Benq FP767 User Manual

Size:
3.42 Mb
Download

BenQ FP767

LCD Color Monitor

17.0" (43.2cm) LCD Panel Size

User's Manual

Copyright

Disclaimer

BenQ LCD Color Monitor User's Guide

Copyright © 2002 by BENQ Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of BENQ Corporation.

BENQ Corporation makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular purpose. Further, BENQ Corporation reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation of BENQ Corporation to notify any person of such revision or changes.

Safety

Instructions

1.

The AC plug isolates this equipment from the AC supply.

2.

Unplug this product from the wall outlet before cleaning. Clean the LCD monitor surface with

 

a lint-free,non-abrasivecloth. Avoid using any cleaning solution or glass cleaner.

3.Slots and openings on the back or top of the cabinet are provided for ventilation. They must not be blocked or covered. This product should never be placed near or over a radiator or heat register, or in a built-ininstallation unless proper ventilation is provided.

4.This product should be operated from the type of power indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company.

5.Never push objects of any kind, or spill liquid of any kind into this product.

6.Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltages or other risks. If any above mentioned misuse or other accident (dropping, mis-operations)occurs, contact qualified service personnel for servicing.

7.The power supply cord serves as a power disconnect device for pluggable equipment. The socket outlet shall be installed near the equipment and shall be easily accessible.

English 1

====

======Table

========of

===Contents

 

BenQ LCD Color Monitor User's Guide

Unpacking ..........................................................................................................................................

3

Views of the Monitor .....................................................................................................................

4

Front View ........................................................................................................................................

4

Back View (1) ...................................................................................................................................

4

Back View (2): Locations of plugs & sockets ............................................................................

5

Installation .........................................................................................................................................

6

Hardware Installation .....................................................................................................................

6

Software Installation .......................................................................................................................

8

Adjusting the Monitor ..................................................................................................................

37

A Look at the Control Panel ......................................................................................................

37

Hot Key Mode ...............................................................................................................................

37

Main Menu Mode ...........................................................................................................................

38

Troubleshooting ............................................................................................................................

43

Frequently Asked Questions (FAQ) .........................................................................................

43

Need More Help? ..........................................................................................................................

44

Supported operating modes .......................................................................................................

45

Specifications ..................................................................................................................................

46

English 2

BenQ LCD Color Monitor User's Guide

Unpacking

Please check you have the following items. If they are missing or are damaged, please contact the dealer immediately at which you purchased the good.

LCD monitor with undetachable signal cable

Quick Start Guide

CD-ROM

Power Cord

Audio Cable

Extension Base

Signal Cable

English 3

BenQ LCD Color Monitor User's Guide

Views of the Monitor

Front View

Back View (1)

English 4

BenQ LCD Color Monitor User's Guide

Back View (2): Locations of plugs & sockets

3

2

1

1. D-subconnector

2. Power AC input jack

3. Audio jack

English 5

BenQ LCD Color Monitor User's Guide

Installation

Hardware Installation

Make sure that the computer and monitor’s power are both turned off. Please follow the steps to install your LCD monitor.

1.Place the arrow on the base and the front side of the monitor in corresponding direction. The arrow on the base indicates the front of the base. Place the monitor into the base until it locks into place. There will be a clicking sound.

2.Place the monitor face down on a soft surface. Hold the back of the monitor with one hand. Using the other hand, press the release

button on the base and push outward in the direction of the arrow to detach the base extension.

3. Connect signal cable to the LCD – monitor.

English 6

BenQ LCD Color Monitor User's Guide

4. Connect the power cord to your LCD monitor. Then connect audio cable to the Audio Input of BenQ LCD Monitor.

5. Connect the other end of signal cable to the signal connector of your computer.

6. Connect the audio cable to your computer. Connect the power cord to an AC power socket.

Signal Cable

Power Cord

Audio Cable

English 7

BenQ LCD Color Monitor User's Guide

Software Installation

A. Microsoft® Windows® 95 / 98 / 2000 / XP

If you are using Windows 95, Windows 98, Windows 2000 or XP as an operating system, you have to set up the correct monitor driver.

Windows 95 The first time you start Windows with a new monitor, the system will detect it and automatically install the driver for plug and play displays. To install the current driver from CD, proceed as follows:

1.Insert “BenQ LCD MonitorCD-ROMinto yourCD-ROMDriver.

2.Click “Start” then “Settings”.

3. Double click the “Display” icon in the Control Panel. .

English 8

BenQ LCD Color Monitor User's Guide

4.From the “Display Properties” window, select the “Settings” tab. Click the “Advanced Properties" button in the bottom right corner.

5.Select the “Monitor” tab. Click the “Change” button in the top right corner.

English 9

BenQ LCD Color Monitor User's Guide

6.Now click the “Have Disk” button in the bottom right corner. When the next window appears, select the “Browse” button.

7.Insert the supplied CD into your computer. Select the CD-drivefrom thedrop-downmenu.

8.In the field above the drive selection, change to the "Drivers” folder. The current driver files are located there. Press “OK” and the window closes.

English 10

BenQ LCD Color Monitor User's Guide

9.By pressing “OK” again in the next window you will be given a list of compatible devices. Select “FP767” from the list and press “OK” again.

10.You are now back at “Advanced Display Properties”. Close this window by clicking “OK “ and confirm the following messages with “Yes”. Click “OK” and “Yes” again. The installation is now completed. You can close “Display Properties”.

English 11

BenQ LCD Color Monitor User's Guide

Windows 98 To manually install or update the driver, perform the following steps: 1.

1.Open the control panel and double-click"Display" icon. .

2.From the "Display Properties" window, select the "Settings" tab. Click the "Advanced..." button in the bottom right corner. .

English 12

BenQ LCD Color Monitor User's Guide

3.Select the "Monitor" tab. Click the "Change" button in the top right corner.

4.The "Update Device Driver Wizard" opens. Confirm by clicking "Next".

English 13

BenQ LCD Color Monitor User's Guide

5.Select "Display a list of all drivers in a specific location, so you can select the driver you want." and press "Next".

6.Now click the “Have Disk” button in the bottom right corner. Another window appears, select the “Browse” button.

English 14

BenQ LCD Color Monitor User's Guide

7.Insert the supplied CD into your computer. Select the CD-drivefrom thedrop-downmenu. .

8.By pressing “OK” again in the next window you will be given a list of compatible devices. Select “FP767” from the list and press “Next” again.

9.An “Insert Disk” dialogue box appears. Click “OK”, and then click “Skip File.”

English 15

BenQ LCD Color Monitor User's Guide

10. Close “Update Device Driver Wizard” by clicking “Finish” to complete the installation.

English 16

BenQ LCD Color Monitor User's Guide

Windows 2000 The first time you start Windows with a new monitor, the system will detect it and automatically start the “Add New Hardware Wizard”. Carry out the instructions beginning at step 4.

1.Insert “BenQ LCD MonitorCD-ROMinto yourCD-ROMDriver.

2.Click “Start” then “Settings”.

3.Open the Control Panel and double click on the “Display” icon.

English 17

BenQ LCD Color Monitor User's Guide

4.From the “Display Properties” window, select the “Settings” tab. Click the “Advanced...” button in the bottom right corner.

5.Select the “Monitor” tab, then click “Properties” .

English 18

BenQ LCD Color Monitor User's Guide

6.Select the “Driver” tab, then click “Update Driver.”

7.The “Upgrade Device Driver Wizard” will pop up. Then Click “Next”.

English 19

BenQ LCD Color Monitor User's Guide

8.Select “Display a list of the known drivers for this device so that I can choose a specific driver” then click “Next”.

9.In the next window, click “Have Disk”, then “Install From Disk” window will pop up, click “Browse", the “Located File” will pop up.

English 20

BenQ LCD Color Monitor User's Guide

10. Scroll down and select your CD ROM Driver, then click “Next.” .

English 21

BenQ LCD Color Monitor User's Guide

11.In the list of CD-ROM,select “Drivers” folder then click “Open” twice, then click “OK”, Select the your LCD Mode (FP767) from the list in the next window then click “Next” twice.

12. The new drivers are now installed to your computer.

English 22

BenQ LCD Color Monitor User's Guide

Windows ME To manually install or update the driver, perform the following steps:

1.Click “Start”, “Settings”, “Control Panel” and thendouble-clickDisplay”.

2.In the Display Properties window, click the “Settings” tab and click “Advanced...”.

3.Click the “Monitor” tab and then click “Change”.

4.Update Device Driver Wizard” dialogue box appears. Choose “Specify the location of the driver (Advanced)” and then click “Next”.

English 23

BenQ LCD Color Monitor User's Guide

5.Choose “Display a list of all the drivers in a specific location, so you can select the driver you want” then click “Next”.

6.Choose “Monitors” from the list, then click “Next”.

English 24

BenQ LCD Color Monitor User's Guide

7.Choose “Display a list of all the drivers in a specific location, so you can select the driver you want.”.

8.Click “Have disk” and then click “Browse...”.

9.Insert “BenQ LCD Monitor’s CD” into yourCD-ROMand type d:\ (change the driver letter to match yourCD-ROMdriver if it is not drive D). Enter “Drivers” folder to select the model from the list left. Click “OK”.

English 25

BenQ LCD Color Monitor User's Guide

10.Click “OK” on the “Install From Disk” window. The dialogue box “Update Device Driver Wizard” appears. Choose the model from the list, then click “Next”.

English 26

BenQ LCD Color Monitor User's Guide

11. Click “Next”.

12. Click “Finish” to complete the installation.

English 27

BenQ LCD Color Monitor User's Guide

Windows XP.

1.Right click mouse on the desktop and choose “Properties”. Select “Settings” tab and click the “Advanced” button. A small window will pop up. Select the “Monitor” tab in the new window and then click “Properties”.

2.Select “Driver” tab and then click “Update Driver…

English 28

BenQ LCD Color Monitor User's Guide

3.The “Hardware Update Wizard” will pop up. Then click “Next”.

4.Select “Don’t search. I will choose the driver to install” and then click “Next”.

English 29

BenQ LCD Color Monitor User's Guide

5.In the next window, click “Have Disk…”, and then “Install From Disk” window will pop up. Click “Browse”. The “Locate File” window will pop up.

English 30

BenQ LCD Color Monitor User's Guide

6.Select your driver and then click “Next”.

7.The new drivers are now installed to your computer. Click “Finish” to exit installation.

English 31

BenQ LCD Color Monitor User's Guide

B. Choosing the best resolution

Due to the technology of an LC display, it always provides a fixed resolution. For the FP767 this is a resolution of 1280x1024. This is called the "Native Resolution", which also represents the maximal resolution. Lower resolutions are displayed on a full screen through an interpolation circuit. Flaws do occur with the interpolated resolution compared to the native resolution. If you want to have all the advantages of LCD technology you must use the native resolution. Using Windows 95/ 98/ 2000/ XP you can change the resolution as follows:

1.Double-clickthe "Display" icon in the Control Panel.

2.From the "Display Properties" window, select the "Settings" tab. You can alter the resolution by using the slider on theright-handside.

3.Select a resolution of 1024x768. Then click "Apply."

English 32

BenQ LCD Color Monitor User's Guide

4.In the subsequent windows, press "OK" and "Yes."

5.You can now close "Display Properties."

English 33

BenQ LCD Color Monitor User's Guide

C. Refresh Rate Selection

There is no need to choose the highest possible refresh rate on a LC display. It is not technically possible for an LC display to flicker. Even at a refresh rate of 60 Hz you will get an absolutely flickerfree image. More important is that you make sure that you use one of the factory modes. In contrast to a modern CRT monitor, which is a multiscan monitor, the LC display is a multi-frequencymonitor. This means, the best results are only obtained by using the factory modes. You will find a table with the factory modes in this user's guide. For the native resolution of 1280x1024, these, for example, are 60, 70 and 75 Hertz, not 72 Hz; however, in Windows 95/ 98/ 2000/ XP you can change the refresh rate as follows:

1.Double click the "Display" icon in the Control Panel.

2.From the "Display Properties" window, select the "Settings" tab. Click the "Advanced..." button in the bottom right corner.

English 34

BenQ LCD Color Monitor User's Guide

3.Select the "Adapter” tab. The refresh rate selection field is located in the center at the bottom of the window.

4.Choose a refresh rate from the table with the factory modes, which can be found in the user’s guide, and select this in the settings field.

5.In the subsequent windows press "Change", "OK" and "Yes".

6.You can now close "Display Properties".

English 35

BenQ LCD Color Monitor User's Guide

D. Picture Optimization

The easiest way to obtain an optimal display is to use the ikey function. Press the “ikey” on the control panel and the monitor will adjust automatically.

If you are still not satisfied with the result, you can still adjust the image manually.

1.Run the test program auto.exe from CD-ROM,this is the best way to observe possible changes. You can also use any other image, such as the desktop of your operating system. But we recommend you to use auto.exe. As you run auto.exe, a test pattern emerges.

2.Press “Enter” on control panel to access OSD.

3.If there are vertical noises observed, press “<” or “>” key to select “FINE TUNE” and press “Enter” key. Then press ”<” or “>” key to select “CLOCK” and also press “Enter” key again. Now, press “<” or “>” to adjust the monitor till the noises disappear.

4.If there are horizontal noises observed, press “<” or “>” key to select “FINE TUNE” and press “Enter” key. Then press ”<” or “>” key to select “PHASE” and also press “Enter” key again. Now, press “<” or “>” to adjust the monitor till the noises disappear.

To make sure the “iKey” function performs well, you have to use one of the supported modes. If theikey does not work properly and the “NON PRESET MODE” message is on the OSD, it means you do not use one of the supported modes. Please set your computer to use one of the supported modes. You may find the list of supported modes in this manual.

English 36

BenQ LCD Color Monitor User's Guide

Adjusting the Monitor

A Look at the Control Panel

Exit

Enter

There are 6 keys for user’s control including “iKey”, “Exit”, “Enter”,“<” and “>” key and a power swith.The following descriptions are the introduction of these keys & switch.

1.“Power”: Turn the power on or off.

2.iKey” : Adjust vertical position, phase, horizontal position and pixel clock automatically.

3.“Exit” key: Back to main menus, save menu or exist OSD menu without saving.

4.“Enter” key: Entersub-menus,select items or save items.

5.“<”: For Left adjustment. Left key is the hot key for Contrast adjustment.

6.“>”: For Right adjustment. Right key is the hot key for Brightness adjustment.

Hot Key Mode

Contrast hot-key

1.Press Left key to activate Contrast hotkey.

2.Press Left/Right key to reduce/increase the value of contrast.

3.Press Exit key to leave the hot-keymode.

4.The scale of adjustment is 0-100.

Brightness hot-key

1.Press Right key to activate Brightness hot-key.

2.Press Left/Right key to reduce/increase the value of brightness.

3.Press Exit key to leave the hot-keymode.

4.The scale of adjustment is 0-100.

Volume hot-key

1.Press Exit key to activate Volume hotkey.

2.Press Left/Right key to reduce/increase the value of volume.

3.Press Exit key to leave the hot-keymode.

4.The scale of adjustment is 0-100.

English 37

BenQ LCD Color Monitor User's Guide

Main Menu Mode

Control Functions Available in Main Menu

Brightness

1.Press Enter key to enter brightness adjustment submenu.

2.Press Left/Right key to reduce/increase the value of brightness.

3.Press Exit key to leave the submenu.

4.The scale of adjustment is 0-100.

Contrast

1.Press Enter key to enter contrast adjustment submenu.

2.Press Left/Right key to reduce/increase the value of contrast.

3.Press Exit key to leave the submenu.

4.The scale of adjustment is 0-100.

Horizontal Position

This function can adjust the horizontal position of display on screen.

1.Press Enter key to enter horizontal position adjustment submenu.

2.Press Left/Right key to reduce/increase the value of horizontal position.

3.Press Exit key to leave the submenu.

4.The scale of adjustment is 0-100.

English 38

BenQ LCD Color Monitor User's Guide

Vertical Position

This function can adjust the vertical position of display on screen.

1.Press Enter key to enter vertical position adjustment submenu.

2.Press Left/Right key to reduce/increase the value vertical position.

3.Press Exit key to leave the submenu.

4.The scale of adjustment is 0-100.

Phase

1.Press Enter key to enter phase adjustment submenu.

2.Press Left/Right key to reduce/increase the value of phase.

3.Press Exit key to leave the submenu.

4.The scale of adjustment is 0-64.

Clock

1.Press Enter key to enter clock adjustment submenu.

2.Press Left/Right key to reduce/increase the value of clock.

3.Press Exit key to leave the submenu.

4.The scale of adjustment is 0-100.

English 39

BenQ LCD Color Monitor User's Guide

Color

This function lets user to choice color temperature from C1 to C3, or to set up user mode. C1: 9300K, C2: 6500K, C3: 5800K

1.Press Enter key to enter color select submenu.

2.Press Left/Right key to select within C1 to C3 and user define.

3.Select user define and press Enter key to enter user define submenu.

4.Select one setting within C1 to C3 and press exit to set the color temperature.

This function can adjust the setting of each color.

1.Press Enter key to enter user define submenu.

2.Press Left/Right key and Enter key to select the color to be adjusted.

3.Press Left/Right key to reduce/increase the value of each color.

4.Press Exit key to leave the submenu.

5.The scale of adjustment is 0-100.

Languages

This function lets user to select the OSD language.

De: DeutschEn: EnglishEs: EspañolFr: FrançaisIt: ItalianoJa: Japanese: Simplified Chinese : Traditional Chinese

English 40

BenQ LCD Color Monitor User's Guide

Recall

This function lets user to recover the ex-factorysettings.

1.Press Enter key to enter recall submenu.

2.Press Left/Right key to select Yes/No.

3.Press Enter to confirm the selection.

4.Press Exit key to cancel the selection and leave the submenu.

OSD Time

This function lets user to set the OSD menu lasting time.

1.Press Enter key to enter OSD time adjustment submenu.

2.Press Left/Right key to reduce/increase the lasting time.

3.Press Exit key to leave the submenu.

4.The scale of adjustment is 5-60.

Volume

1.Press Enter key to enter volume adjust submenu.

2.Press Left/Right key to reduce/increase the value of volume.

3.Press Exit key to leave the submenu.

4.The scale of adjustment is 0-100.

English 41

BenQ LCD Color Monitor User's Guide

OSD Position

This function lets user to adjust the horizontal and vertical position of OSD.

1.Press Enter key to enter OSD position adjustment submenu.

2.Press Left/Right key and Enter key to select H.P. (horizontal position) or V.P. (vertical position).

3.Press Left/Right key to adjust the position.

4.Press Exit key to leave the submenu.

5.The scale of adjustment is 0-100.

Information

This function shows display information.

1.Press Enter key to enter info display.

2.Press Exit key to leave the submenu.

English 42

BenQ LCD Color Monitor User's Guide

Troubleshooting

Frequently Asked Questions (FAQ)

The image is blurred:

Read the chapter, "Installation/Adjustment" and select the correct resolution, refresh rate and make adjustments based on these instructions.

Do you use a VGA extension cable?

Remove the extension cable for the test. Is the image now in focus? If not, optimize the image working on the description in the chapter, "Installation/Adjustment." It is normal for blurring to occur due to conduction losses in extension cables. You can minimize these losses by using an extension cable with better conduction quality or with a builtin booster.

Does the blurring only occur at resolutions lower than the native (maximum) resolution?

Read the chapter "Installation/Adjustment." Select the native resolution.

Pixel errors can be seen:

One of several pixels are permanently black, one or more pixels are permanently white, one or more pixels are permanently red, green, blue or another colour.

Read the chapter "Pixel Error Rates."

The image has a faulty colour appearance:

It has a yellow, blue or pink appearance.

On the monitor press the “Enter” button and use the “<”or “>”keys to move to the “information” menu. Press “Enter” to “Recall” the preset mode. If the image is still not correct and the OSD also has a fault colour appearance, then one of the three primary colours is missing in the signal input. Now check the VGA cable contacts. If any pins are bent or broken off, then contact your dealer or read the chapter, Additional Help, Repairs & Service.

No image can be seen:

Is the prompt on the display illuminated in green?

If the LED is illuminated in green, then press the “Exit” button on the monitor to access the On Screen Display. If the message “Not supported Mode” appears, read the chapter "Installation/Adjustment."

Is the prompt on the display illuminated in orange?

If the LED is illuminated in orange, then the power management mode is active. Press a button on the computer keyboard or move the mouse. If that does not help, then check the VGA cable contacts. If any pins are bent or broken off, then contact your dealer or read the chapter, Additional Help, Repairs & Service.

English 43

BenQ LCD Color Monitor User's Guide

Is the prompt on the display not illuminated at all?

Check the power supply mains socket, the external power supply and the mains switch.

The image is distorted, flashes or flickers:

Read the chapter, "Installation/Adjustment"and then select the correct resolution, refresh rate and make adjustments based on these instructions.

The image is displaced in one direction:

Read the chapter, "Installation/Adjustment" and then select the correct resolution, refresh rate and make adjustments based on these instructions.

Need More Help?

If your problems remain after checking this manual, please contact your place of purchase or e-mailus at: Support@BenQ.com

English 44

BenQ LCD Color Monitor User's Guide

Supported operating modes

 

Incoming display mode(Input timing)

 

Multi-scan

 

 

 

 

 

operation

 

 

 

 

 

 

Resolution

Horizontal

Vertical

Dot Clock

Remark

Actual display

 

Frequency

Frequency

Frequency

 

resolution

 

(KHz)

(Hz)

(MHz)

 

 

 

 

 

 

 

 

640x350

31.47(P)

70.08(N)

25.17

DOS

1280X943

 

 

 

 

 

 

*720x400

31.47(N)

70.08(P)

28.32

DOS

 

 

 

 

 

 

 

640x480

31.47(N)

60.00(N)

25.18

DOS

 

 

 

 

 

 

 

640x480

35.00(N)

67.00(N)

30.24

Macintosh

 

 

 

 

 

 

 

640x480

37.86(N)

72.80(N)

31.5

VESA

 

 

 

 

 

 

 

640x480

37.50(N)

75.00(N)

31.5

VESA

 

 

 

 

 

 

 

800x600

37.88(P)

60.32(P)

40.00

VESA

 

 

 

 

 

 

 

800x600

48.08(P)

72.19(P)

50.00

VESA

 

 

 

 

 

 

 

*800x600

46.86(P)

75.00(P)

49.50

VESA

1280X1024

 

 

 

 

 

832X624

49.72(N)

74.55(N)

57.29

Macintosh

full screen

 

 

 

 

 

*1024x768

48.36(N)

60.00(N)

65.00

VESA

 

 

 

 

 

 

 

1024x768

56.48(N)

70.10(N)

75.00

VESA

 

 

 

 

 

 

 

*1024x768

60.02(P)

75.00(P)

78.75

VESA

 

 

 

 

 

 

 

1024X768

60.24(N)

74.93(N)

80.00

Macintosh

 

 

 

 

 

 

 

1152x864

67.50(P)

75.00(P)

108.00

VESA

 

 

 

 

 

 

 

*1152x870

68.68(N)

75.06(N)

100.00

Macintoch

 

 

 

 

 

 

 

1152x900

61.80(N)

66.00(N)

92.94

SUN 66

 

 

 

 

 

 

 

*1152x900

71.81(N)

76.14(N)

108.00

SUN

 

 

 

 

 

 

 

1280x1024

64.00(P)

60.00(P)

108.00

VESA

 

 

 

 

 

 

 

1280x1024

75.83(N)

71.53(N)

128.00

IBM1

 

 

 

 

 

 

 

*1280x1024

80.00(P)

75.00(P)

135.00

VESA

 

 

 

 

 

 

 

*1280x1024

81.18(N)

76.16(N)

135.09

SPARC2

 

 

 

 

 

 

 

hModes, which are not listed in the above table, may not be supported. For an optimal picture it is recommended to choose a mode listed in the table.

hThere are 22 available modes that are compatible with Windows.

hImage disruption may occur as a result of signal frequency differences from VGA cards which do not correspond with the usual standard. This is not, however, an error. You may improve this situation by altering an automatic setting or by manually changing the phase setting and the pixel frequency from the "Geometry" menu.

hIf you switch off the monitor, interference lines can occur on your screen. But do not be concerned about this, as it is normal.

hTo extend the service life of the product, we recommend you use your computer's power management function.

English 45

 

 

BenQ LCD Color Monitor User's Guide

Specifications

 

 

 

 

 

Model

FP767

 

 

767Display type

17.0" ,active, TFT

Viewable diagonal

43.2 cm

Native (maximum) resolution

1,280X1,024

Colors

16.7 million

Contrast / Brightness

500:1 (Max. 600:1) / 260 cd/m² (Max. 290 cd/m²)

Response time

16 ms

Viewing angle (left/right, up/down)

70/70, 70/70 (CR=10)

 

 

80/80, 80/80 (CR=5)

 

 

Line frequency

31.47 - 83 kHzMultifrequency monitor

Image frequency

56.25 - 75.0 Hz modes within these parameters

 

 

Image checks

Digital, Screen OSD Technology,iKey

 

 

(automatic image setting)

Controls

5 buttons and iKey.

iScreen functions

Contrast, brightness, vert. & hor. image position,

 

 

phase, pixel clock, color balance, color palette, choice

 

 

of language (8 language OSD), OSD position, status

 

 

indicator

 

 

Power Management

VESA DPMS, EPA

Max. power consumption

50 Watt Max

Power saving mode

< 3 Watt

 

 

Input signal

RGB analog 0.7 Vpp/75 Ohm positive

Synchronisation

TTL separate signal connection 15-pinminiD-sub

 

 

cable

 

 

Temperature (operating)

5 °C - 40 °C

Air humidity (operating)

20% - 80%

 

 

Certifications

TCO 99 (Optional), TÜV/Ergonomics, TÜV/ GS, FCC

 

 

Class B, ISO 13406-2,VCCI, UL, CB Report, CE, C-

 

 

Tick, BSMI, Fimko, GOST

 

 

Operating voltage

Automatic switched mode power supply, 90-264V,

 

 

47-63Hz

Dimensions (W x H x D)

382.7x 404.3 x 200 mm

Weight

4.4 kg

 

 

 

English 46