Beko DRVT 61 W User Manual

0 (0)
Beko DRVT 61 W User Manual

Vented

Time Dryer

DRVT 61 W

Read this manual prior to initial operation of the product!

Dear Customer,

We hope that your product, which has been manufactured in modern facilities and passed through a strict quality control procedure, will give you very good results. We advise you to read through this manual carefully before using your product and keep it for future reference.

This User Manual will

Help you use your machine in a fast and safe way.

Read the User Manual before installing and starting your product.

In particular, follow the instructions related to safety.

Keep this User Manual within easy reach for future reference.

Please read all additional documents supplied with your product. Remember that this User Manual is also applicable for several other models.

Explanation of symbols

Throughout this User Manual the following symbols are used:

AImportant safety information. Warning for hazardous situations with regard to life and property.

BCaution; Warning for supply voltage.

Caution; Warning for fire hazard.

Caution; Warning for hot surfaces.

Read the instructions.

CUseful information. Important information or useful hints about usage.

This appliance’s packaging material is recyclable. Help recycle it and protect the environment by dropping it off in the municipal receptacles provided for this purpose.

Your appliance also contains a great amount of recyclable material. It is marked with

this label to indicate the used appliances that should not be mixed with other waste. This way, the appliance recycling organised by your manufacturer will be done under the best possible conditions, in compliance with European Directive 2002/96/EC on

Waste Electrical and Electronic Equipment. Contact your town hall or your retailer for the used appliance collection points closest to your home. We thank you doing your part to protect the environment.

2960310271/171209.1524

TABLE OF CONTENTS

 

1

Your Dryer

4

Overview........................................

4

2 Important safety information6

General safety................................

6

Intended use..................................

7

Children’s safety.............................

7

3

Installation

8

Appropriate installation location......

8

Under counter installation...............

8

Ventilation hose and connection (for

products equipped with an outlet

 

vent)...............................................

8

Adjusting feet.................................

9

First use.........................................

9

Disposing of packaging material.....

9

Transportation of the machine........

9

Disposing of the old machine.........

9

4

Electrical Connection

10

Electrical requirements.................

10

Fitting a different plug ..................

10

5 Initial preparations for drying11

Things to be done for energy

 

saving:.........................................

11

Laundry suitable for drying in the

 

machine.......................................

11

Laundry unsuitable for drying in the

machine.......................................

11

Preparing laundry for drying..........

12

Correct load capacity...................

12

Loading........................................

12

6 Selecting a Programme and

 

Operating Your Machine

13

Control panel................................

13

Preparing the machine.................

14

Timer programme selection..........

14

Main programmes........................

14

Programme selection and

 

consumption table.......................

15

Auxiliary function..........................

16

Warning indicators.......................

16

Starting the Programme...............

16

Timer follow-up indicator..............

16

Changing the programme after the

programme has started................

16

Child-proof lock............................

16

Ending the programme through

 

canceling.....................................

17

End of programme.......................

17

7 Quick instructions for daily use

18

8Maintenance and cleaning 19

Fluff filter ......................................

19

9

Solution suggestions for

 

problems

20

10

Door Reversal

21

11

Guarantee

22

What is covered?.........................

22

What is not covered?...................

22

Important notes............................

22

12

Service

23

3 EN

1 Your Dryer

Overview

5

1

2

3

4

1- Rating label

 

4- Adjustable Feet

2- Control Panel

 

5- Power Cord

3- Fluff filter

 

 

4 EN

Technical Specifications

EN

Height (adjustable)

85.0 cm

 

 

Width

59.5 cm

 

 

Depth

54 cm

 

 

Capacity (max.)

6 kg

 

 

Weight (net)

31 kg

 

 

Voltage

 

 

 

Rated power input

See rating label

 

 

Model code

 

 

 

Type label is located behind the loading door.

Specifications of this appliance may change without notice to improve the quality of the product. Figures in this manual are schematic and may not match your product exactly. Values stated on the machine labels or in the documentation accompanying it are obtained in laboratory in accordance with the relevant standards. Depending on operational and environmental conditions of the appliance, values may vary.

5 EN

2 Important safety information

 

This section includes safety information that will help protection from risks of

personal injuries or materialistic damages.

 

 

to power supply in order to decrease

Failure to follow these instructions

 

 

the risk of electric shock.

shall cause any warranty and reliability

 

Do not make any changes on the plug

commitment to become void.

 

 

supplied with the product. If it is not

General safety

 

 

compatible with the socket, have a

Never place the machine on a carpet-

 

 

qualified electrician change the socket

 

 

with a suitable one.

 

covered floor, otherwise, lack of airflow

 

 

 

 

Items cleaned or washed with gasoil/

 

beneath the machine may cause

 

 

 

 

fuel oil, dry-laundry solvents and other

 

electrical parts to overheat. This will

 

 

 

 

 

combustible or explosive materials as

 

cause problems with your machine.

 

 

 

 

 

well as the items that are contaminated

If the power cable or mains plug is

 

 

 

 

or spotted with such materials should

 

damaged, you must call Authorised

 

 

 

 

 

not be dried in the product since they

 

Service Agent for repair.

 

 

 

 

 

emit flammable or explosive vapor.

The product should not be plugged

 

 

 

Do not dry items cleaned with

 

in during installation, maintenance

 

 

 

 

industrial chemicals in the dryer.

 

and repair works. Such works should

 

 

 

 

Do not dry unwashed items in the

 

always be made by the technical

 

 

 

 

dryer.

 

service. Manufacturer shall not be held

 

 

 

 

Items soiled with cooking oils,

 

responsible for damages arising from

 

 

 

 

acetone, alcohol, fuel oil, kerosene,

 

processes carried out by unauthorised

 

 

 

 

 

stain remover, turpentine, paraffin and

 

persons.

 

 

 

 

 

paraffin removers must be washed

Connect the product to a grounded

 

 

 

 

in hot water with plenty of detergent

 

outlet protected by a fuse of suitable

 

 

 

 

 

before being dried in the dryer.

 

capacity as stated in the technical

 

 

 

 

Garments or pillows bolstered with

 

specifications table.

 

 

 

 

rubber foam (latex foam), shower

Operate your product at temperatures

 

 

 

 

bonnets, water resistant textiles,

 

between +5°C and +35°C.

 

 

 

 

 

materials with rubber reinforcement

Do not use electrical devices in the

 

 

 

 

and rubber foam pads should not be

 

product.

 

 

 

 

 

dried in the dryer.

Do not connect the air exit of the

 

 

 

Do not use fabric softeners and

 

product to the chimney holes which

 

 

 

 

anti-static products unless they are

 

are used for the exhaust fumes of the

 

 

 

 

 

recommended by the manufacturers of

 

devices operating with gas or other

 

 

 

 

 

the fabric softener or the product.

 

types of fuel.

 

 

 

 

This product must be earthed.

You must provide enough ventilation

 

 

 

Grounding installation decreases

 

in order to prevent gases exiting from

 

 

 

 

 

the risk of electric shock by opening

 

devices operating with other types of

 

 

 

 

 

a path with low resistance for the

 

fuels including the naked flame from

 

 

 

 

 

electricity flow in case of a malfunction

 

accumulating in the room due to the

 

 

 

 

 

or failure. Power cable of this product

 

back fire effect.

 

 

 

 

 

is equipped with a conductor and

• Always clean the lint filter before or

 

 

 

 

a grounding plug that allows for

 

after each loading.

 

 

 

 

 

grounding the product. This plug must

Never operate your dryer without the

 

 

 

 

be installed appropriately and inserted

 

lint filter installed.

 

 

 

 

 

into a socket which is grounded in

Do not allow fibre, dust and dirt

 

 

 

 

accordance with the local laws and

 

accumulation around the exhaust exit

 

 

 

 

 

regulations.

 

and at adjacent areas.

 

 

 

 

Do not install the product behind a

Power cable plug must be within easy

 

 

 

door with a lock, sliding door or a door

 

reach after installation.

 

 

 

 

 

that has a hinge against the hinge of

Do not use extension cords, multi-

 

 

 

 

the dryer.

 

plugs or adaptors to connect the dryer

 

 

 

 

• Do not install or leave this product

 

 

 

 

6

 

EN

 

 

 

 

 

 

 

in places where it will be exposed to outdoor conditions.

Do not tamper with the controls.

Do not perform any repair or part replacing procedures on the product even if you know or have the ability to perform unless it is clearly suggested in the operating instructions or the published service manual.

Inside and exhaust duct of the product must be cleaned by the qualified service personnel periodically.

Wrong connection of grounding conductor of the product can cause electric shock. If you have any suspect about the grounding connection, have it checked by a qualified electrician, service representative or service personnel.

Do not reach into the machine when the drum is spinning.

Unplug the machine when it is not in use.

Never wash down the appliance with water! There is the risk of electric shock! Always disconnect by unplugging from the mains before cleaning.

Never touch the plug with wet hands. Never unplug by pulling on the cable, always pull out by grabbing the plug only. Do not operate the machine if the power cable or plug is damaged!

Never attempt to repair the machine yourself, otherwise, you will be putting your life and others’ lives in danger.

For malfunctions that cannot be solved by following the information given in the safety instructions:

Turn off the machine and contact an authorised service agent.

Do not stop the dryer before the drying cycle comes to an end unless you will remove all laundry from the dryer fast in order to lay them and dissipate the heat.

Remove the door of the drying compartment before decommissioning or disposing of the product.

The final step of the drying cycle (cooldown cycle) occurs without applying heat to ensure that the items are left at a temperature that will not damage them.

Fabric softeners or similar products should be used as specified by the fabric softener instructions.

Underwear that contains metal reinforcements should not be placed in a dryer. Damage to the dryer can result if metal reinforcements come loose during drying.

Check all garments for forgotten lighters, coins, metal pieces, needles, etc. before loading.

At times when your dryer is not in

use or after the laundry is taken out following the completion of drying process, turn off by using the On/ Off button. In cases when the On/

Off button is on (while the dryer is energized), keep the door of the dryer closed.

Intended use

This product has been designed for domestic use. It should not be used for other purposes.

Use the product only for drying laundry that are marked accordingly.

Dry only those articles in your product that are stated in this manual.

This product is not intended to be used by persons with physical, sensory or mental disorders or unlearned

or inexperienced people (including children) unless they are attended by a person who will be responsible for their safety or who will instruct them accordingly for use of the product.

Children’s safety

Electrical appliances are dangerous for the children. Keep children away from the machine when it is operating. Do not let them tamper with the machine.

Packaging materials are dangerous to children. Keep the packaging materials out of reach of children or dispose them by classifying according to waste directives.

Do not allow children sit/climb on or enter in the product.

Children should be supervised to ensure that they do not play with the product.

Close the loading door when you leave the area where the product is located.

7 EN

3 Installation

Refer to the nearest Authorised Service

Agent for installation of your product.

CPreparation of location and electrical installation for the product is under customer’s responsibility.

B Installation and electrical connections must be carried out by a qualified personnel.

A Prior to installation, visually check if the product has any defects on it. If so, do not have it installed. Damaged products will cause risks for your safety.

Appropriate installation location

• Install the product in an environment which has no risk of freezing and is in a stable and level position.

• Operate your product in a well ventilated, dust-free environment.

• Do not block the air ducts in front of and under the product with materials such as long pile rugs and cupboard plinths.

• Do not place your product on a long pile rug or on similar surfaces.

• Do not install the product behind a door with a lock, sliding door or a hinged door which can strike the product.

• Once the product is installed, it should stay at the same place where its connections have been made. When installing the product, make sure

that the rear wall of it does not touch anywhere (tap, socket, etc.) and also pay attention to install the product at a place where it will stay permanently.

BDo not place the product on top of the power cable.

Keep at least 1.5 cm distance to walls of other furniture.

Under Counter Installation

Leave at least 3 cm of space between the side and rear walls of the machine and the walls of the counter/cupboard when installing your machine under a counter or in a cupboard. Never use the tumble dryer without top plate.

Ventilation hose and connection (for products equipped with an outlet vent)

Ventilation hose assures exhausting of the air from inside the machine.

Vented dryer has 1 air outlet.

Stainless sheet metal or aluminum pipes can be used instead of the hose. The diameter of the pipe to be used should be minimum 10 cm.

Maximum hose and pipe lengths are given in the table below.

 

 

Hose

Pipe

 

Maximum length

4 m

5 m

 

1 elbow 45°

-1.0 m

-0.3 m

 

1 elbow 90°

-1.8 m

-0.6 m

 

1 elbow 90° short

 

-2.7 m

 

1 wall passage

-2.0 m

-2.0 m

 

C Each elbow and

other passages

 

should be subtracted from the above

 

maximum length.

 

 

To connect a ventilation hose;

 

1.Connect the air outlet hose to the hose spacer piece by turning it anticlockwise.

2.Make the hose passages as shown below.

C Exhaust of humid air from the dryer into the room is inconvenient. It may damage the walls and furniture in the room.

C The ventilation hose can be routed outdoors via a window or it can be connected to an air outlet in the wall (see diagram below).

C Air outlet hose must be extended directly to the outdoors. There must be a small number of elbows as not to hinder air ventilation.

C To prevent water accumulation in the hose, make sure that it is not folded on the floor.

8 EN

Loading...
+ 16 hidden pages