Benq FP2092 User Manual
Size:
1.44 Mb
Download

3 How to install your monitor hardware

If the computer is turned on you must turn it off before continuing.

Do not plug-inorturn-onthe power to the monitor until instructed to do so.

1. Unpack the package and place the monitor stand firmly.

2.Align the slots on the monitor against the notches on the monitor stand.

3.Place the monitor on the monitor stand and push it forward until you hear a clicking sound.

How to install your monitor hardware

9

4.Connect one end of the D-Subcable to the monitor and the other end to your computer.

5.Connect one end of the DVI-Dcable to the monitor and the other end to the signal connector of your computer. (Optional).

6.Connect one end of the USB cable into the second plug (from right to left) of the monitor and the other end to your computer.

7.Connect the power plug to your monitor.

8.Routing the cables in the Cable Bracket as shown.

9.Plug the other end of the power cord in a nearby wall socket.

10.Press the Power button on the side panel of the monitor. The power indicator will light up.

10 How to install your monitor hardware

Adjusting Your Monitor

Monitor Height

To prevent from the springing out of the monitor stand, please press the top edge of monitor stand while you press the release button to adjust the monitor at a preferred height.

Monitor Angle

How to install your monitor hardware 11

Adjusting Monitor Orientation

While making a rotation, please push the monitor to a forward tilt angle or lift up the monitor to avoid causing any damage to the monitor base.

12 How to install your monitor hardware