Benq FP567 User Manual

Size:
3.25 Mb
Download

BenQ FP567

LCD Color Monitor

15.0" (38.1cm) LCD Panel Size

User's Manual

Copyright

Disclaimer

BenQ LCD Color Monitor User's Guide

Copyright © 2002 by BENQ Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of BENQ Corporation.

BENQ Corporation makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular purpose. Further, BENQ Corporation reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation of BENQ Corporation to notify any person of such revision or changes.

Safety

Instructions

1.The AC plug isolates this equipment from the AC supply.

2.Unplug this product from the wall outlet before cleaning. Clean the LCD monitor surface with a lint-free,non-abrasivecloth. Avoid using any cleaning solution or glass cleaner.

3.Slots and openings on the back or top of the cabinet are provided for ventilation. They must not be blocked or covered. This product should never be placed near or over a radiator or heat register, or in a built-ininstallation unless proper ventilation is provided.

4.This product should be operated from the type of power indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company.

5.Never push objects of any kind, or spill liquid of any kind into this product.

6.Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltages or other risks. If any above mentioned misuse or other accident (dropping, mis-operations)occurs, contact qualified service personnel for servicing.

7.The power supply cord serves as a power disconnect device for pluggable equipment. The socket outlet shall be installed near the equipment and shall be easily accessible.

English 1

 

 

 

BenQ LCD Color Monitor User's Guide

====

Unpacking

3

======Table

Views of the Monitor

4

========of

Front View

4

===Contents

Back View (1)

4

 

 

Back View (2): Locations of plugs & sockets ............................................................................................

5

 

Installation ...........................................................................................................

6

 

Hardware Installation ....................................................................................................................................

6

 

Software Installation ......................................................................................................................................

7

 

Adjusting the Monitor ......................................................................................

33

 

A Look at the Control Panel .....................................................................................................................

33

 

Hot Key Mode ..............................................................................................................................................

33

 

Main Menu Mode ..........................................................................................................................................

34

 

Troubleshooting ................................................................................................

39

 

Frequently Asked Questions (FAQ) ........................................................................................................

39

 

Need More Help? .........................................................................................................................................

40

 

Supported operating modes ............................................................................

41

 

Specifications .....................................................................................................

42

English 2

BenQ LCD Color Monitor User's Guide

Unpacking

Please check you have the following items. If they are missing or are damaged, please contact the dealer at which you purchased the goods.

LCD monitor with undetachable signal cable

Exit Enter

Quick Start Guide

CD-ROM

Power cord

Audio cable

Extension Base

English 3

BenQ LCD Color Monitor User's Guide

Views of the Monitor

Front View

Exit Enter

Back View (1)

English 4

BenQ LCD Color Monitor User's Guide

Back View (2): Locations of plugs & sockets

1

3

2

1. Audio cable

2. Signal cable

3. Power cord

English 5

BenQ LCD Color Monitor User's Guide

Installation

Hardware Installation

A. Make sure that the computer and monitor’s power are both turned off. Please follow the steps to install your LCD monitor.

Place the arrow on the base and the front side of the monitor in corresponding direction. The arrow on the base indicates the front of the base. Place the monitor into the base until it locks into place. There will be a clicking sound.

Exit Enter

Place the monitor face down on a soft surface. Hold the back of the monitor with one hand. Using the other hand, press the release button on the base and push outward in the direction of the arrow to detach the base extension.

B.Connect the signal cable to the VGA output of the graphics card on the computer.

C.Connect the audio cable to your computer.

D.Connect the power cord at the back of the monitor to an AC power socket. Please make sure that the socket is not blocked or covered, so you can disconnect the unit from AC supply if you need to. Your monitor is equipped with an automatic power supply for a voltage range from 100 to 240 Volt at a frequency of 50 to 60 Hz. Be sure that your local power is within the supported range. If you are unsure, ask your electricity supplier.

Signal Cable

Power Cord

Audio Cable

English 6

BenQ LCD Color Monitor User's Guide

Software Installation

A. Microsoft® Windows® 95 / 98 / 2000

If you are using Windows 95, Windows 98 or Windows 2000 as an operating system, you have to set up the correct monitor driver.

Windows 95 The first time you start Windows with a new monitor, the system will detect it and automatically install the driver for plug and play displays. To install the current driver from CD, proceed as follows:

1.Insert “BenQ LCD MonitorCD-ROMinto yourCD-ROMDriver.

2.Click “Start” then “Settings

3.Double click the “Display” icon in the Control Panel.

English 7

BenQ LCD Color Monitor User's Guide

4.From the “Display Properties” window, select the “Settings” tab. Click the “Advanced Properties” button in the bottom right corner.

5.Select the “Monitor” tab. Click the “Change” button in the top right corner.

English 8

BenQ LCD Color Monitor User's Guide

6.Now click the “Have Disk” button in the bottom right corner. When the next window appears, select the “Browse” button.

7.Insert the supplied CD into your computer. Select the CD-drivefrom thedrop-downmenu.

8.In the field above the drive selection, change to the “Drivers” folder. The current driver files are located there. Press “OK” and the window closes.

English 9