Beko WMA 667 W User Manual

Size:
624.07 Kb
Download

Automatic washing machine

WMA 647 W WMA 647 S WMA 657 W WMA 657 S WMA 667 W WMA 667 S

Please read this manual first!

Dear Customer,

We hope that your product which has been manufactured in modern facilities and passed through a strict quality control procedure will give you the best results.

Therefore, we advise you to read through this manual carefully before using your product and keep it for future reference.

This operation manual will…

…help you use your machine in a fast and safe way.

Please read the Operation Manual before installing and starting your machine.

Particularly follow the instructions related to safety.

Keep this Operating Manual within easy reach. You may need it in the future.

Please read all additional documents supplied with this machine. Please note that this Operating Manual may be applicable for several other models. Differences between models will be identified in the manual.

Explanation of symbols

Throughout this Operation Manual the following symbols are used:

C

Important information or useful hints about usage.

A

Warning for hazardous situations with regard to life and property.

B

Warning for supply voltage.

This appliance’s packaging material is recyclable. Help recycle it and protect the environment by dropping it off in the municipal receptacles provided for this purpose. Your appliance also contains a great amount of recyclable material.

It is marked with this label to indicate the used appliances that should not be mixed with other waste. This way, the appliance recycling organised by your manufacturer will be done under the best possible conditions, in compliance with European Directive 2002/96/EC on Waste Electrical and Electronic Equipment. Contact your town hall or your retailer for the used appliance collection points closest to your home. We thank you doing your part to protect the environment.

TABLE OF CONTENTS

1 Your Washing Machine

4

Program selection and consumption

 

 

 

table

19

Overview

4

Auxiliary functions

20

Specifications

5

Time screen

20

 

 

2 Warnings

6

Starting the program

21

Progress of program.

21

General Safety

6

Changing the selections after the

 

First Use

6

program has started

22

Intended use

6

Child-prooflock

22

Safety instructions

6

Cancelling the program

22

If there are children in your house...

7

Program in rinse hold mode

23

Electrical connection

7

End of program

23

3 Installation

9

6 Quick instructions for

 

 

 

daily use

24

Removing packaging reinforcement

9

Opening the transportation locks

9

 

 

 

7 Cleaning and care

26

Appropriate installation location

9

Adjusting the feet

9

 

 

 

Detergent drawer

26

Connecting to the water supply.

10

The door and the drum

26

Connecting to the drain

10

Outer cabinet and control panel

26

Electrical connection

11

Inlet water filters

26

Destroying the packaging material

11

Draining any remaining water and

 

Disposing of the old machine

11

 

cleaning the pump filter

27

4 Initial preparations for

 

8 Troubleshooting

29

washing

12

 

 

 

10 Service

35

Sorting the laundry

12

Preparing clothes for washing

12

 

 

 

 

 

 

Correct load capacity

12

 

 

 

Loading door

13

 

 

 

Detergents and softeners

13

 

 

 

5 Selecting a program and

 

 

 

 

operating your machine

15

 

 

 

 

 

 

 

 

Control panel

15

 

 

 

Display symbols

16

 

 

 

Turning the machine on

16

 

 

 

Program selection

16

 

 

 

Additional programs

17

 

 

 

Special programs

17

 

 

 

Temperature selection

18

 

 

 

Spin Speed selection

18

 

 

 

1

Your Washing Machine

 

 

Overview

Figure 1

1

3

2

5

6

4

 

 

 

 

 

 

1

Top Lid

4

Height-adjustableFeet

 

 

 

 

 

 

2

Detergent Drawer

5

Door

 

Control Panel

 

Filter Cap

3

6

4 EN

Specifications

Models

WMA 647 W

WMA647WS

WMA 657 W

WMA 657 S

WMA 667 W

WMA 667 WS

 

 

 

 

 

 

 

Maximum dry laundry capacity (kg)

6

6

6

6

6

6

 

 

 

 

 

 

 

Height (cm)

84

84

84

84

84

84

 

 

 

 

 

 

 

Width (cm)

60

60

60

60

60

60

 

 

 

 

 

 

 

Depth (cm)

54

54

54

54

54

54

 

 

 

 

 

 

 

Net Weight (kg)

72

72

72

72

72

72

 

 

 

 

 

 

 

Electricity (V/Hz.)

 

 

230 V / 50hz

 

 

 

 

 

 

 

 

 

Total Current (A)

10

10

10

10

10

10

 

 

 

 

 

 

 

Total Power (W)

2200

2200

2200

2200

2200

2200

 

 

 

 

 

 

 

Spinning cycle (rpm max.)

1400

1400

1500

1500

1600

1600

 

 

 

 

 

 

 

Specifications of this appliance may change without notice to improve the quality of the product. Figures in this manual are schematic and may not match your product exactly.

Values stated on the machine labels or in the documentation accompanying it are obtained in laboratory in accordance with the relevant standards. Depending on operational and environmental conditions of the appliance, values may vary.

5 EN

2 Warnings

Please read the following information. Otherwise, there may be the risk of personal injury or material damage.

Moreover, any warranty and reliability commitment will become void.

General Safety

Never place your machine on a carpet covered floor. Otherwise, lack of airflow from below your machine may cause electrical parts to overheat. This may cause problems with your washing machine.

If the power cable or mains plug is damaged you must call Authorized Service for repair.

Check water hoses for wear. Do not use old/used water inlet hoses. These may cause stains on your laundry.

Fit the drain hose into the waste water system securely to prevent any water leakage and to allow machine to take in and discharge water as required. It is very important that the water intake and drain hoses are not folded, squeezed, or broken when the appliance is pushed into place after it is installed or cleaned.

Your washing machine is designed not to continue operating in the event of a power interruption. You cannot cancel any program by pressing the “On/Off button.” Your machine will not resume its program when the power restores. Press the “Start/Pause/Cancel” button for

3 seconds to cancel the program

(See, Cancelling a Program)

There may be some water in your machine when you receive it. This is from the quality control process and is normal. It is not harmful to your machine.

Some problems you may encounter may be caused by the software.

Press “Start/Pause/Cancel” button

for 3 seconds to cancel the program set in your machine before calling the authorized service.

First Use

To prepare your machine for washing, carry out your first washing process without loading your machine and with detergent under

“Cottons 90°C” program.

Ensure that the cold water connections has been made correctly when installing your machine.

If the current fuse or circuit breaker is less than 15 Amperes, please have a qualified electrician install a 15 Ampere fuse or circuit breaker.

To make your machine ready for use, please be sure that the tap water supply and water drainage systems are appropriate before calling the authorized service. If they are not, call a qualified plumber to have any necessary arrangements carried out.

Intended use

This product has been designed for home use.

The appliance may only be used for washing and rinsing of textiles that are marked accordingly.

Only detergents, softeners and supplements suitable for washing machines may be used.

Observe the care instructions labelled on textile products and any other instructions given by companies that produce detergents for your machine.

Safety instructions

This appliance must be connected to an earthed outlet protected by a fuse of suitable capacity.

The supply and draining hoses must always be securely fastened and

6 EN

remain in an undamaged state.

Fit the draining hose to a washbasin or waste system securely before starting up your machine. There may be a risk of being scalded due to high washing temperatures!

Never open the door or remove the filter while there is still water in the drum. Otherwise, there may be the risk of flooding and possible injury due to the hot water.

Never force open the locked door!

The door will be ready to open just a few minutes after the washing cycle comes to an end.

Unplug the machine when it is not in use.

Never wash down the appliance with a water hose! There is the risk of electric shock! Always disconnect from the mains by unplugging before cleaning.

Never touch the plug with wet hands. Never unplug by pulling on the cable, always pull out from the plug only. Do not operate the

machine if the power cord or plug is damaged.

Never attempt to repair the machine yourself. Otherwise, you may be putting yours and other’s lives in danger.

For malfunctions that cannot be solved by information in the operating manual:

Turn off the machine, unplug it, turn off the water tap and contact an authorized service agent.

If there are children in your

house...

Electrical appliances may be dangerous for the children. Keep children away from the machine when it is operating. Do not let them tamper with the machine.

Electrical connection

Make sure that you have an earthed power outlet socket rated at 13 amps

(minimum).

Attention!

If you use your machine as built-in,the socket must be reachable after

installation, or a separate switch (which can disconnect the two poles) must be used in the installation.

Connect the power cord to the appropriate electrical socket with an equivalent current rating indicated on the rating plate at the front of the machine behind the kick plate.

After removing the plug from its transit position, please insert the plug seal to prevent water spillage entering the machine.

Electrical requirements

Before you insert the plug into the wall socket make sure that the voltage and the frequency shown in the rating label corresponds to your electricity supply. We recommend that this appliance be connected to the mains supply via a suitable switched and fused socket in a readily accessible position.

Should the mains lead of the appliance become damaged or need replacing at any time, it must be replaced by a

special purpose made mains lead which can only be obtained from a Authorised Service Agent.

B This appliance must be earthed

If the fitted moulded plug is not suitable for your socket, then the plug should be cut off and an appropriate plug fitted.

Destroy the old plug, which is cut off as a plug with a bared cord could cause a shock hazard if inserted into a socket elsewhere in the house.

The moulded plug on this appliance

Close the door when you leave the incorporates a 13A fuse. Should the fuse

area where the machine is located.

Store all detergents in a safe place out of reach of the children.

need to be replaced an ASTA approved BS1362 fuse of the same rating must be used. Do not forget to refit the fuse cover. In the event of losing the fuse

7 EN

cover, the plug must not be used until a replacement fuse cover has been fitted. Colour of the replacement fuse cover must be the same colour as that visible on the pin face of the plug. Fuse covers are available from any good electrical store.

Important

Fitting a different plug

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals on your plug, proceed as follows:

1Connect the green - yellow or green

(earth) wire to the terminal in the plug marked ‘E’ or with the symbol f or coloured green and yellow or green.

2Connect the blue (neutral) wire to the terminal in the plug marked ‘N’ or coloured black.

3Connect the brown (live) wire to the terminal in the plug marked ‘L’ or coloured red.

With the alternative plugs a 13A fuse must be fitted either in the plug or adaptor or in the main fuse box. If in doubt contact a qualified electrician.

8 EN

3 Installation

Removing packaging reinforcement

Tilt the machine to remove the packaging reinforcement. Remove the packaging reinforcement by pulling the ribbon.

Opening the transportation locks

CTransportation safety bolts must be removed before operating the washing machine! Otherwise, the machine will be damaged!

1.Loosen all the bolts with a spanner until they rotate freely (“C”)

2.Remove transportation safety bolts by turning them gently.

3.Fit the covers (supplied in the bag with the Operation Manual) into the holes on the rear panel. (“P”)

CKeep the transportation safety bolts in a safe place to reuse when the washing machine needs to be moved again in the future.

CNever move the appliance without the transportation safety bolts properly fixed in place!

Appropriate installation location

Install the appliance in environments which have no risk of freezing, in a stable and level position.

CThe floor must be capable of carrying the load on it!

CIf the washing machine and a drier are placed on top of each other, their approximate weight together may reach 180 kg when they are full.

Important:

Do not place the appliance on top of the power cable.

Keep at least 1cm distance from the edges of other furniture.

Place the machine on a firm surface; do not position it on a long pile rug or such like surfaces.

Adjusting the feet

CDo not use any tools to loosen the lock nuts. Otherwise, they can be damaged.

1.Manually (by hand) loosen the lock nuts on the feet.

9 EN

2.Adjust them until the machine stands level and firm.

3.Important: Tighten all lock nuts up again.

Connecting to the water supply.

Important:

The water supply pressure required to run the machine must be 1-10bar (0,1 – 1 MPa). (Practically, it is necessary to have 10 – 80 liters of water flowing from the tap in one minute to have your machine run smoothly.) Attach a pressurereducing valve if the water pressure is higher.

Connect the special hose supplied with the machine to the water intake valves on the machine.

In order to prevent water leakage that may occur at the connection points, there are rubber seals (4 seals for the models with double water inlet and 2 seals for other models) attached to the hoses.

These seals should be used at the tap and machine connection ends of the hoses. The plain end of the hose fitted with a filter must be attached to the tap and the elbowed end

must be attached to the machine. Tighten the nuts of the hose well by hand; never use wrenches to tighten the nuts.

Open the taps completely after making the hose connection to check if there is any water leakage at the connection points. Turn off the tap and remove the nut in case of any leakage. Retighten the nut carefully after checking the seal. To prevent any water leakage and any other damage to be caused by it, keep the taps closed when the machine is not in use.

Models with a single water inlet should not be connected to the hot water tap. Laundry may be damaged or the appliance may switch to protection mode and not work.

When returning the appliance to its place after maintenance or cleaning, care should be taken not to fold, squeeze or block the hoses.

Connecting to the drain

The water discharge hose can be attached to the edge of a washbasin or waste water system. The drain hose should be firmly fitted into the drain as to not loosen in its housing.

Important:

The end of the drain hose can be directly connected to the wastewater drain or to the washbasin. The fitting must be

secured in all types of connections.

10 EN

Your house may be flooded if the hose falls out of its housing during water discharging.

The hose should be attached to a height of at least 40 cm, and 100 cm at most.

In case the hose is elevated after laying it on the floor level or close to the ground (less than 40 cm above the ground), water discharge becomes more difficult

and the laundry may come out wet. Therefore, the heights described in the figure should be followed.

To prevent dirty water refilling the machine, and to allow for easy discharge, the end of the hose must not be submerged in the drain water. The end of the hose must be able to take in air. The hose should be pushed into the drainage for more than 15 cm. If it is too long you may have it shortened.

The end of the hose should not be bent, it should not be stepped on and it must not be folded between the drain and the machine.

The length of the hose is too short, you may add an extension hose to the original section. The length of the hose must not be longer than 3.2 m after coming out of the machine. To avoid water leakage

failures, the connection between the extension hose and the drain hose of the product must be fitted well with an appropriate clamp as not to come off and leak.

Electrical connection

Connect the machine to an earthed outlet protected by a fuse of suitable capacity.

Important:

Connection should comply with national regulations.

Power cord plug must be within easy reach after installation.

The voltage and the allowed fuse protection are specified in the section “Technical Specifications”.

The specified voltage must be equal to your mains voltage.

Connection via extension cords or multi-plugsshould not be made.

BA damaged power cable must be replaced by a qualified electrician.

BThe appliance must not be operated whilst faulty until it as been repaired! There is the risk of electric shock!

Destroying the packaging material

Packaging material can be dangerous to children. Keep the packaging materials out of reach of children or dispose them by classifying according to waste directives. Do not dispose of them together with normal domestic waste.

Packaging materials of your machine are manufactured from recyclable materials.

Disposing of the old machine

Dispose of your old appliance in an environmental friendly manner.

You may refer to your local agent or solid waste collection center in your municipality to learn how to dispose of your machine.

Before disposing of your old washing machine, cut off the mains plug and make the door lock unusable.

11 EN

4 Initial preparations for washing

Sorting the laundry

Sort the laundry according to type of fabric, color, and degree of soiling and permissible water temperature. Always follow the advice on the garment labels.

Washing water

Wash with

Non machine-

Do not wash

temperature

sensitive, short

washable

 

 

programs.

 

 

Bleach can be

Do not use

Dry-cleanable

Do not

used

bleach

 

dry-clean

Suitable for

Do not dry

Dry

Dry on a

drier

with drier

horizontally

hanger

Hang without

Can be ironed

Can be

Do not iron

spinning

with hot iron

ironed with

 

 

 

warm iron

 

Preparing clothes for washing

Laundry items with metal attachments such as, bras, belt buckles and metal buttons will damage the machine.

Remove metal attachments or place the items in a clothing bag, pillow case, or something similar.

Empty pockets and remove all foreign objects such as coins, pens and paper clips. If possible, turn pockets out and brush.

Place small items like infants’ socks and nylon stockings, etc. in a laundry bag, pillow case or

something similar. This will also save your laundry from getting lost.

Place curtains in the machine with care. Remove curtain rails and pullers.

Fasten zippers, sew loose buttons and mend rips and tears.

Wash “machine washable” or “hand washable” labelled products only with an appropriate program.

Do not wash colours and whites together. New, dark coloured cottons may release a lot of dye. Wash them separately.

Tough stains must be treated properly before washing. If you are not sure, check with a dry cleaner.

Use only dyes/colour changers and lime removers suitable for machine wash. Always follow the instructions on the packaging.

Wash trousers and delicate clothes turned inside out.

Keep laundry items made of Angora wool in the freezer for a few hours before washing. This will reduce pilling.

Correct load capacity

The maximum load capacity depends on the type of laundry, the degree of soiling and the washing program you wish to use.

CThe machine adjusts the amount of water according to the amount of laundry placed inside.

CPlease follow the information in the "Program Selection Table". Washing results will degrade when the machine is overloaded.

12 EN

Following weights are given as examples.

Laundry type

Weight (gr.)

Bathrobe

1200

Napkin

100

Duvet cover

700

Bed Sheet

500

Pillowcase

200

Tablecloth

250

Towel

200

Evening gown

200

Underclothing

100

Men’s coveralls

600

Men’s shirt

200

Men’s pajamas

500

Blouse

100

Loading door

The door is locked during program operation. The door can be opened after some time following the program end.

Open the door.

Place laundry items loosely in the machine.

Push the door until it clicks into place tightly. Ensure that no items are caught in the door.

Detergents and softeners

Detergent drawer

The detergent drawer is composed of three compartments:

The detergent dispenser may be in two different types according to the model of your machine.

-(I) for prewash

-(II) for main wash

-(III) siphon

– () for softener

Detergent, softener and other cleaning agents

Add detergent and softener before starting the washing program. Never open the detergent dispenser drawer while the washing program is running!

When using a program without prewash, no detergent should be put into the pre-washcompartment

(Compartment no. I).

A program without pre-washshould not be selected if a detergent bag or a dispensing ball is going to be used.

You can place the detergent bag or the dispensing ball directly among the laundry in your machine.

Choosing the detergent type

The type of detergent to be used depends on the type and colour of fabric.

Use different detergents for coloured and white clothes.

Wash woolens with a special detergent specifically for woolens.

Use only detergents manufactured specifically for washing machines.

Detergent quantity

The amount of washing detergent to be used depends on the amount of laundry, the degree of soiling and water hardness.

Do not use amounts exceeding the quantities recommended on the package to avoid problems of excessive foam, poor rinsing, financial savings and finally, environmental protection.

Use small amounts of detergent at a suitable measure for small amounts of laundry or for only slightly soiled laundry.

Use exact measures for highly concentrated detergents.

13 EN

 

Detergent

 

quantity

for prewashing

1/2 measure

for main

1 measure

washing

 

with hard water

an additional

1/2 measure

 

Softener

Put the softener into the softener compartment of the detergent dispenser.

Use the proportions recommended on the packet.

Never exceed the (> max <) level marking; otherwise, the softener will be wasted without being used.

If the softener has lost its fluidity, dilute dense softener with water before placing it in the detergent drawer.

Liquid detergent

When using liquid or gel washing detergents, please note the following:

The liquid detergent may leave stains on your laundry if time delay feature is selected.

Do not use liquid detergent if you want to wash using the time delay feature.

Do not use liquid detergent for the main wash in a cycle with pre-wash.

Use the detergent manufacturer's measuring cup and follow the instructions on the package.

Starch

Add liquid starch, powder starch or the dyestuff into the softener compartment as instructed on the package.

Never use fabric softener and starch together in the same washing cycle.

Wipe the inside of the drum after using starch.

Eliminating lime formation

When required, use only appropriate lime removers developed specifically for washing machines and always

follow the instructions on the package.

14 EN

5 Selecting a program and operating your machine

Control panel

Figure 2

7

 

13

 

 

 

 

 

 

 

9

14

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8

11a 11b 11c 11d

10

12

7 – Spin Speed Adjustment Button

8 - Time Delaying Button (+/-)

9 - Temperature Adjustment Button

10 - Start/Pause/Cancel Button

11 - Auxiliary Function Buttons

a- Prewash

b- Quick Wash

c- Rinse Plus

d- Anti-creasing

12 - Program Selection Knob

13 - Display

14 - On / Off Button

15 EN

Display symbols

Figure 3

13.a - Spin Speed Indicator

13.b – Temperature Indicator

13.c – Spinning Symbol

13.d – Temperature Symbol

13.e – Remaining Time and Delaying

Time Indicator

13.f – Program Indicator Symbols (prewashing/main washing/rinsing/ softener/spinning)

13.g – Economy Symbol

13.h – Time Delaying Symbol

13.i – Door Locked Symbol

13.j – Start Symbol

13.k – Standby Symbol

13.l – Auxiliary Function Symbols

Turning the machine on

Plug in your machine. Turn the tap on completely. Check if the hoses are connected tightly. Place the laundry in the machine. Put in detergent and softener. Press the “On/Off” button (Figure 2-14).

Program selection

Select the appropriate program from the program table according to type, amount and soiling degree of the laundry and washing temperatures.

Bring the Programme Selection Knob (Figure 2-12)to the program mode that you wish to wash your laundry at.

The recommended temperature and spin speed for the selected program

16

appear. Press “Start/Pause/Cancel” button (Figure 2-10)to start the program.

Main programs

Depending on the type of textile, the following main programs are available:

•Cottons

You can wash your durable clothes at this program. Your laundry shall be washed with intense washing movements during a longer washing cycle. It is recommended for your cotton clothes (such as bed sheets, duvet and pillowcase sets, bathrobes, underclothing, etc.).

C “Super 40” programme may be selected instead of “Cotton 60*” programme during winter in areas where the input water temperatures low and/or in areas with low supply voltage.

The auxiliary functions in the table may differ according to the model of your machine.

•Intensive

You can wash your durable and heavily soiled clothes at this program. In this program, your clothes will be washed for a longer time and an extra rinsing will be made compared to “Cottons” program. You can use it for your heavily soiled clothes that you wish to be rinsed sensitively.

•Mini

This program is used to quickly wash a small number of lightly soiled cotton garments.

•Hand wash

You can wash your woolen/delicate clothes that bear “not machinewashable” labels for which hand wash

EN

is recommended at this program. It washes the laundry with very tender washing movements without wearing your clothes out.

•Woollens

You can wash your machine-washablewoollen garments at this program. Wash by selecting the proper temperature according to the labels of your clothes. It is recommended to use appropriate detergents for woolens.

•Delicates

You can wash your delicate clothes at this program. It has more sensitive washing movements and does not make intermediate spinning compared

to “Synthetic” program. It must be used for clothes for which sensitive washing is recommended.

•Synthetics

You can wash your less durable clothes at this program. Lighter washing movements and shorter washing

cycle is used compared to “Cottons” program. It is recommended for your synthetic clothes (such as shirts, blouses, synthetic/cotton blended garments, etc.). For curtains and veils, it is recommended to use “Synthetic 40˚C” program with prewash and anti-creasingfunctions selected. Detergent should not be put in the prewash compartment. Less detergent should be put in the main wash compartment as the veil foams too much because of its meshed structure.

Additional programs

For special cases, there are also extra programs available:

•Baby & Toddler Clothing

Increased hygiene is provided by a longer heating period and an additional rinse cycle. It is recommended for baby clothes and clothes worn by allergic people.

•A Class 40

This program washes for a longer period at 40°C and gives the same result as the “Cottons 60°C” program, thus it saves energy. It is suitable for clothes for

which you cannot use the “Cotton 60°C” program.

Each of these main programs comprise of a complete washing process, including washing, rinsing and, if required, spin cycles.

CSort the laundry according to type of fabric, color, degree of soiling and permissible water temperature while choosing a program.

CAlways select the lowest required temperature. Higher temperature means higher power consumption.

CFor further program details, see

“Program Selection Table”

Economy symbol

Shows energy saving programs and temperature selections.

As “Intensive” and “Baby & Toddler Clothing” programs are long programs with higher temperature selections to ensure hygiene, “Economy” Symbol (Figure 3-13g)will not light up.

e

Special programs

For specific applications, you can select any of the following programs:

• Rinse

This program is used when you want to rinse or starch separately.

• Spin

This program spins with maximum possible rpm in the default setting.

CYou should use a lower spin rpm for delicate laundries.

• Pump

This program is used to discharge the water of the clothes soaked into water in the machine.

Temperature selection

Whenever a new program is selected, the temperature anticipated for that

17 EN

program appears on the temperature indicator (13b).

To change the temperature, press the temperature button (Figure 2-9).

Temperature falls with 10° decrements.

Cold selection is shown with “-”symbol.

When the “Temperature” button is pressed after coming to the Cold selection, the maximum temperature of the program you have selected will be displayed.

To decrease the temperature, press the

“Temperature” button again.

 

Normally soiled, white

 

cottons and linens. (Ex.:

90˚C

coffee table covers,

 

tablecloths, towels, bed

 

sheets)

 

Normally soiled, fade proof

 

colored linens, cottons

 

or synthetic clothes

60˚C

(Ex.: shirts, nightgowns,

 

pajamas) and lightly soiled

 

white linen clothes (Ex.:

 

underwear)

40˚C-

For delicate clothes (Ex.: veil

curtains), blended clothes

30°C-

including synthetics and

Cold

woolens.

 

Spin Speed selection

Whenever a new program is selected, the maximum spin speed of the selected program is displayed on the spin speed indicator (Figure 3-13a).

To decrease the spin speed, press the “Spin” button (Figure 2-7).Spin

speed decreases gradually. Then, rinse hold and no spin options are shown respectively.

Rinse hold is shown with “” and no spin is shown with “ ” symbols.

e

If you do not want to unload your clothes immediately after the program, you may use the rinse hold function in order to prevent your clothes become wrinkled in an anhydrous condition. With this function, your laundry is kept in the final rinsing water. If you want to spin your laundry after the rinse hold function:

-Adjust the spin speed.

-Press Start/Pause/Cancel Button. Program resumes. Your machines drains the water and spins your laundry.

You can use no spin function in order to drain the water without spinning at the end of the program.

18 EN

Program selection and consumption table

 

 

 

 

 

Programme

 

 

 

Auxiliary functions

 

 

Temperature

 

 

 

 

 

 

Duration (~min)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Programme

(kg)LoadMax.

rpm1400-6001500rpm spinclassB(For efficiency)

rpm1600-15001400rpm spinclassA(For efficiency)

ConsumptionWater (l)

ConsumptionEnergy (kWh)

(rpm)speedSpin

Prewash

WashQuick

PlusRinserinseExtra

Creasing-Anti

HoldRinse

90

80

70

60

50

40

30

Cold

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Cottons

90

6

156

165

55

2.30

max.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Cottons

60**

6

144

153

495

1,14

max.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Cottons

40

6

134

143

45

0.65

max.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SuperA Class 40

40

6

162

171

72

1.07

max.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Intensive

60

6

199

208

97

1.75

max.

 

 

*

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

90

6

142

151

94

2.44

max.

 

 

*

 

 

 

 

Baby&Toddlercare

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Synthetics

60

3

135

135

56

1.00

800

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Synthetics

40

3

93

93

56

0.65

800

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Delicate

40

2

75

75

46

0.27

600

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Woollens

40

1.5

70

70

42

0.43

600

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Hand wash

30

1

52

52

35

0.15

600

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Mini

30

2.5

30

30

39

0.21

max.

 

 

 

 

 

 

 

 

 

 

 

 

 

***

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Selectable

*Automatically selected, not cancellable.

**Energy Label programme (EN 60456)

***Spin speed of Mini 30 program in washing machines with spin speeds more than

1400rpm is maximum 1400 rpm.

Water and power consumption and programme duration may differ from the table shown, subject to changes in water pressure, water hardness and temperature, ambient temperature, type and amount of laundry, selection of auxiliary functions, and fluctuations in the supply voltage.

CThe auxiliary functions in the table may differ according to the model of your machine.

19 EN

Auxiliary functions

Auxiliary function selection keys

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

11a

11b

11c

11d

 

 

 

 

 

 

 

Depending on the program, you can select the desired auxiliary function by pressing the keys 11a, 11b, 11c, 11d.

Select the required auxiliary functions before starting the program.

Some combinations cannot be selected together. (Ex.: Prewash (Figure 2-11a)and Quick Wash (Figure2-11b).

Symbol of the selected auxiliary function (Figure 3-13l)will light up.

Auxiliary function selection

If an auxiliary function that should not be selected together with a previously selected function is chosen, the first selected function will be cancelled and the last auxiliary function selection will remain active.

(Ex.: If you want to select prewash first and then quick wash, prewash will be cancelled and quick wash will remain active.

Auxiliary function that is not compatible with the program cannot be selected.

(see, “Program Selection Table”)

Prewash

When you select this function (11a), the display will indicate “F1” symbol.

A prewash is only required with heavily soiled laundry. Without prewash you save energy, water, detergent and time.

Prewash without detergent is recommended for veils and curtains.

Quick wash

With this program (11b), the wash time is shortened. “F2” symbol will light up on the display.

Use this function for smaller amounts or slightly soiled laundries.

Extra rinse

This function (11c) allows your machine to perform an extra rinsing in addition to the rinsing cycles performed by your machine after main washing cycle.

Thus, the risk for sensitive skins (babies, allergic skins and etc.) to be effected by the minimal detergent remnants on the laundry is reduced. “F3” symbol will light up on the display.

Anti-creasing

With this function (11d), drum rotation will be lessened to prevent creasing and spinning speed is limited. In addition, washing is carried out at a higher water level. “F4” symbol will light up on the display.

Use this function for delicate laundries that crease easily.

CWhenever you select this auxiliary function, load your machine with half of the maximum laundry amount specified in the program table.

Time screen

The display shows the time remaining for the program to complete while a program is running. Time is displayed in hours and minutes as “01:30”.

Program duration may differ from the values in the consumption table subject to the changes in the water pressure, water hardness and temperature, ambient temperature, type and amount of laundry, auxiliary functions selected, and changes in the supply voltage.

20 EN

Time delay

With the “Time delay” function you can delay the program start up to 24 hours. Setting can be made in intervals of 30 minutes.

1.Open the loading door, place the laundry inside and fill with detergent.

2.Set the washing program, temperature, spin speed and, if required, select the auxiliary functions.

3.Press “Time delaying” buttons “+” and “-”(Figure2-8)to set your desired time delay. Time delaying symbol (Figure3-13h)will flash.

4.Press “Start/Pause/Cancel” button (Figure 2-10).Then the time delay starts to count down. Time delaying symbol (Figure3-13h)will light up. Start symbol (Figure3-13j)will light up.

The “:” in the middle of the displayed time delay will start flashing.

More laundry may be loaded or taken out during the time delay period. At the end of the time delay countdown process, time delaying symbol (Figure 3-13h)fades and the washing starts as the program duration is displayed.

Changing the delay time

If you want to change the time during the countdown:

1.Press “Start/Pause/Cancel” button (Figure 2-10).“:” in the middle of the screen will stop flashing. Standby symbol (Figure3-13k)will light up. Time delaying symbol (Figure3-13h)will flash. Start Symbol (Figure3-13j)will fade.

2.Press “Time delaying” buttons “+” and “-”(Figure2-8)to set your desired time delay.

3.Press “Start/Pause/Cancel” button (Figure 2-10).Time delaying symbol (Figure3-13h)will light up. Standby symbol (Figure3-13k)will fade. Start symbol (Figure3-13j)will light up.

4.The “:” in the middle of the displayed

time delay will start flashing.

Cancelling the time delay

If you want to cancel the time delay countdown and start the program immediately:

1.Press “Start/Pause/Cancel” button (Figure 2-10).The “:” in the middle of the displayed time delay will stop flashing.

2.Start symbol (Figure 3-13j)will fade. The standby symbol (Figure3-13k)and the time delaying symbol (Figure3-13h)will flash.

3.Press time delaying button “-”(Figure2-8)to decrease the desired time delay. Program duration after

30 minutes shall be displayed.

4.Press “Start/Pause/Cancel Button” (Figure 2-10)to start the program.

Starting the program

1.Press “Start/Pause/Cancel” button (Figure 2-10)to start the program.

2.The start symbol (Figure 3-13j)which indicates that the program has started will light up.

3.The door locks and the door locked symbol (Figure 3-13i)will light up.

4.Symbol of the relevant step

(prewash, main wash, rinse, softener and spin) that the program has started from will light up (Figure 3-13f).

Progress of program.

The progress of a running program is shown through a number of symbols on the screen.

At the beginning of each program step, the relevant symbol in the series of symbols will light up and thus, at the end of the program, all symbols will remain lit up. The

symbol that is lit up at the far right of the series of symbols indicates the step that is being carried out.

Prewash

When “Prewash” auxiliary function is selected, prewash symbol will light up to

21 EN

indicate the beginning of prewash step.

Main wash

Main wash symbol will light up to indicate that the main wash cycle has started.

Rinse

Rinse symbol lights up at the beginning of the rinse step.

Softener

Softener symbol lights up at the beginning of softener step.

Spin

Spin symbol will light up at the beginning of the final spin, during “Spin” and “Pump” special programs.

If the machine is not spinning, the program may be in rinse hold mode or the automatic spin correction system has been activated because of the excessive unbalanced distribution of the laundry in the machine.

Changing the selections after the program has started

The selected spin speed and program temperature fade out. An empty frame appears.

When the “Program selection” button is brought to the appropriate position, rpm and temperature data reappear.

Switching the machine to standby mode

Machine is switched to standby mode by pressing “Start/Pause/Cancel” button (Figure 2-10)for a short time. Standby symbol (Figure3-13k)which indicates that the machine is in standby mode lights up and the start symbol (Figure3-13j)that shows the program has started and is still continuing fades out.

Selecting or cancelling an auxiliary function in standby mode

Auxiliary functions can be cancelled or selected in accordance with the step the program is at.

Adding/taking out laundry in standby mode

The door can be opened if the water level is suitable. The door locked symbol

(Figure 3-13i)will light up until the door is suitable for opening. This symbol will fade out as soon as the door is allowed to open. Laundry may be added / taken out by opening the door.

Door lock

Door Locked Symbol (Figure 3-13i)lights up when the loading door is locked. This symbol will flash until the door is allowed to open. Do not force the door at this stage. This symbol will fade out as soon as the door is allowed to open. You may open the door after the symbol fades out.

Child-prooflock

You can protect the appliance from being tampered by children by means of the child-prooflock. In this case, no change can be made in the running program.

2. The machine is switched to child-lockby pressing the 2nd and 4th auxiliary functions for 3 sec. “C:on” (Child lock is activated) label appears on the screen.

The same symbol will also be displayed on the screen whenever any button

is pressed while the machine is childlocked.

To deactivate the child-prooflock, press the 2nd and 4th auxiliary function buttons for 3 sec.

“C:OFF” (Child lock is deactivated) label appears on the screen.

Cancelling the program

“Start/Pause/Cancel” button (Figure 2-10)is pressed for 3 seconds to cancel the program. Start symbol (Figure3-13j)will flash during cancellation.

After cancellation, the symbol of the corresponding step at which the cancellation was made will remain lit and

“End” label will appear on the screen.

22 EN

Program in rinse hold mode

This process is shown with the flashing Spin Symbol (Figure 3-13c)and the lit up Standby Symbol

(Figure 3-13k).

If you wish to spin when the machine is in this mode:

Adjust the spin speed. Press “Start/ Pause/Cancel” button (Figure 2-10).

The program continues, pumps out the water and spins. Standby Symbol

(Figure 3-13k)fades out and Start Symbol (Figure3-13j)lights up.

If you want to discharge the water only without spinning:

Press “Start/Pause/Cancel” button (Figure 2-10).Standby symbol (Figure3-13k)will fade. Start symbol (Figure3-13j)will light up. The program continues and only pumps out the water.

End of program

When the program is finished, the symbols of the relevant steps will remain lit up and the auxiliary function, spin and temperature data selected at the startup of the program will remain selected.

“End” label will appear on the screen.

23 EN

6 Quick instructions for daily use

Preparation

1.Turn the tap on completely. Check if the hoses are connected tightly.

2.Place the laundry in the machine.

3.Add detergent and softener.

Starting

1.Press the “On/Off” button (Figure 2-14).

2.Select the program and the temperature.

3.If desired (according to your machine’s model):

select any auxiliary function,

adjust the spin speed,

set the time delay,

4.Close the loading door.

5.Press “Start/Pause/Cancel” button (Figure 2-10).

The display shows the time remaining for the program to complete if time delay is not set.

The display shows the time remaining for the program to start if the time delay is set.

6.Check if the Door Locked Symbol

(Figure 3-13i)lights up on the screen.

The Door Locked Symbol (Figure 3-13i)will light up if time delay is not set.

The Door Locked Symbol (Figure 3-13i)will fade if time delay is set.

Cancelling a program

1.Press and hold the “Start/Pause/ Cancel” button (Figure 2-10)for about 3 seconds; the Start symbol (Figure3-13j)will start flashing.

2.The machine can discharge all the water or can take in water for

3 times at most to cool down the clothes and complete discharging process.

Adding more laundry

This is only possible under the following conditions:

during time delay,

CYou may add or remove laundry during the time delay (until the program starts). At the beginning of a washing cycle (machine allows

adding more laundry during a future step only if the water level is low enough to open the loading door or if the temperature in the machine is low).

In order to add laundry after the start-upof the program:

1.Press “Start/Pause/Cancel” button (Figure 2-10).

2.Open the loading door and put in more laundry.

3.Close the loading door.

4.Press “Start/Pause/Cancel” button (Figure 2-10).

Program is in rinse hold mode

CThis process is shown with the flashing spin symbol (Figure 3-13c)and the standby symbol (Figure3-13k)which is lit up.

If you wish to spin when the machine is in this mode:

1.Adjust the spin speed.

2.Press “Start/Pause/Cancel” button (Figure 2-10).The program

continues, pumps out the water and spins.

3.The standby symbol (Figure 3-13k)

fades out and the start symbol

(Figure 3-13j)lights up.

If you want to discharge the water without spinning:

1.Press “Start/Pause/Cancel” button (Figure 2-10).

2.The standby symbol (Figure 3-13k)fades out and the start symbol

(Figure 3-13j)lights up.

3.The program continues and only pumps out the water.

Re-spinningthe laundry

The control system for an unbalanced load can pause the spinning in cases when the distribution of the laundry in the drum is not balanced.

If you want to re-spinthe clothes:

1.Distribute the laundry in your machine for a balanced load.

2.Select the spin program.

3.Adjust the spin speed.

24 EN

After the program is finished

Program indicator symbols (Figure 3-13f)on the screen will remain lit after the program is finished. “End” will appear on the screen.

1.Open the loading door and take out the laundry when the door locked symbol on the display (Figure 3-13i)fades out.

2.Press the “On/Off” button (Figure 2-14).

3.Turn the water tap off.

4.Remove any folds in the rubber seal on the loading door and check for debris.

5.Leave the loading door and detergent drawer open to dry.

25 EN

7 Cleaning and care

Detergent drawer

Remove any powder residue buildup in the drawer. To do this;

1.Press the dotted point on the siphon in the softener compartment and pull towards you until the compartment is removed from the machine.

CIf more than a normal amount of water and softener mixture starts to gather in the softener compartment, the siphon must be cleaned.

2.Wash the dispenser drawer and the siphon with plenty of lukewarm water in a washbasin.

Wear protective gloves or use an appropriate brush to avoid touching the residues in the drawer when cleaning.

3.Replace the drawer into its housing after cleaning. Check if the siphon is in its original location.

The door and the drum

After each wash:

Check if there are any foreign substances in the drum.

Open the hole in the bellow with the aid of a toothpick if it is clogged.

CForeign metal substances in your machine can cause rust stains. In such cases:

Clean the drum with a stainless steel cleaning agent. Never use steel wool or wire wool.

Outer cabinet and control panel

When necessary:

Wipe the exterior panels of your machine with soapy water or mild detergent. Dry it with a soft cloth.

Use only a soft and damp cloth to clean the control panel.

CNever use a sponge or scrubbing material. These will damage the painted and plastic parts.

Inlet water filters

There is a filter at the end of each water intake valve at the back side of the machine and also at the end of each water intake hose where they are connected to the tap. These filters prevent the foreign substances and dirt in the water to enter into the machine. Filters should be cleaned as they get dirty.

Close the taps.

Remove the nuts of the water intake hoses to clean the surfaces of the filters on the water intake valves with an appropriate brush.

26 EN

If the filters are very dirty, you can pull them out by means of pliers and clean them.

Take out the filters on the flat ends of the water intake hoses together with the gaskets and clean thoroughly under streaming water.

Replace the gaskets and filters carefully and tighten the hose nuts by hand.

Draining any remaining water and cleaning the pump filter

Filter system in your machine prevents solid items such as buttons, coins and fabric fibers clogging the pump propeller during discharging of the washing water.

If your machine fails to drain the water, the pump filter may be clogged. You may have to clean it every 2 years or whenever it is blocked plugged. Water must be drained off to clean the pump filter.

In addition, water may have to be drained off completely in the following cases:

before transporting the machine (e.g. when moving house)

when there is the danger of frost

In order to clean the dirty filter and discharge the water;

1- Disconnect or unplug the machine from the power supply.

A There may be water at 90°C in the machine. Therefore, the filter must be cleaned only after the inside water is cooled down to avoid hazard of scalding.

2- Open the filter cap. The filter cap may be composed of one or two pieces according to the model of your machine. If it is composed of two pieces, press the tab on the filter cap downwards and pull the piece out towards yourself.

If it is composed of one piece, hold it from both sides and open it by pulling out.

3- An emergency drain hose is supplied with some of our models. Others are not supplied with this item.

If your product is supplied with an emergency drain hose, do the following as shown in the figure below:

Pull out the pump outlet hose from its housing.

Place a large container at the end of the hose. Drain the water off into the container by pulling out the plug at the end of the hose. If the amount of water to be drained off is greater than the volume of the container, replace the plug, pour the water out, then resume the draining process.

After draining process is completed, replace the plug into the end of the hose and fit the hose back into its place.

27 EN

If your product is not supplied with an emergency drain hose, do the following as shown in the figure below:

Place a large container in front of the filter to receive water flowing from the filter.

Loosen pump filter (anticlockwise) until water starts to flow out of it. Direct the flowing water into the container you have placed in front of the filter. You can use a piece of cloth to absorb any spilled water.

When there is no water left, turn the pump filter until it is completely loose and remove it.

Clean any residues inside the filter as well as fibers, if any, around the propeller region.

If your product has a water jet feature, be sure to fit the filter into its housing in the pump. Never force the filter while replacing it into its housing. Fit the filter fully into its housing; otherwise, water may leak from the filter cap.

4- Close the filter cap.

Close the two-piecefilter cap of your product by pushing the tab on it.

Close the one-piecefilter cap of your product by fitting the tabs on the bottom into their positions and pushing the upper part of it.

28 EN

8 Troubleshooting

Problem

Cause

Explanation / Suggestion

 

Machine may have

 

Program

switched to self

Reset your machine by pressing “Start/Pause/

cannot be

protection mode due to

Cancel” button for 3 seconds. (see, Cancelling

started or

an infrastructure problem

a Program)

selected.

(such as line voltage,

 

 

water pressure, etc.).

 

 

There may be some water

 

Water in the

in your machine when you

 

receive it. This is from the

It is not harmful to your machine.

machine.

quality control process

 

 

 

 

and is normal.

 

 

 

Be sure the seals of the water inlet hoses are

There is water

There might be problems

securely fitted.

coming from

Tightly attach the drain hose to the waste pipe

with hoses or the pump

the bottom of

or sink.

filter.

the machine.

Make sure that the pump filter is completely

 

 

 

closed.

 

Tap may be turned off.

Open the inlet water taps fully.

Machine does

Water inlet hose might be

Straighten the water intake hose.

bent.

not fill with

 

 

Water inlet filter might be

 

water.

Clean the water intake filter.

 

clogged.

 

 

The door may be ajar.

Close the door.

Machine does

Water outlet hose might

Clean or straighten the hose.

be clogged or twisted.

not discharge

 

 

Pump filter may be

 

water.

Clean the pump filter.

 

clogged.

 

 

Machine feet might

Adjust the machine feet.

 

require adjustment.

 

 

 

Transportation safety

 

 

bolts might have not been

Remove the transportation safety bolts.

 

removed.

 

Machine

There may be a small

 

amount of laundry in the

Add more laundry to the machine.

vibrates or

machine.

 

shakes.

 

The machine may be

 

 

 

 

overloaded or the clothes

Reduce the amount of laundry in the machine

 

may be distributed

or balance the load by hand.

 

unevenly.

 

 

There machine might be

Ensure that nothing touches the machine.

 

touching a solid surface

 

 

Machine

 

 

stopped

Machine can stop

It will resume operating when the voltage is

shortly after

temporarily due to low

back to the normal level.

the program

voltage.

 

started.

 

 

29 EN

The water

 

 

being taken

Improper position of the

Connect the water draining hose as described

in is directly

drain hose.

in the operation manual.

discharged.

 

 

No water can

This is not a problem. The

 

be seen in

 

water level is not visible

 

the machine

 

from the outside of the

 

during

 

machine.

 

washing.

 

 

 

 

Water level might be

 

 

above the lower level of

Run either the “Pump” or “Spin” program.

 

the door.

 

 

Machine might be heating

 

The door is

up the water or it may be

Wait until the process is over.

at the spinning cycle.

 

jammed.

 

Due to electrical safety

 

 

 

 

mechanism, the door can

 

 

only be opened a few

Wait until the process is over.

 

minutes after the program

 

 

has stopped.

 

Machine fills

 

 

with water

Inside of machine may be

For safety reasons, water should be cycled in

when a

hot.

and out a couple times.

process is

 

 

cancelled.

 

 

 

 

The machine will wait until there is a sufficient

 

Water pressure may be

amount of water, which may lengthen the

 

low.

washing time to avoid poor washing results due

 

 

to insufficient water.

 

Supply voltage may be

Washing time is lengthened to avoid poor

 

low.

washing results when the supply voltage is low.

 

Input temperature of

Cycle time lengthens to heat up the water when

 

the input water is cold. Also, washing time can

 

water may be low.

Washing time

be lengthened to avoid poor washing results.

 

 

The automatic spin correction system might

takes longer

 

than the time

 

have been activated due to the unbalanced

specified in the

 

distribution of the laundry in the drum.

manual

There may be an

The laundry in the drum may be clustered

 

(bundled laundry in a bag). Laundry should be

 

imbalance of laundry in

 

rearranged and re-spun.

 

the machine.

 

No spinning is performed when the laundry is

 

 

 

 

not evenly distributed in the drum to prevent

 

 

any damage to the machine and to its

 

 

environment.

 

Number of rinses and/

Water amount is increased to obtain a

 

or amount of rinse water

better rinse and a rinse cycle is added when

 

might have increased.

necessary.

30 EN

 

In the case of a paused

 

 

countdown while taking in

The machine will wait until there is a sufficient

 

water:

amount of water to avoid poor washing results

 

Timer will not countdown

 

due to lack of water. Then the timer will start to

 

until the machine is filled

 

count down.

 

with the correct amount

 

 

 

of water.

 

 

In the case of a paused

 

 

countdown at the heating

 

It continuously

step:

 

Time will not count

 

washes.

down until the selected

 

Remaining

 

temperature for the

 

time does not

 

program is reached

 

count down.

 

 

The automatic spin correction system might

 

 

 

 

have been activated due to the unbalanced

 

In the case of a paused

distribution of the laundry in the drum.

 

countdown at the

The laundry in the drum may be clustered

 

spinning step:

(bundled laundry in a bag). Laundry should be

 

There may be an

rearranged and re-spun.

 

imbalance of laundry in

No spinning is performed when the laundry is

 

the machine.

not evenly distributed in the drum to prevent

 

 

any damage to the machine and to its

 

 

environment.

 

 

The automatic spin correction system might

 

 

have been activated due to the unbalanced

It continuously

 

distribution of the laundry in the drum.

 

The laundry in the drum may be clustered

spins.

There may be an

(bundled laundry in a bag). Laundry should be

Remaining

imbalance of laundry in

rearranged and re-spun.

time does not

the machine.

No spinning is performed when the laundry is

count down.

 

 

not evenly distributed in the drum to prevent

 

 

 

 

any damage to the machine and to its

 

 

environment.

 

 

The automatic spin correction system might

 

 

have been activated due to the unbalanced

 

There may be an

distribution of the laundry in the drum.

 

imbalance of laundry in

The laundry in the drum may be clustered

 

the machine. Therefore,

(bundled laundry in a bag). Laundry should be

 

the program might have

rearranged and re-spun.

It did not spin.

been completed without

No spinning is performed when the laundry is

 

spinning.

not evenly distributed in the drum to prevent

 

 

any damage to the machine and to its

 

 

environment.

 

The machine will not

- Check the filter.

 

spin if the water has not

 

- Check the drain hose.

 

completely drained.

 

 

31 EN

 

- Using insufficient

 

 

amount of detergent for a

 

 

long time,

- Use the recommended amount of detergent

 

- Washing at low

appropriate for water hardness and the laundry.

Washing

temperatures for a long

- Select the proper temperature for the laundry

performance is

time,

to be washed.

poor:

- Using insufficient

- If the water hardness is high, using an

Laundry turns

amount of detergent for

insufficient amount of detergent can cause

gray

hard waters (soil can stick

laundry to turn gray over time.

 

to the laundry),

- It is difficult to eliminate such grayness once

 

- Using excessive amount

it occurs.

 

of detergent (detergent

 

 

can stick to the laundry).

 

 

Insufficient amount of

Use recommended amount of detergent

Washing

detergent used.

appropriate for the laundry.

Excessive laundry loaded

 

performance is

Do not load the machine in excess.

poor:

into machine

 

Stain could not

Wrong program and

Select the proper program and temperature for

be removed,

temperature might have

the laundry to be washed.

not cleaned.

been selected.

 

Laundry

 

 

Improper detergent may

 

could not be

 

have been used.

 

whitened.

 

Wrong type of detergent

Put the detergent in the correct compartment.

 

 

used.

Do not mix detergent with bleaching agents.

 

 

Such odors and bacteria layers may be formed

 

 

on the drum as a result of continuous washing

Washing

 

at lower temperatures and/or in short programs.

 

Leave the detergent dispenser drawer as well

performance is

 

Oily accumulations on the

as the loading door of the machine ajar after

poor:

drum may have stuck to

each washing. Thus, a humid environment

Oily stains

the laundry.

favorable for bacteria cannot be created inside

appear on

 

the machine.

laundry.

 

 

Machine must be operated empty either at

 

 

 

 

60°C or 90°C program with detergent every 6

 

 

months.

Washing

Oily accumulations on the

Machine must be operated empty either at

performance is

drum may have stuck to

60°C or 90°C program with detergent every 6

poor:

the laundry.

months.

Bad odor

 

 

 

Excessive laundry might

Do not overload the machine.

 

have been loaded in.

 

 

Color of the

Detergent may have

Store detergent in a closed and dry place. Do

gotten damp.

not keep them under high temperatures.

clothes faded.

 

 

 

A higher temperature

Select the proper program and temperature

 

according to the type and soiling degree of the

 

might have been selected.

 

laundry.

32 EN

 

The amount, brand and

 

 

storage conditions of the

Store detergent in a closed and dry place. Do

 

detergent used might not

not keep them under high temperatures.

 

be appropriate.

 

 

Detergent might have

If detergent is put in the prewash compartment

 

although prewash cycle is not selected, the

 

been put in the wrong

 

machine can take this detergent during rinsing

 

compartment.

 

or softener step.

 

 

 

Machine filter may be

Check the filter.

It does not

clogged.

 

rinse well.

 

 

Drain hose may be folded.

Check the drain hose.

 

 

 

There may be an imbalance of laundry in the

 

 

machine.

 

 

The laundry in the drum may be clustered

 

Intermediate spins may be

(bundled laundry in a bag). Laundry should be

 

rearranged and re-spun.

 

skipped.

No spinning is performed when the laundry is

 

 

not evenly distributed in the drum to prevent

 

 

any damage to the machine and to its

 

 

environment.

 

 

If the water hardness is higher, using insufficient

 

Insufficient amount of

amount of detergent can cause the laundry to

 

detergent used.

become stiff in time. Use appropriate amount of

 

 

detergent according to the water hardness.

Clothes

 

If detergent is put in the prewash compartment

stiffened.

The detergent may have

although prewash cycle is not selected, the

 

been placed into the

machine can take this detergent during rinsing

 

wrong compartment; the

or softener step.

 

detergent may be mixed

Softener should not come into contact with

 

with the softener.

detergent when being added.

 

 

Wash and clean the drawer with hot water.

 

 

If the water hardness is higher, using insufficient

 

Insufficient amount of

amount of detergent can cause the laundry to

 

detergent used.

become stiff in time. Use appropriate amount of

 

 

detergent according to the water hardness.

Clothes do not

 

If detergent is put in the prewash compartment

smell like the

The detergent may have

although prewash cycle is not selected, the

softener.

been placed into the

machine can take this detergent during rinsing

 

wrong compartment; the

or softener step.

 

detergent may be mixed

Softener should not come into contact with

 

with the softener.

detergent when being added.

 

 

Wash and clean the drawer with hot water.

33 EN

 

Detergent may have been

Dry the detergent drawer before putting in

 

put in wet dispenser

detergent.

 

drawer.

 

 

 

Detergent may have

Store detergent in a closed and dry place. Do

 

gotten damp.

not keep them under high temperatures.

Detergent

 

 

Water pressure might be

 

residue in the

low

 

dispensing

 

 

The detergent in the main

 

drawer.

The detergent dispenser outlet (holes) may have

 

wash compartment might

a problem.

 

have gotten wet while

There might be problems with the detergent

 

taking in the prewash

 

dispenser valves.

 

water..

 

 

 

Detergent might be mixed

Softener should not come into contact with

 

with the bleaching agent.

detergent when being added.

 

Excessive laundry might

Do not load the machine in excess.

 

have been loaded in.

 

 

There is

Wrong program and

Select the proper program and temperature for

detergent left

temperature might have

the laundry to be washed.

on the laundry.

been selected.

 

 

Wrong detergent may

Use wool detergents for woolens.

 

have been used.

 

 

 

You may not be using

 

 

proper detergent for

Use only automatic washing machine

 

automatic washing

detergents in your washing machine.

 

machines.

 

 

Excessive amount of

 

 

detergent may have been

Use only sufficient amount of detergent.

 

used.

 

 

Too much detergent

 

 

may have been used for

Use only sufficient amount of detergent.

 

a small amount of lightly

 

 

 

soiled laundry.

 

 

Detergent may have been

Store detergent in a closed and dry location. Do

 

stored improperly.

not store in excessively hot places.

There is too

Type of material being

 

much foam.

washed (lace items will

Use smaller amounts of detergent for lace

 

cause excessive foam due

items.

 

to their meshed structure).

 

 

Detergent might have

If you put detergent in the prewash

 

compartment although you have not selected

 

been put in the wrong

 

a prewash cycle, the machine can take this

 

compartment.

 

detergent during rinsing or softener step.

 

 

 

 

You may have added too much softener.

 

 

The detergent dispenser might be problematic.

 

Softener being released

Water may be siphoned (pulling the softener

 

early.

into the washer early) during the fill or rinse

 

 

cycles.

 

 

There might be problems with the valves.

 

 

 

34 EN

10 Service

Please keep your purchase receipt or other proof of purchase in a safe place; you will need to have it should the product require attention under guarantee.

You should also complete the details below; it will help us assist you when requesting service. (The model number is printed on the Instruction Booklet and the serial number is printed on the

Rating Label affixed to the appliance)

Model No:

Serial No:

Retailer:

Date of purchase:

For service under guarantee simply telephone the appropriate number below

UK Mainland & Northern Ireland

Fridges & Freezers

0845 600 4903

Electric Cookers

0845 600 4902

Gas &

0845 600 4905

Dual Fuel Cookers

 

Washing Machines &

0845 600 4906

Dishwashers

 

Republic of Ireland

 

All Refrigeration,

01 862 3411

All Cookers

 

Washing Machines & Dishwashers

Before requesting service please check the trouble-shootingguide in the

Operating Instructions as a charge may be levied where no fault is found even though your product may still be under guarantee.

Service once the manufacturers guarantee has expired.

If you have purchased an extended guarantee please refer to the instructions contained within the extended guarantee

agreement document. Otherwise please call the appropriate number above where service can be obtained at a charge.

Should you experience any difficulty in obtaining service please contact the Beko Customer Help-Line.

Tel: 0845 600 4911 e-mail:service@beko.co.uk

35 EN