Beko HPS-100 User Manual

Size:
295.42 Kb
Download

Model No: HPS-100

HOME THEATRE SPEAKER SET

Thank you very much for purchasing our product. Please read this instruction manual completely before connecting and operating the machine for best performance and safety.

Contents

1.Contents/Features

2.Precautions

3.Safety Warnings

4.Front Panel Operation

5.Rear Panel Setting

6.Connection with Sound Source and Satellites

7.Operation Instruction

8.Trouble Shooting

9.Specifications

Features

1.5.1 channel connection to DVD player

2.Compatible with AC-3& DTS connection

3.Individual Woofer Volume Adjust

4.Master Volume Adjust

5.Ultra slim card-likesize remote control

6.Satellites are desk & wall-mountable

Precautions

CAUTION: To reduce the risk of electric shock, do not remove the cover or back. Refer servicing to qualified service personnel.

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

The apparatus should not be exposed to dripping or splashing area. No objects filled with

liquids, such as vases, should be placed on the apparatus.

Safety Warnings

Leave 15cm for ventilation.

Do not block the pipe of the subwoofer.

Do not open the cover and do not repair yourself. Refer servicing to qualified personnel.

Do not function the system when liquid gets into the subwoofer.

Do not climb on this system.

Pull out the plug while smoke, particular smell or noise inside.

Front panel operation

1.Remote sensor

2.Power LED light

3.Power On/ Off Button

Rear panel setting

1.Front Left and Right Input terminal 2.Center Input terminal 3.Subwoofer Input terminal

4.Rear Left and Right Input terminal

5.Front Right channel speaker input terminal

6.Front Left channel speaker input terminal

7.Rear right channel speaker input terminal

8.Center channel speaker input terminal

FUSE

AC POWER

9. Rear left channel speaker input terminal

Connections with sound source and satellites

1.Connection with sound source equipment

2.Connection with satellite speakers

FUSE

AC POWER

Operation instructions

1. Stereo / 5.1 Mode Selection

For stereo mode, please connect the sound source with Front L and Front R input terminal. This unit is AC-3and DTS compatible. For 5.1 sound effect, please connect it with 5.1 input terminals.

2. Power On

Front panel operation

Press the Power button and once LED light flickers, this product is connected with power.

3. Master and Woofer Volume adjust

Remote control operation

.Press button of “Master ” or “Master ” to increase or decrease the volume of whole speaker system.

.Press button of “Woofer ” or “Woofer ” to increase or decrease the volume of whole speaker system.

4. Power off

Front Panel Operation

Press the Power button again and once LED light diminishes, this product is disconnected from power.

Trouble Shooting

Problem

 

Cause

Solution

 

z

Improper connection of

z Ensure that the equipment

 

 

speaker terminal.

is connected properly.

 

z

Improper connection of

z Ensure that the sound

 

 

sound frequency

frequency is connected

 

 

terminal.

properly.

No sound

z

Improper connection of

z Insert the AC plug securely

 

 

 

AC plug and the socket.

into the AC outlet.

 

z Volume is too low.

z Increase the volume with

 

 

 

volume controlling button.

 

z The speaker terminal is

z Cut off power, reconnect

 

 

short-circuited

the speaker, then start the

 

 

 

power again.

 

z

Improper connection of

z Ensure that the input

 

 

amplifier input terminal.

terminal is connected

Sound distortion

 

 

properly.

z

The volume is too high.

z Lower the volume with

 

 

 

volume controlling button.

 

 

 

 

 

z

Improper connection of

z Ensure that the input

Sound only from

 

amplifier input terminal

terminal is connected

 

 

properly

one channel

 

 

z

Input level is too high

z Adjust the woofer and

 

 

 

 

master volume properly

 

z The battery has gone

z Replace with new

Remote control

 

off.

batteries.

 

 

 

fails to work

z

Interference by strong

z Keep the sensor away

 

 

 

and direct sunlight.

from sunlight.

 

z Obstacle in front of the

z Remove the obstacle.

 

sensor.

 

 

 

 

Technical Data

Model No.:

 

 

Power/Frequency:

230 V

~50Hz

Watts:

Subwoofer: 30W

Satellite: 15WX5