Belkin ErgoFit P74278 User Manual

Size:
198.55 Kb
Download

Belkin Corporation

501 West Walnut Street

Compton • CA • 90220 • USA

Tel: 310.898.1100

Fax: 310.898.1111

Belkin Components, Ltd.

Express Business Park • Shipton Way

Rushden • NN10 6GL • United Kingdom

Tel: +44 (0) 1933 35 2000

Fax: +44 (0) 1933 31 2000

Belkin Components B.V.

Starparc Building • Boeing Avenue 333

1119 PH Schiphol-Rijk• The Netherlands

Tel: +31 (0) 20 654 7300

Fax: +31 (0) 20 654 7349

Belkin, Ltd.

7 Bowen Crescent • West Gosford

NSW 2250 • Australia

Tel: +61 (0) 2 4372 8600

Fax: +61 (0) 2 4372 8603

Belkin Tech Support

US: 310.898.1100 ext. 2263 800.223.5546 ext. 2263 Europe: 00 800 223 55 460

Australia: 1800 666 040

© 2003 Belkin Corporation. All rights reserved.

All trade names are registered trademarks of respective manufacturers listed.

P74278

ErgoFitWireless

Optical Mouse

Experience advanced functionality with wireless freedom

User Manual

F8E826-OPT

TABLE OF CONTENTS

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Hardware Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Connecting the USB Mouse . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Connecting the PS/2 Mouse . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Synchronizing your Mouse to your Receiver . . . . . . . . . . . . . . . . .6 Setting your Mouse to ID Mode . . . . . . . . . . . . . . . . . . . . . . . . .6 Software Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Using the Wheel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Software Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

INTRODUCTION

Congratulations and thank you for purchasing the ErgoFit Wireless Optical Mouse from Belkin. You are about to experience a whole new world of computing convenience with superior input features and navigating accuracy. The ErgoFit works from up to six feet away without a cord, giving you unencumbered freedom of movement. It provides five customizable buttons, including the convenient scroll wheel, to make repetitive tasks simpler than ever.

Please read through this entire manual to ensure the safe, long-termuse of your ErgoFit Wireless Optical Mouse, and for help in getting the most from its advanced features.

1

OVERVIEW

Before starting the installation of the hardware and software for the ErgoFit Wireless Optical Mouse, please remove any drivers or software from any mice that were previously installed on your computer.

This is to avoid any conflicts they may create, which could result in an improper installation of your new ErgoFit Wireless Optical Mouse. Please consult the documents that came with your previous mouse for proper instructions on how to uninstall the software and drivers.

HARDWARE INSTALLATION

IMPORTANT: Before connecting your mouse or installing the software, be sure to identify the type of mouse port you are using (USB or PS/2). Refer to the diagrams below if you have difficulty determining which kind of port your mouse uses.

 

 

 

 

 

 

PS/2 Port

 

USB Port

IMPORTANT: Do not install the software until the mouse is connected to your computer. If you have not yet connected the mouse, please follow the Hardware Installation instructions.

NOTE: Your mouse is functional without installing the software. However, we recommend software installation because the software allows you to program the mouse buttons for various functions, adding personalized efficiency and enjoyment to your computing experience.

HARDWARE INSTALLATION

Connecting the USB Mouse

USB in Windows® 98, Me, 2000, and XP

1.Make sure your computer is turned on before installing the mouse.

2.Check “Add/Remove Program” in your control panel for any programs from your previous mouse. If you have anything installed for your old mouse, please un-installbefore continuing.

3.Connect the receiver to an available USB port on your computer.

4.A New Hardware Wizard will start automatically.

NOTE: In Windows Me and XP, the New Hardware Wizard will complete the installation automatically. In Windows 98 and 2000, you will need to go through theHardware-Wizardprocess, clicking the appropriate prompts as necessary. Windows 98 may also require you to insert your Windows 98 Installation CD into your computer to complete the install.

5.When your installation is complete, insert the batteries into the mouse and the mouse should sync up with the receiver automatically.

NOTE: If the mouse does not sync up with the receiver automatically, please see instructions titled “Synchronizing your Mouse to your Receiver”.

6.When your mouse is properly connected and functioning as a standard mouse, you can start the software installation for the extra button features.

4

HARDWARE INSTALLATION

Connecting the PS/2 Mouse

PS/2 in Windows 98, Me, 2000, and XP

1.Turn off your computer.

2.Connect the USB-to-PS/2connector to the mouse cable on the receiver.

3.Insert the cable with the connector to the PS/2 (6-pin)mouse port on your computer.

4.Place the batteries into the mouse.

5.Turn the computer on.

6.When the computer finishes starting up, it will automatically detect the mouse and make it functional.

NOTE: If the mouse does not work, please see instructions under “Synchronizing your Mouse to your Receiver”.

7.When your mouse is properly connected, you can start the software installation.

5

HARDWARE INSTALLATION

SOFTWARE INSTALLATION

IMPORTANT: Do not install the software until the mouse is connected to your computer. If you have not yet connected the mouse, please follow the Hardware Installation instructions.

If your mouse is not functional after following the Hardware Installation instructions, please consult the Troubleshooting section for assistance.

NOTE: Your mouse is functional without installing the software. However, we recommend software installation because the software allows you to program the mouse buttons for various functions, adding personalized efficiency and enjoyment to your computing experience.

1.Insert the CD into your computer.

2.The computer will automatically detect the CD and begin installing the software.

3.Follow the on-screeninstructions to complete the installation.

NOTE: If the computer does not automatically detect the CD, do the following:

1.Click the “Start” button and then select “Run”.

2.From the Run dialog box, enter “<drive>: Setup” and click “OK”. (<drive> being the letter of the drive that identifies your CD-Romdrive under “My Computer”. For example, if the CD

is in drive D, enter “D:\Setup”.

3.Follow the on-screeninstructions.

7