WM 5101 W
Please read this user manual first!
Dear Customer,
We hope that you get the best results from the product which has been manufactured in state-of-the-art plants and passed through a strict quality control procedure.
Therefore, please read the entire user manual carefully before using the product and keep it as a reference for future use. In case of transferring the product to someone else, give the manual as well.
The user manual will help you use your machine in a fast and safe way.
between models will be identified in the manual.
Explanation of symbols
Throughout this user manual the following symbols are used:
Important information or useful hints about usage.
Warning for hazardous situations with regard to life and property.
Warning for electric shock.
This appliance’s packaging material is recyclable. Help recycle it and protect the environment by dropping it off in the municipal facility provided
for this purpose. Your appliance also contains a great amount of recyclable material. It is marked with this label to indicate the used appliances that should not be mixed with other waste. This way, the appliance recycling organised
by your manufacturer will be done under the best possible conditions, in compliance with European Directive 2002/96/EC on Waste Electrical and Electronic Equipment. Contact your town hall or your retailer for the used appliance collection points closest to your home. We thank you doing your part to protect the environment.
2EN
TABLE OF CONTENTS
1 Your washing machine |
4 |
Overview . . . . . . . . . . . . . . . . . . . . . . . . 
Technical specifications . . . . . . . . . . . . . 
2 Important safety |
|
instructions |
6 |
General safety . . . . . . . . . . . . . . . . . . . . 6 Intended use . . . . . . . . . . . . . . . . . . . . . 6 Children's safety . . . . . . . . . . . . . . . . . . 
3 Installation |
8 |
. . . . . . . 8
. . . . 8
. . . . . 8 Connecting water supply . . . . . . . . . . . . 9 Connecting to the drain . . . . . . . . . . . . . 9
. . . . . . . . . . . . . . . . . 
Electrical connection . . . . . . . . . . . . . . 
First use . . . . . . . . . . . . . . . . . . . . . . . 
Disposing of packaging material . . . . . 
Transportation of the product. . . . . . . . 
Disposing of the old product . . . . . . . . 
4 Preparation |
13 |
Things to be done for energy saving . . 
Sorting the laundry . . . . . . . . . . . . . . . 
Preparing laundry for washing . . . . . . . 
Correct load capacity . . . . . . . . . . . . . 
Loading the laundry . . . . . . . . . . . . . . . 
Using detergent and softener . . . . . . . 
Tips for efficient washing . . . . . . . . . . . 
5 Operating the product |
18 |
Control panel. . . . . . . . . . . . . . . . . . . . 
Preparing the machine. . . . . . . . . . . . . 
Programme selection. . . . . . . . . . . . . . 
Main programmes . . . . . . . . . . . . . . . 
Temperature selection . . . . . . . . . . . . . 20 Spin speed selection . . . . . . . . . . . . . . 20 Programme selection and consumption table . . . . . . . . . . . . . . . . . . . . . . . . . . 
. . . . . . . . . . 22 Starting the programme. . . . . . . . . . . . 22 Child Lock . . . . . . . . . . . . . . . . . . . . . . 22 Progress of programme. . . . . . . . . . . . 23 Loading door lock . . . . . . . . . . . . . . . . 23 Changing the selections after programme has started . . . . . . . . . . . . . . . . . . . . . 23 Cancelling the programme . . . . . . . . . .
End of programme . . . . . . . . . . . . . . . 
6 Maintenance and cleaning25
Cleaning the detergent drawer. . . . . . . 
Cleaning the loading door and the
drum . . . . . . . . . . . . . . . . . . . . . . . . . . 
Cleaning the body and control panel . . 
Cleaning the water intake filters . . . . . . 
Draining remaining water and cleaning the pump filter . . . . . . . . . . . . . . . . . . . . . . 26
7 |
Troubleshooting |
28 |
8 |
Guarantee |
34 |
|
|
|
9 |
Service |
35 |
|
|
|
3EN
1Your washing machine
Overview
8 |
1 |
|
2 |
|
3 |
7 |
|
6 
4
5
1PXFS DBCMF |
|
"EKVTUBCMF GFFU |
2- Top panel |
|
6- Loading door |
3- Control panel |
|
%FUFSHFOU ESBXFS |
'JMUFS DBQ |
|
8- Drain hose |
EN
WM 5101 W
5
84
60
48
59
230V~ / 50Hz
10
2200
1000
1.00
0.25
2 Important safety instructions
This section contains safety instructions that will help protect from risk of personal
these instructions shall void any warranty.
General safety
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance
by a person responsible for their safety. Children should not play or tamper with
the appliance.Cleaning and user maintenance should never be performed by children unless supervised by a responsible adult.
Never place the product on a carpet-
covered floor; otherwise, lack of airflow beneath the machine will cause electrical parts to overheat. This will cause problems with your product.
Do not operate the product if the power cable / plug is damaged. Call
the Authorised Service Agent.
Ensure that the product is located close to and connected to an accessible properly earthed and fused mains socket outlet.
be operated unless it is repaired by the
Authorised Service Agent.There is the risk of electric shock!
operating in the event of powering on after a power interruption. If you wish to cancel the programme, see "Cancelling the programme" section.
outlet protected by a fuse complying with the values in the "Technical specifications" table. Do not neglect to have the grounding installation made
by a qualified electrician. Our company shall not be liable for any damages that will arise when the product is used without grounding in accordance with the local regulations.
must be securely fastened and remain undamaged. Otherwise, there is the risk of water leakage.
the filter while there is still water in the drum. Otherwise, risk of flooding and
door. The loading door will be ready
washing cycle comes to an end. In case of forcing the loading door to open, the door and the lock mechanism may get damaged.
or pouring water onto it! There is the risk of electric shock!
Never unplug by pulling on the cable, always pull out by gripping the plug.
supplements suitable for automatic washing machines only.
tags and on the detergent package.
installation, maintenance, cleaning and repairing procedures.
repairing procedures carried out by authorised persons
Manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorised persons.
Intended use
domestic use. It is not suitable for commercial use such use may invalidate the warranty.
washing and rinsing of laundry that are marked accordingly.
6 EN
t 5IF NBOVGBDUVSFS XBJWFT BOZ responsibility arisen from incorrect usage or transportation.
Children's safety
t &MFDUSJDBM QSPEVDUT BSF EBOHFSPVT GPS UIF DIJMESFO ,FFQ DIJMESFO BXBZ GSPN the product when it is in use. Do not let them to tamper with the product. Use child lock to prevent children from intervening with the product.
t %P OPU GPSHFU UP DMPTF UIF MPBEJOH door when leaving the room where the product is located.
t 4UPSF BMM EFUFSHFOUT BOE BEEJUJWFT JO B safe place away from the reach of the children.
EN
3Installation
To make the product ready for use, review the information in the user manual
and make sure that the electricity, tap water supply and water drainage systems are appropriate before installation. If they are not ,call a qualified technician and
plumber to have any necessary arrangements carried out.
Preparation of the location and electrical, tap water and waste water installations at the place of installation is the customer's responsibility.
Installation and electrical connections of the product must be carried out by the a competent person. Manufacturer shall not be held liable for damages that may arise from
procedures carried out by unauthorised persons.
Prior to installation, visually check if the product has any defects on it. If so, do not have it installed. Damaged products cause risks for your safety.
Make sure that the water inlet and discharge hoses as well as the power cable are not folded, pinched or crushed while pushing the product into its place after installation or cleaning procedures.
Appropriate installation location
not place it on a long pile rug or similar surfaces.
and the dryer -with full loadwhen they are placed on top of each other
Place the product on a solid and flat floor that has sufficient load carrying capacity!
cable.
where temperature may fall below 0ºC.
from the edges of other furniture.
Removing packaging reinforcement
Tilt the machine backwards to remove
packaging reinforcement by pulling the ribbon.
Removing the transportation locks
bolts before operating the washing machine, otherwise, the product will be damaged.
they rotate freely (C).
turning them gently.
8EN
the User Manual bag into the holes on the rear panel. (P)
a safe place to reuse when the washing machine needs to be moved again in the future.
Never move the product without the transportation safety bolts properly fixed in place!
Connecting water supply
The water supply pressure required
from the fully open tap in one minute to have your machine run smoothly.
water pressure is higher.
Models with a single water inlet should not be connected to the hot water tap. In such a case the laundry will get damaged or the product will switch to protection mode and will not operate. Do not use old or used water inlet hoses on the new product. It may cause stains on your laundry.
with the product to the water inlet
2.Tighten all hose nuts by hand. Never use a wrench when tightening the nuts.
3.Open the taps completely after making the hose connection to check for water leaks at the connection points. If any leaks occur, turn off the tap and
carefully after checking the seal. To prevent water leakages and damages caused by them, keep the taps closed when the machine is not in use.
Connecting to the drain
directly connected to the wastewater drain or to the washbasin.
Your house will be flooded if the hose comes out of its housing during water discharge. Moreover, there is risk of scalding due to high washing temperatures! To prevent such
situations and to ensure smooth water intake and discharge of the machine, fix the end of the discharge hose tightly so that it cannot come out.
most.
9EN
t *O DBTF UIF IPTF JT FMFWBUFE BGUFS laying it on the floor level or close to
UIF HSPVOE MFTT UIBO DN BCPWF UIF ground), water discharge becomes more difficult and the laundry may come out excessively wet. Therefore, follow the heights described in the figure.
t 5P QSFWFOU GMPXJOH PG EJSUZ XBUFS CBDL into the machine and to allow for easy discharge, do not immerse the hose end into the dirty water or drive it in the
ESBJO NPSF UIBO DN *G JU JT UPP MPOH cut it short.
t 5IF FOE PG UIF IPTF TIPVME OPU CF bent, it should not be stepped on and the hose must not be pinched between the drain and the machine.
t *G UIF MFOHUI PG UIF IPTF JT UPP TIPSU use it by adding an original extension hose. Length of the hose may not be longer than 3.2 m. To avoid water leak failures, the connection between the extension hose and the drain hose of the product must be fitted well with an appropriate clamp as not to come off and leak.
Adjusting the feet
AIn order to ensure that the product operates more silent and vibration-free, it must stand level and balanced on its
GFFU #BMBODF UIF NBDIJOF CZ BEKVTUJOH the feet. Otherwise, the product
may move from its place and cause crushing and vibration problems.
-PPTFO UIF MPDL OVUT PO UIF GFFU CZ hand.
"EKVTU UIF GFFU VOUJM UIF QSPEVDU TUBOET level and balanced.
3. Tighten all lock nuts again by hand.
ADo not use any tools to loosen the lock nuts. Otherwise, they will get damaged.
Electrical connection
Connect the product to a grounded outlet protected by a fuse complying with the values in the "Technical specifications" table. Our company shall not be liable
for any damages that will arise when the product is used without grounding in accordance with the local regulations.
t $POOFDUJPO NVTU DPNQMZ XJUI OBUJPOBM regulations.
t 1PXFS DBCMF QMVH NVTU CF XJUIJO FBTZ reach after installation.
t 5IF WPMUBHF BOE BMMPXFE GVTF PS breaker protection are specified in the “Technical specifications” section. If the current value of the fuse or breaker in
UIF IPVTF JT MFTT UIBO "NQT IBWF B RVBMJGJFE FMFDUSJDJBO JOTUBMM B "NQ
EN
fuse.
your mains voltage.
cables or multi-plugs.
Damaged power cables must be
Electrical requirements
Before you insert the plug into the wall socket make sure that the voltage and the frequency shown in the rating label corresponds to your electricity supply. We recommend that this appliance be connected to the mains supply via a suitable switched and fused socket in a readily accessible position.
Should the mains lead of the appliance become damaged or need replacing at any time, it must be replaced by a special purpose made mains lead which can only
This appliance must be earthed
If the fitted moulded plug is not suitable for your socket, then the plug should be cut off and an appropriate plug fitted.
Destroy the old plug, which is cut off as a plug with a bared cord could cause a shock hazard if inserted into a socket elsewhere in the house.
The moulded plug on this appliance
used. Do not forget to refit the fuse cover. In the event of losing the fuse cover, the plug must not be used until a replacement fuse cover has been fitted. Colour of the replacement fuse cover must be the same colour as that visible on the pin face of the plug. Fuse covers are available from any good electrical store.
Important
Fitting a different plug
lead of this appliance may not correspond with the coloured markings identifying the terminals on your plug, proceed as follows:
(earth) wire to the terminal in the plug marked ‘E’ or with the symbol f or coloured green and yellow or green.
2Connect the blue (neutral) wire to the terminal in the plug marked ‘N’ or coloured black.
3Connect the brown (live) wire to the terminal in the plug marked ‘L’ or coloured red.
be fitted either in the plug or adaptor or in the main fuse box. If in doubt contact a qualified electrician.
First use
Before starting to use the product, make sure that all preparations are made in accordance with the instructions in sections "Important safety instructions" and "Installation".
To prepare the product for washing laundry, first perform a Drum Cleaning
programme. If your machine is not featured with Drum Cleaning programme, use Cottons-90 programme and select
functions as well. Before starting the
EN
Loading...