
|
|
|
|
|
|
|
|
|
Max. operating slope |
15o |
20o |
15o |
15o |
20o |
20o |
20o |
20o |
Sound test in accordance with |
101 dB(a) |
101 dB(a) |
101 dB(a) |
101 dB(a) |
101 dB(a) |
101 dB(a) |
101 dB(a) |
101 dB(a) |
2000/14/EC |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sound at operators ear |
82 dB(a) |
82 dB(a) |
82 dB(a) |
82 dB(a) |
82 dB(a) |
82 dB(a) |
82 dB(a) |
82 dB(a) |
|
|
|
|
|
|
|
|
|
Vibration at operator position |
0.82g (8.04 |
0.82g (8.04 |
3.2g |
3.2g |
3.2g |
3.2g |
3.2g |
3.2g |
|
m/s2) |
m/s2) |
|
|
|
|
|
|
Part No 350324 |
3 |
Form No F021108D |
PR & OS Owner’s Manual
GENERAL SAFETY INSTRUCTIONS and SYMBOLS
The safety symbols shown below are used throughout this manual. You should become familiar with them before assembling, operating, or servicing this equipment.
This symbol indicates important information that will prevent injury to yourself or others.
This symbol indicates ear protection is recommended when operating this equipment.
This symbol indicates eye protection is recommended when operating this equipment.
This symbol indicates gloves should be worn when servicing this equipment.
This symbol indicates that this manual and the engine manufacturer’s manual should be read carefully before assembling, operation, or servicing this equipment.
This symbol indicates important information that will prevent damage to your BILLY GOAT ® Power Rake/Overseeder.
This symbol indicates the engine oil level should be checked before operating this equipment.
Read and make sure you thoroughly understand the following safety precautions before assembling, operating or servicing this equipment:
READ this manual and the engine manufacturer’s manual carefully before assembling, operating, or servicing this equipment.
EAR PROTECTION is recommended when operating this equipment.
EYE PROTECTION is recommended when operating this equipment.
BREATHING PROTECTION is recommended when operating this equipment.
EXHAUST from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
DO NOT operate this equipment on any unimproved forested, brushy, or grass covered land unless a spark arrester is installed on the muffler as required by Section 4442 of the California Public Resources Code. The arrester must be maintained in good working order. Other states may have similar laws. Federal laws apply on federal lands.
DO NOT run engine in an enclosed area. Exhaust gases contain carbon monoxide, an odorless and possibly fatal poison.
Part No 350324 |
4 |
Form No F021108D |
Part No 350324
PR & OS Owner’s Manual
DO NOT run this equipment indoors or in any poorly ventilated area. Refueling outdoors is recommended.
DO NOT refuel this equipment while the engine is running. Allow engine to cool for at least two minutes before refueling.
DO NOT store gasoline near an open flame.
DO NOT remove gas cap while engine is running.
DO NOT start or operate engine if strong odor of gasoline is present.
DO NOT start or operate engine if gasoline is spilled. Move equipment away from spill until gasoline has completely evaporated.
DO NOT smoke while filling the fuel tank.
DO NOT check for spark with spark plug or spark plug wire removed. Use an approved spark tester.
DO NOT operate engine without a muffler. Inspect muffler periodically and replace if necessary. If equipped with muffler deflector, inspect deflector periodically and replace if necessary.
DO NOT operate engine with grass, leaves or other combustible material near the muffler.
DO NOT touch muffler, cylinder, or cooling fins when hot. Contact with hot surfaces may cause severe burns.
DO NOT leave equipment unattended while in operation.
DO NOT park equipment on a steep grade or slope.
DO NOT operate equipment with bystanders in or near the work area.
DO NOT allow children to operate this equipment.
DO NOT operate equipment with guards removed.
DO NOT operate equipment near hot or burning debris or any toxic or explosive materials.
DO NOT operate equipment on slopes greater than specified in Specifications section of this manual.
DO NOT start engine without height adjust lever in up position and clutch bail disengaged.
DO NOT place hands or feet underneath unit, or near any moving parts.
ALWAYS remove spark plug wire when servicing equipment to prevent accidental starting. ALWAYS check fuel lines and fittings frequently for cracks or leaks. Replace if necessary. ALWAYS keep hands and feet away from moving or rotating parts.
ALWAYS store fuel in approved safety containers.
WARNING: Important
Remove all rocks, wire, string, etc. that can present a hazard during work prior to starting.
DO identify and mark all fixed objects to be avoided during work such as sprinkler heads, water valves, buried cables, or clothes line anchors, etc.
5 |
Form No F021108D |
PR & OS Owner’s Manual
SOUND
SOUND LEVEL 82 dB(a) at Operators Position
Sound tests were conducted in accordance with 2000/14/EC, and were performed on 2-13-2002 under the conditions listed below.
Sound power level listed is the highest value for any model covered in this manual. Please refer to serial plate on the unit for the sound power level for your model.
General Conditions: |
Sunny |
Temperature: |
48oF (8.9oC) |
Wind Speed: |
2 mph (3.2 kmh) |
Wind Direction: |
South East |
Humidity: |
29% |
Barometric Pressure: |
30.34Hg (770 mm Hg) |
VIBRATION DATA
VIBRATION LEVEL .82g (8.04m/s2)
Vibration levels at the operator’s handles were measured in the vertical, lateral and longitudinal directions using calibrated vibration test equipment. Tests were performed on 5-25-2006 under the conditions listed below.
General Conditions: |
Sunny |
Temperature: |
72.32oF (22.4oC) |
Wind Speed: |
3.8 mph (6.12kph) |
Wind Direction: |
East |
Humidity: |
62.2% |
Barometric Pressure: |
29.9Hg (101.3kpa) |
INTENDED USE
INTENDED USE: This machine is designed for removing thatch from your lawn, renovation of existing lawns, and to assist in overseeding operations. The machine should not be used for any other purpose than that stated above.
Do not operate if excessive vibration occurs. If excessive vibration occurs, shut engine off immediately and check for damaged or worn reel, loose pulley bolts or set screws, loose engine or lodged foreign objects. (See trouble shooting section on page 14).
Part No 350324 |
6 |
Form No F021108D |