Billy Goat F1802SPV User Manual

Size:
1.42 Mb
Download

Accessories

HOLD DOWN KIT

To secure blower for transportation on trailer floors.

P/N 440120

Part No 440314

FORCE BLOWER Self-propelledOwner’s Manual

Patent #6,253,416 and other patents pending

F902SPS, F902SPH, F1302SPH, F1802SPV

BILLY GOAT FORCE BLOWER

Owner's Manual

SOLID FRONT TIRE

 

PARKING BRAKE

 

CASTER KIT

Solid flat-freefront tire.

 

Effective and Easy to

 

For greater

 

 

use to prevent blower

 

maneuverability on

 

 

from rolling.

 

hard surfaces.

P/N 440279

P/N 440140

P/N 440293

1

Form No F060811E

FORCE BLOWER Self-propelledOwner’s Manual

CONTENTS

SPECIFICATIONS AND SOUND/VIBRATION

 

___

3

 

INSTRUCTION LABELS

 

 

 

4

 

 

PACKING CHECKLIST

 

 

5

 

 

ASSEMBLY

 

 

6

 

 

OPERATION

 

 

_ 7-8

MAINTENANCE

 

 

9

 

 

 

TROUBLESHOOTING___________________________

 

10

 

ILLUSTRATED PARTS LIST

 

 

11

 

PARTS LIST

 

 

12

 

Go to http://www.billygoat.com forFrench-Canadiantranslations of the product manuals. Visitezhttp://www.billygoat.com pour la versioncanadienne-françaisedes manuels de produits

Part No 440314

2

Form No F060811E

FORCE BLOWER Self-propelledOwner’s Manual

Specifications

F902SPS

F902SPH

F1302SPH

F1802SPV

 

 

 

 

 

Engine: HP

9.0 HP (6.6kW)

9.0 HP (6.6kW)

13.0 HP (9.6kW)

18 HP (13.42kW)

 

 

 

 

 

Engine: Model

EX270D50021

GX270K1QA2

GX390K1QAA2

3564420224E9

 

 

 

 

 

Engine: Type

SUBARU OHC

HONDA OHV

HONDA OHV

B & S VANGUARD

 

 

 

 

 

Engine: Fuel Capacity

6.4 qt. (6.1L)

6.3 qt. (6.0L)

6.5 qt. (6.1L)

9 qt. (8.52L)

 

 

 

 

 

Engine: Oil Capacity

1.05 qt. (1.0L)

1.16 qt. (1.1L)

1.16 qt. (1.1L)

1.75 qt. (1.66L)

 

 

 

 

 

Total Unit Weight:

141 # (64 Kg)

152 # (68.9 Kg)

167 # (75.7 Kg)

182 # (82.6 Kg)

 

 

 

 

 

Overall Length:

58"(1.43m)

58"(1.43m)

58"(1.43m)

58"(1.43m)

 

 

 

 

 

Overall Width

29.25” (0.74m)

29.25” (0.74m)

29.25” (0.74m)

29.25” (0.74m)

 

 

 

 

 

Overall Height

45" (1.14m)

45" (1.14m)

45" (1.14m)

45" (1.14m)

 

 

 

 

 

In compliance with 2000/14/EEC

107dB(a) @3340

109dB(a) @ 3660

110dB(a) @ 3640 rpm

117dB(a)

standards

rpm

rpm

 

 

 

 

 

 

 

Sound at Operator’s ears

87dB(a) @ 3340 rpm

89dB(a) @ 3660 rpm

90dB(a) @ 3640 rpm

97dB(a)

 

 

 

 

 

Vibration at operator position

.96 g (9.44 m/s2)

1.05 g (10.30 m/s2)

.81 g (7.96 m/s2)

1.2 g (11.9 m/s2)

SOUND

117 dB

SOUND LEVEL 97 Db(a) at Operators Position

Sound tests were conducted in accordance with 2000/14/EC, as well as ISO 11094, and were performed on 12-12-2006under the conditions listed below.

Sound power level listed is the highest value for any model covered in this manual. Please refer to serial plate on the unit for the sound power level for your model.

General Conditions:

Sunny

Temperature:

40.4oF (4.7oC)

Wind Speed:

6.1 mph (9.9kph)

Wind Direction:

Southwest

Humidity:

93.6%

Barometric Pressure:

30Hg (101.85kpa)

VIBRATION DATA

VIBRATION LEVEL 1.2g (11.9m/s2)

Vibration levels at the operator’s handles were measured in the vertical, lateral and longitudinal directions using calibrated vibration test equipment. Tests were performed on 12-13-2006under the conditions listed below.

General Conditions:

Sunny

Temperature:

57.2oF (14.3oC)

Wind Speed:

11.8 mph (19.1kph)

Wind Direction:

South

Humidity:

46.4%

Barometric Pressure:

30.1Hg (101.96kpa)

Part No 440314

3

Form No F060811E

FORCE BLOWER Self-propelledOwner’s Manual

INSTRUCTION LABELS

The labels shown below were installed on your BILLY GOAT ® FORCE Blower. If any labels are damaged or missing, replace them before operating this equipment. Item numbers from the Illustrated Parts List and part numbers are provided for convenience in ordering replacement labels. The correct position for each label may be determined by referring to the Figure and Item numbers shown.

LABEL SPARK ARRESTOR

LABEL READ OWNERS MANUAL LABEL EAR EYE BREATHING

DANGER FLYING DEBRIS

P/N 100252

ITEM #44 P/N890301

ITEM# 45 P/N890254

 

ITEM # 46 P/N 810736

 

 

 

 

 

 

 

 

 

 

 

 

START

 

LABEL CLUTCH ENGAGE

LABEL EXPLOSIVE FUEL

LABEL OIL CHAIN

 

LABEL THROTTLE CONTROL

P/N 500176

ITEM # 43 P/N 400268

ITEM #119 P/N 830502

 

ITEM # 42 P/N 810656

 

 

 

 

 

STOP

 

ENGINE LABELS

 

 

 

 

 

 

 

 

 

 

HONDA

 

SUBARU

 

 

READ OWNER’S MANUAL BEFORE OPERATION.

OIL ALERT

 

 

 

 

LIRE LE MANUEL D UTILISATEUR AVANT USAGE.

 

 

 

 

 

 

 

 

VOR INBETRIEBNAHME UNBEDINGHT BEDIENUNGSANLEITUNG DURCHLESEN.

WHEN OIL LEVELLOW,

 

 

 

 

 

 

 

 

 

 

 

 

NO UTILIZAR SINANTES NO HABER LEIDO EL MANUAL

ENGINE STOPS IMMEDIATELY.

 

 

 

 

 

 

 

 

 

 

 

 

HONDA MOTOR CO. , LTD. MADE IN JAPAN

BRIGGS AND STRATTON VANGUARD

Part No 440314

4

Form No F060811E

FORCE BLOWER Self-propelledOwner’s Manual

PACKING CHECKLIST

These items should be included in your carton. If any of these parts are missing, contact your dealer.

Your BILLY GOAT ® FORCE Blower was shipped in one carton, completely assembled except for the Upper Handle Assembly and Front Diverter. Mounting hardware for the Upper Handle Assembly can be found in the parts bag.

READ all safety instructions before assembling unit.

TAKE CAUTION when removing the unit from the box as the Handle Assembly is attached to the unit by cables.

PUT OIL IN ENGINE BEFORE STARTING

PARTS BAG & LITERATURE ASSY

Warranty card P/N- 400972, Owner’s Manual P/N-440314,General Safety and Warnings Manual P/N- 100294, Declaration of ConformityP/N-440022,HandleHardware-Items#10, #11, #74, #36, and #123

Boxing Parts Checklist

Front Air Diverter

(For F902S, F902H, and F1302H models only)

Item#38

F9 MODELS P/N-440045-4

F13 MODELS P/N-440045-5

Handle Upper Assembly

Item #30 P/N-440035

Parts Bag & Literature Assy

P/N-440267

Honda 9 or 13 hp

Subaru 9 hp

B & S Vanguard 18 hp

Part No 440314

5

Form No F060811E

FORCE BLOWER Self-propelledOwner’s Manual

ASSEMBLY

1.Follow the steps in figures A and B, then securely tighten all hardware shown.2.Connect spark plug wire.

Figure A

Figure B

The hardware for attaching the upper handle to the lower is in the parts bag. Install upper handle (item 30), to preassembled lower handle (item 28) by sliding the upper over and down the outside of the lower handle. Using bolt (items #36 and 123), washers (item #10) & lock nut (item #11) to install upper handle to lower handle. Note: The Pigtail bolt should go on the side that the pull start is on and the open end should be facing down. Finish installing the other side of the upper handle assembly using screw and lock nut provided.

The throttle control will be attached to the throttle arm on the engine and wrapped around the engine for shipping. Unwrap and secure throttle control (item #31) to upper handle with screws (item #39). Screws will already be mounted in handle, simply remove and use to mount the throttle control. Secure the throttle cable and clutch cable with two Ty-wraps.TheAim-and-ShootTM is not attached, you will need to unroll the cable and attach the ball end to the lever and seat the cable end into the hole on the saddle clamp, with the cable running through the slot. The Clutch cable will also be wrapped up under the machine. Route the cable under the axle and attach it by removing the hitch pin and clevis pin and attaching it to the clutch control lever. After it is attached pull on the cable and slide it into the hole on the bracket so that it clicks into place. To keep the cable from being damaged use threety-wraps(item 74) to secure it to the handle as shown making sure that the cable is not rubbing against the tire.Note:the cable should be seated properly in the saddle and should follow the contours of the handle.

 

 

Good routing

Bad routing

Two ½” open ended wrenches

Part No 440314

One 5/16 open ended wrench

6

Form No F060811E

FORCE BLOWER Self-propelledOwner’s Manual

OPERATION

DRIVE LEVER:

To engage the clutch for forward motion, simply hold down the clutch lever with your left hand while the engine is running,

this will cause the drive to engage and the machine will proceed to move forward. Caution: It is not recommended to “feather” the drive. The drive lever should be either fully engaged or fully disengaged. Failure to do so can cause premature failure of the cone clutch in the transmission. This type of failure will void the manufacturer’s warranty.

BLOWING OPERATION

Your Billy Goat Force blower is equipped with an air director cone and the patented Aim-N-ShootTM control lever to allow the operator to direct the air stream up or down as required to assist in moving debris. This feature is extremely useful when debris has piled up to the point that it cannot be blown any farther. The air stream can be directed upward to blow the top of the debris pile over and allow the operator to continue moving more debris farther.

ADJUSTING AIR DIRECTOR

To adjust air direction, squeeze Aim-N-ShootTM control lever. When you want to blow debris at the same angle for an extended period, choose a suitable position and use the finger controlled push button lock to lock the cone in position. For operations that do not require the use of theAim-N-ShootTM feature the manual adjustment knob, pictured below, can

be used to permanently lock the cone into position. CAUTION: Be sure to release the knob when returning to using theAim-N-ShootTM.

DO NOT position director cone to where it will blow debris towards people, vehicles or other objects in vicinity. Flying debris may damage, harm, or cause injury to people or objects in air flow range.

Manual Adjustment knob

FRONT DIVERTER POSITIONING (F9 and F13 models only)

The removable front diverter adapter can be slipped inside the cone to direct the air stream forward. First turn off engine, and then simply collapse and fold in the larger opening of the diverter and slide inside the cone and allow it to expand. Then position to the desired angle by rotating the diverter. This option is extremely useful for cleaning out long cracks in pavement or for cleaning under bushes, building overhangs or along curbs.

WARNING: Unit will be more difficult to control due to the air exiting the unit. Keep hands on the unit at all times when using the front diverter. Please note that theAim-N-ShootTM feature will not function when the Front Diverter is installed

 

Squeeze and fold

 

Front diverter

 

 

 

here

 

 

 

 

 

 

 

 

 

 

Part No 440314

7

Form No F060811E

Idler Pulley

FORCE BLOWER Self-propelledOwner’s Manual

MAINTENANCE

Periodic maintenance should be performed at the following intervals:

Maintenance Operation

Every

Daily or Every

Every 25

Every 50

Every

 

Use

5 Hours

Hours

Hours

100-150

 

 

 

 

 

Hours

 

 

 

 

 

 

Inspect for worn or damaged parts.

z

 

 

 

 

 

 

 

 

 

 

Check for excessive vibration

 

z

 

 

 

 

 

 

 

 

 

Check belt/chain tightness

z

 

 

 

 

 

 

 

 

 

 

Oil drive chain

 

z

 

 

 

 

 

 

 

 

 

Inspect Impeller for cracks or damage

 

 

 

 

z

 

 

 

 

 

 

Inspect for loose parts.

 

z

 

 

 

 

 

 

 

 

 

IMPELLER REMOVAL

1.Wait for engine to cool and disconnect spark plug.

2.Remove housing front cover, by removing (11) bolts and nuts, items #13 & #14, around outside of front cover.

3.Remove impeller bolt (item #35), lock washer (item #71) and washer (item #34).

4.DO NOT pry on impeller. Pull on center hub area only of impeller. Using a penetrating oil can help loosen a stuck impeller.

5.Reinstall new impeller in reverse order of removal.

6.Tighten impeller bolt. Torque impeller bolt (see parts list on page 15 for proper impeller bolt torque specifications).

TIRE AIR PRESSURE

Check at regular intervals and maintain.

Front Tires - 24 Psi (165 kPa).

Rear Tires - 20 Psi (137 kPa).

BELT TENSION ADJUSTMENT

DO NOT ADJUST WHILE THE MACHINE IS RUNNING!

1.Wait for engine to cool and disconnect spark plug.

2.Loosen the nut (item 92) on the Idler pulley (item 93) but do not remove it. This should allow the pulley to slide left or right. Once the pulley is at the proper distance to apply tension to the belt tighten the nut. Note: Do not place too much tension on the belt, as it will cause premature failure.

3.Reattach the spark plug.

BELT REPLACEMENT

1. Wait for engine to cool and disconnect spark plug. 2.Follow the Impeller removal steps (2-5on page 12).

3.Remove the four bolts (item 8) holding the back plate (item 4) to the back housing (item 6).

4.Loosen the nut on the idler pulley and slide it to the right to relieve tension on the belt.

5.Slip the belt (item 86) off the engine pulley and the transmission.

6 Replace the belt with a new one and slide the Idler pulley to put proper tension on the belt. Note: Do not place too much tension on the belt, as it will cause premature failure.

7. Reassemble the machine in reverse order. Note: You will need to replace the Impeller bolt and torque to the proper specifications see page 16,DO NOT use the old one.

8. Reconnect spark plug wire.

Part No 440314

8

Form No F060811E

FORCE BLOWER Self-propelledOwner’s Manual

DRIVE CHAIN REPLACEMENT

1.Wait for engine to cool and disconnect spark plug.

2.Place a block of wood, or another object that will support and steady the unit under the axle on the side of the machine you will be working on.

3.Remove the two screws (item 103) holding the chain guard (item 104) and then remove the chain guard.

4.Loosen the two nuts (item 98) holding the bearing (item 97).

5.Remove the retaining ring holding the wheel on and then slide the wheel off.

6.Replace the chain (item 105). Remove the old chain by walking it off the sprockets.

7.Position the bearing so that it applies the proper tension to the chain and tighten the nuts holding the bearing Note: DO NOT over tighten the chain, as this will cause premature failure. Likewise if the chain is too loose it will come off when the drive is engaged.

8.Reassemble the machine using steps 1-4in reverse order.

Loosen these nuts

CLUTCH CABLE ADJUSTMENT

1.With the machine off, loosen the two nuts on the end of the clutch cable (item 111) going in to the transmission.

2.By moving the position up or down on the threads it will change the tension on the clutch lever (item 113). Note: Do not position it too high on the threads as this could cause the drive not to engage. Likewise, if it is placed too low the drive may stay permanently engaged. The optimum setting is to remove any slack in the clutch cable when disengaged. The travel of the clutch control will apply the correct spring force on the cone clutch. Once the desired position is in place tighten the nuts securely.

3.Start the machine and check the operation. If the drive cable is not engaging properly, shut the machine off and reposition the nuts on the cable to tighten the drive cable.

TROUBLESHOOTING

 

P ro b le m

 

 

 

P o s s ib le C a u s e

 

 

 

 

S o lu tio n

 

A b n o rm a l v ib ra tio n .

· L o o s e

o r o u t o f b a la n c e

im p e lle r .

· C h e c k

im p e lle r a n d re p la c e

if re q u ire d .

 

 

· D e b ris

in im p e lle r.

 

· C le a r d e b ris w ith c o m p re s s e d a ir o r a

 

 

 

 

 

 

 

 

b a c k p a c k b lo w e r (s e e b e lo w p ic tu re s ).*

 

 

· L o o s e e n g in e .

 

 

· C h e c k e n g in e .

 

 

 

 

 

 

 

 

 

E n g in e

w ill n o t s ta rt.

· E n g in e

n o t in fu ll c h o k e

p o s itio n .

· C h e c k

c h o k e p o s itio n .

 

 

 

· O u t o f g a s o lin e

o r b a d , o ld g a s o lin e .

· C h e c k

g a s o lin e .

 

 

 

· S p a rk P lu g w ire

d is c o n n e c te d .

· C o n n e c t s p a rk p lu g w ire .

 

 

 

· G a s v a lv e o ff.

 

 

· T u rn o n g a s v a lv e .

 

 

 

· D irty

a ir c le a n e r .

 

· C le a n

o r re p la c e a ir c le a n e r. C o n ta c t a

 

 

 

 

 

 

 

 

q u a lifie d

s e rv ic e p e rs o n .

 

E n g in e

is lo c k e d , w ill n o t p u ll

· E n g in e

p ro b le m .

 

· C o n ta c t a n

e n g in e s e rv ic in g

d e a le r fo r

o v e r .

 

 

 

 

 

 

 

e n g in e p ro b le m s .

 

A im - N - S h o o t T M le v e r s tic k in g

· D e b ris

s tu c k a ro u n d c o n e

· C le a n

d e b is

 

 

 

· C o n e a d ju s tm e n t k n o b to o tig h t

· A p p ly s ilic o n e b a s e d lu b ric a n t to

 

 

· A d a p to r m o u n t n u t (ite m

3 8 ) to o

p iv o t p o in ts

 

 

 

 

tig h t

 

 

 

 

 

· L o o s e n

m a n u a l a d ju s tm e n t k n o b

 

 

 

 

 

 

 

 

· L o o s e n

n u t

 

 

N o s e lf p ro p e llin g

D riv e

le v e r n o t e n g a g e d

 

E n g a g e

d riv e le v e r

 

 

 

D riv e

b e lt w o rn o r b ro k e n

 

C h e c k

d riv e

b e lt

 

 

 

D riv e

c h a in

o ff th e s p ro c k e ts

C h e c k

d riv e

c h a in

 

 

 

D riv e

c a b le

is o u t o f a d ju s tm e n t

C h e c k

d riv e

c a b le (s e e p a g e

1 3 )

S e lf P ro p e lle d d riv e w ill n o t

Im p ro p e r d riv e c a b le a d ju s tm e n t, o r

 

 

 

 

 

 

re le a s e

 

c a b le

is

k in k e d

 

 

C h e c k

th e

d riv e c a b le (s e e p a g e 1 3 )

N o is y o r b ro k e n c h a in

N o c h a in o r lu b ric a tio n

 

L u b ric a te

c h a in

 

 

 

C h a in

te n s io n

 

 

C h e c k

d riv e

c h a in (s e e p a g e

1 3 )

*Using compressed air, or a Backpack blower, you can loosen or free debris easily from the impeller and housing, which can cause wear and tear on the machine. You can manually remove debris by taking off the front housing. Note: Always disconnect the spark plug when servicing.

Part No 440314

9

Form No F060811E

FORCE BLOWER Self-propelledOwner’s Manual

ILLUSTRATED PARTS LIST

Part No 440314

10

Form No F060811E

FORCE BLOWER Self-propelledOwner’s Manual

PARTS LIST

 

 

 

F1302SPH

 

F902SPH

 

F902SPS

 

F1802SPV

 

 

 

ITEM NO.

DESCRIPTION

PART NUMBER

QTY.

PART NUMBER

QTY.

PART NUMBER

QTY.

PART NUMBER

QTY.

 

 

1

ENGINE 13 HP HONDA GX390

440018

1

-

-

-

-

-

-

 

 

 

ENGINE 9 HP HONDA GX270

-

-

430287

1

-

-

-

-

 

 

 

ENGINE 9 HP HORZ SUBARU OHC

-

-

-

-

430413

1

-

-

 

 

 

ENGINE 18 VANGUARD

-

-

-

-

-

-

812240

1

 

 

2

BASE ENGINE WA FSP

440244-S

1

440244-S

1

440244-S

1

440244-S

1

 

 

3

GUARD BELT UPPER FSP

440209

1

440209

1

440209

1

440209

1

 

 

4

PLATE REINFORCE HOUSING

440010

1

440010

1

440010

1

440010

1

 

 

5

HOUSING FRONT MOLDED

440023

1

440023

1

440023

1

440023

1

 

 

6

HOUSING BACK MOLDED

440024

1

440024

1

440024

1

440024

1

 

 

7

WASHER LOCK 3/8 S/T MED

8177012

4

8177013

5

8177013

5

8177013

4

 

 

8

SCREW CAP 3/8-16X2 ZP

8041054

4

8041054

4

8041054

4

8041054

4

 

 

9

ROD HAND STOP

440057

1

440057

1

440057

1

440057

1

 

 

10

WASHER 5/16 FLATWASHER Z/P

8171003

14

8171003

14

8171003

14

8171003

14

 

 

11

NYLON INSERT LOCKNUT 5/16-18

8160002

11

8160002

11

8160002

11

8160002

11

 

 

12

SCREWCAP 5/16-18X 1.75 ZP

8041031

4

8041031

4

8041031

4

8041031

2

 

 

13

SCREWCAP 1/4-20x 1 1/2

8041008

11

8041008

11

8041008

11

8041008

11

 

 

14

NUT FLANGE 1/4-20

900455

15

900455

15

900455

15

900455

15

 

 

15

WHEEL & TIRE 13" X 5" PNEUMATIC SPROCK

440219

2

440219

2

440219

2

440219

2

 

 

16

RING RETAINING 3/4

850230

2

850230

2

850230

2

850230

2

 

 

17

SCREW SM 1/4" X 3/4" TYPE AB HX WF

8122082

7

8122082

7

8122082

7

-

-

 

 

18

WHEEL ASSY 10 " PNEUMATIC

400295

1

400295

1

400295

1

400295

1

 

 

19

SPACER FRONT AXLE

440220

1

440220

1

440220

1

440220

1

 

 

20

SPACER LH WHEEL FRONT

440224

1

440224

1

440224

1

440224

1

 

 

21

SPACER RH WHEEL FRONT

440221

1

440221

1

440221

1

440221

1

 

 

22

SCREWCAP 1/2-13x 9 1/2"

8041240

1

8041240

1

8041240

1

8041240

1

 

 

23

WASHER FLAT 1/2" SAE

8172011

2

8172011

2

8172011

2

8172011

2

 

 

24

WASHER W/BOLT WA

440075

1

440075

1

440075

1

440075

1

 

 

25

KNOB 3/8-16SOLID HUB

811230

1

811230

1

811230

1

811230

1

 

 

26

WASHER 2.25 OD x .515 ID x .134 ZP

610308-P

1

610308-P

1

610308-P

1

610308-P

1

 

 

27

BRACKET HOLDER WA

440240

1

440240

1

440240

1

-

-

 

 

28

HANDLE LOWER

440034

1

440034

1

440034

1

440034

1

 

 

29

NYLON INSERT LOCKNUT 1/2-13LTWT TH ZP

8161044

1

8161044

1

8161044

1

8161044

1

 

 

30

HANDLE UPPER

440035

1

440035

1

440035

1

440035

1

 

 

31

CONTROL THROTTLE

440013

1

440013

1

440013

1

440013

1

 

 

32

CABLE THROTTLE CONTROL

440014

1

440014

1

440014

1

440178

1

 

 

33

NUT LOCK 3/8-16LT WT THIN ZP

8161042

3

8161042

3

8161042

3

8161042

3

 

 

34

WASHER 1.5 O.D.X 0.45 I.D. X 0.5

440176

1

440176

1

440176

1

440176

1

 

 

35

SCREWCAP 3/8-24X 3.5 GR. 8 (38+/-2ft-lbs.)

440151

1

-

-

-

-

-

-

 

 

 

SCREWCAP 7/16-20X 3.5 GR.8 (60+/-2ft-lbs)

-

-

440150

1

440150

1

-

-

 

 

 

SCREWCAP 3/8-24X 4 GR.8 (38+/-2ft-lbs)

-

-

-

-

-

-

8042062

1

 

 

36

SCREWCAP 5/16"-18X 2" ZP

8041032

1

8041032

1

8041032

1

8041032

2

 

 

37

DIRECTOR CONE 5"

440044-S

1

-

-

-

-

-

-

 

 

 

DIRECTOR CONE 4"

-

-

440046-S

1

440046-S

1

-

-

 

 

 

DIRECTOR CONE 6"

-

-

-

-

-

-

440170-S

1

 

 

38

DIVERTOR FRONT

440045-5

1

440045-4

1

440045-4

1

-

-

 

 

39

SCREW SM #10-24X1/2"DRILL POINT

8122064

2

8122064

2

8122064

2

8122064

2

 

 

40

IMPELLER ASSEMBLY 17"

440236

1

440236

1

440236

1

-

-

 

 

 

IMPELLER SERVICE ASSY FORCE 18HP

-

-

-

-

-

-

440162

1

 

 

41

GRILL FRONT BLOWER

440067-1-S

1

440067-1-S

1

440067-1-S

1

440171-S

1

 

 

42

LABEL THROTTLE CONTROL

810656

1

810656

1

810656

1

810656

1

 

 

43

LABEL FUEL EN/SP

-

-

-

-

100261

1

100261

1

 

 

44

LABEL READ

890301

1

890301

1

890301

1

890301

1

 

 

45

LABEL EAR EYE BREATHING

890254

1

890254

1

890254

1

890254

1

 

 

46

LABEL DANGER FLYING DEBRIS

810736

1

810736

1

810736

1

810736

1

 

 

48

LABEL FORCE

440269

1

440269

1

440269

1

440269

1

 

 

49

HANDLE ASSY

440104

1

440104

1

440104

1

440104

1

 

 

50

KEY 1/4" SQ x 3 1/4

9201128

1

9201128

1

9201128

1

-

-

 

 

 

KEY 1/4" SQ x 2 3/4

-

-

-

-

-

-

9201130

1

 

 

51

SCREWCAP 1/4-20X 1" HCS ZP

-

-

-

-

-

-

8041006

5

 

 

52

WASHER FLAT 1/4

-

-

-

-

-

-

8171002

5

 

 

53

NUT LOCK 1/4"-20HEX ZP

8160001

1

8160001

1

8160001

1

8160001

6

 

 

54

HANDLE DIVERTER FORCE

440119

1

440119

1

440119

1

440119

1

 

 

55

PIN LATCH DIVERTER

440118

1

440118

1

440118

1

440118

1

 

 

56

SPRING COMPRESSION 0.281 X 0.88

440129

1

440129

1

440129

1

440129

1

 

 

57

RING RETAINING .122 DIA

440125

1

440125

1

440125

1

440125

1

 

 

58

SADDLE UPPER DIVERTER

440115

1

440115

1

440115

1

440115

1

 

 

59

PLATE LOCK DIVERTER

440116

1

440116

1

440116

1

440116

1

 

 

60

SCREW PLASTITE #6-19X 5/8"

440126

1

440126

1

440126

1

440126

1

 

 

61

SADDLE LOWER DIVERTER

440114

1

440114

1

440114

1

440114

1

 

 

62

SCREW PLASTITE #10-14X 1"

440132

2

440132

2

440132

2

440132

2

 

 

63

PIN PIVOT DIVERTER CONTROL

440123

1

440123

1

440123

1

440123

1

 

 

64

RING RETAINING 5/16

430327

1

430327

1

430327

1

430327

1

 

Part No 440314

 

11

 

 

 

 

Form No F060811E

FORCE BLOWER Self-propelledOwner’s Manual

PARTS LIST

 

 

F1302SPH

 

F902SPH

 

F902SPS

 

F1802SPV

 

ITEM NO.

DESCRIPTION

PART NUMBER

QTY.

PART NUMBER

QTY.

PART NUMBER

QTY.

PART NUMBER

QTY.

65

CABLE ASSY

440117

1

440117

1

440117

1

440117

1

66

DIVERTER PIVOT ADAPTOR

440121

1

440121

1

440121

1

440121

1

67

SPRING EXTENSION 0.468 X 5.25

440130

1

440130

1

440130

1

440130

1

68

BRACKET DIVERTER FORCE

440212

1

440212

1

440212

1

440212

1

69

PIN CLEVIS 1/4 X 3/4

440124

2

440124

2

440124

2

440124

2

70

HITCH PIN CLIP .051 X 3/4"

440193

2

440193

2

440193

2

440193

2

71

WASHER LOCK 3/8 S/T MED

8177012

1

-

-

-

-

8177012

1

 

WASHER LOCK 7/16 S/T MED

-

-

8177013

1

8177013

1

-

-

72

ADAPTOR MOUNT WA

440122

1

440122

1

440122

1

440122

1

73

GRIP 1-1/4"ID x 9.5" LONG

440146

2

440146

2

440146

2

440146

2

74

TY-WRAP

900407

5

900407

5

900407

5

900407

5

75

WASHER .765 ID X 1.25 OD X0.6"

850238

2

850238

2

850238

2

850238

2

76

FORCE WHEEL BEARING .751 ID

440055

2

440055

2

440055

2

440055

2

77

GUARD MANIFOLD

-

-

-

-

-

-

812243

1

78

GUARD MUFFLER

-

-

-

-

-

-

812242

1

81

ROLL PIN

8195096

1

8195096

1

8195096

1

8195096

1

82

SPACER REAR WHEEL SP

440225

2

440225

2

440225

2

440225

2

83

PLUG

791056

2

791056

2

791056

2

791056

2

84

CARRIAGE BOLT 3/8"-16X 1 3/4" ZP

8024061

5

8024061

5

8024061

5

8024061

5

85

SPACER ENGINE FACE

440174

1

440174

1

440174

1

440174

1

86

BELT 3L29

440215

1

440215

1

440215

1

440215

1

87

SPACER HUB 1" ID X 1.25" W/PULLEY

440213

1

440213

1

440213

1

-

-

 

SPACER HUB 1" ID X 1.25" W/PULLEY FSP18

-

-

-

-

-

-

440214

1

88

CARRIAGE BOLT 3/8-16X 5" ZP

8024161

1

8024161

1

8024161

1

8024161

1

89

TUBE SPACER .625" OD X .357 LONG

440228

1

440228

1

440228

1

440228

1

90

GUARD BELT LOWER FSP

440210

2

440210

2

440210

2

440210

2

91

SCREW PLASTITE 1/4-10X 3/4 HWH ZP

840082

6

840082

6

840082

6

840082

6

92

SCREW SM 1/4" X 1" DRILL PT

-

-

-

-

-

-

430208

2

93

PULLER V IDLER 2.5

510137

1

510137

1

510137

1

510137

1

94

WASHER 1.00" OD X .380 SQ HOLE

440227

1

440227

1

440227

1

440227

1

96

CARRIAGE BOLT 1/4"-20X 3/4"

8024021

4

8024021

4

8024021

4

8024021

4

97

BEARING 1/2" STEEL PRESSED HOUSING

891025

2

891025

2

891025

2

891025

2

99

KEY WOODRUFF 1/8" X 1/2"

510180

2

510180

2

510180

2

510180

2

100

SPROCKET 8 TOOTH

891022

2

891022

2

891022

2

891022

2

101

RETAINING RING 1/2"

350146

2

350146

2

350146

2

350146

2

102

SPROCKET 32T #43 1.594 BORE

440218

2

440218

2

440218

2

440218

2

103

SCREW SELF TAP 1/4"-20X 5/8"

890359

4

890359

4

890359

4

890359

6

104

CHAIN GUARD LH

440206-S

1

440206-S

1

440206-S

1

440206-S

1

 

CHAIN GUARD RH

440207-S

1

440207-S

1

440207-S

1

440207-S

1

105

CHAIN #43X44 PITCHES

440217

2

440217

2

440217

2

440217

2

108

TRANS SINGLE SPEED W/CLUTCH

440216

1

440216

1

440216

1

440216

1

109

WASHER 3/8" SAE

8172009

2

8172009

2

8172009

2

8172009

2

111

CLUTCH CABLE FORCE SP

440243

1

440243

1

440243

1

440243

1

113

CLUTCH CONTROL ARM

440277

1

440277

1

440277

1

440277

1

114

CLUTCH CONTROL BRACKET

440245

1

440245

1

440245

1

440245

1

115

GRIP CLUTCH CONTROL FSP

440242

1

440242

1

440242

1

440242

1

117

SPARK ARRESTOR LABEL

100252

1

100252

1

100252

1

100252

1

118

SPRING LEVER GZ

610429

1

610429

1

610429

1

610429

1

119

LABEL OIL CHAIN

830502

2

830502

2

830502

2

830502

2

120

LABEL DANGER

900327

2

900327

2

900327

2

900327

2

121

NUT LOCK 5/16-24SER HEX WSHR FLNG

440274

8

440274

8

440274

8

440274

8

122

LABEL CLUTCH DRIVE

500176

1

500176

1

500176

1

500176

1

123

EYEBOLT PIGTAIL 5/16"-18X 1 1/4"

440280

1

440280

1

440280

1

440280

1

125

LABEL MADE IN U.S.A.

520116

1

520116

1

520116

1

520116

1

Part No 440314

12

Form No F060811E