Beko 37WLU550FHID User Manual
TABLE OF CONTENTS
7.1- Sound Menu Settings..........................................................................
1 Important Information
LCD panels are produced with
After powering off, wipe the screen and the cabinet clean with a soft and dry cloth. We recommend that you do not use patented polishes or solvents on the screen or cabinet since they may cause damage.
The cold cathode fluorescent lamp found in your LCD screen contains a very small amount of mercury. Once your TV reaches the end of its useful life, please dispose of it in accordance with local government regulations or leave it at a recycling centre.
This television can receive and process all analogue and digital broadcasts. This television set has an integrated digital and analogue receiver. The digital receiver unit processes the signals coming from digital transmitters and converts them into superior sound and image quality. TV Guide (valid for digital broadcasts only) informs you about changes in the program list briefly and provides program lists of all digital broadcasts for a number of forthcoming days. You can display detailed information about each program by pressing a single button if this feature is supported by the broadcaster. This television has a comprehensive and user friendly menu configuration.
You will need an outdoor aerial to receive digital broadcasts. Contrary to the analogue broadcasts, all digital broadcasts may not have their own transmission frequency. Instead, various digital broadcasts channels are gathered in regional or national groups called bouquets. You can find current transmission data from teletexts of various broadcasters or from TV guide or from the internet.
•HD signals must be connected to the HDMI input or component (YPbPr) inputs. See page 8 for external connections.
•You should check your postcode to make sure that you are in freeview coverage area (www.freewiew.co.uk).
The supplied mains cable already has a mains plug fitted, however should you need to replace it at any time please refer to the appropriatte wiring information below for your particular cable.
2 Features of your new television
We would like this product, which has been manufactured in modern facilities in accordance with total quality principles, to offer you the best performance. Therefore, please read this
entire manual carefully before you use your TV and keep it in a safe place for future reference.
•CI Slot input
•Favourite channel list in digital mode (maximum 6 lists)
•Compatible with cable broadcasts
•Wide angle of vision
•PIP (Picture in Picture) from AV
•Scart socket, AV Socket and external sound system connection
•Low energy consumption
•SRS TruSurround sound
•DNR and MPEG NR
•Programmable power on
•Programmable power off
•250 pages Teletext
•Sharpness feature in Colour Transitions (CTI)
•Sharpness feature and picture resolution (LTI) in
•A clearer Picture made possible with a Digital Comb Filter
•Manual Fine Tuning
•100 Analog Program memory
•1000 Digital channel memory
•Infrared remote control equipped with all functions
•Ability to watch NTSC broadcast via Scart input
•4:3, 16:9, 14:9 Letterbox, Subtitle and Panorama picture formats
HDMI, the HDMI logo and
•Cover a table with a soft towel (or other protection to prevent damage to the TV or table)
•Carefully lay the T.V. front down on the table
• position the T.V. table stand so that it hangs over the edge of the table
•Remove the screws that hold the stand to the T.V. (A torx screwdriver is required
•Remove the stand.
•Attach any new brackets before lifting T.V. back up.
Note: Keep removed stand and screws safely for future use.
3 Important Safety Instructions
This symbol is used to warn the user about the “dangerous voltage” contained inside the housing of the product that may create a risk of electrical shock.
This symbol is used to remind the user important usage and service instructions supplied with the TV.
1) PleaseREAD the operating instructions before using the TV for the first time.
2) Please observe the instructions contained in the Operating Instructions.
3)Please consider all warnings.
4)MAKE SURE that all
(extension cables and the connections between the TV components) have been made properly and
in accordance with the manufacturer’s instructions. Before making or changing the connections, power off the TV and unplug the mains connection plug.
5)If you have any doubts regarding the installation, operation or safety of the TV, please REFER to the retailer.
6)BE CAREFUL with glass panels and covers on the TV. The screen glass may break and cause serious injuries if something hits it.
7)To ensure adequate ventilation, please leave a clearance area of at least 10 cm
around the television. This clearance prevents the TV from overheating and consequently causing damage.
•Using the TV in dusty environments should also be avoided.
•Never block the slots and openings by placing the TV on a bed, sofa, pillow or other similar surfaces.
•Never install the TV into closed places such as bookcases or cabinets unless adequate ventilation is provided.
8) DO NOT COVER the ventilation openings
of the TV with items such as newspapers,
etc. Overheating causes damage and shortens the service life of the TV.
9) Your TV may be damaged
if you place it under direct sunshine or close
to a heater. Please abstain from using the product in very hot or
humid locations or in places where the temperature is likely to decrease below
5°C (41°F). DO NOT PLACE on or near the TV any hot objects or items with open flame such as candles or any night lamps. The high temperature can melt plastic parts and cause a fire.
10) Never operate your
TV close to water. Operating your TV, for example, near a bathtub, washbasin,
kitchen washbasin, washing basin, wet basement and swimming pool can cause fire or electric shock.
•Do not allow your TV to get wet. Never pour any liquids onto
the TV. Do not operate
your TV if any solid or liquid substance enters into it. This can
cause electric shock and your TV may be damaged. Have it checked immediately by qualified personnel.
•Keep open flame sources (such as
candles) away from TV in order to avoid risk of
11) DO NOT USE headphones at extremely high volume levels since this may
cause permanent loss of hearing.
12) Operate your TV only in the 230 V 50Hz voltage
range. Use the AC power
cable supplied with the product. If your TV is a grounded (Class I) product, then it must certainly be connected to
a grounded socket.
•The socket into which you plug in the
AC power cable must be within easy reach.
•Unplug the TV in order to disconnect it from mains power.
Note: Do not use defective sockets. Make sure that the plug is firmly inserted into the socket. If the plug remains loose, then it can cause fire due to arcing. Refer to an electrician to have your socket replaced.
13) Make sure that the power cable is not stepped on and that there is no bendingat the plug sections, plug
heads and TV output point.
14)Use only the
15) Use only brackets orstands specified by themanufacturer or sold alongwith the product. Place yourdevice on a level surface.
16) Unplug the power cable during thunderstorms or when you will not use your TV for a long period of time.
17)Consult authorised service personnel for
Never attempt to repair the TV yourself. Opening the cabinet
can expose you to dangerous voltages or other hazardous situations. Service is required in situations such as damage to the power cable of the TV or its plug, water spills or substances falling into the TV, the TV is subjected to rain or moisture, it does not operate normally or it is dropped.
18) Wipe the TV cabinet
clean with a soft and dry cloth. Wipe dust from the screen gently with a soft cloth. Stubborn stains
can be cleaned with a cloth slightly moistened
with soap and lukewarm water. Never use solvents such as thinner or gasoline for cleaning. Unplug the AC power cable from the socket when cleaning the TV. Otherwise, there is the risk of electric shock.
19)Do not dispose of the batteries in fire.
• Do not short circuit, dismantle or overheat
the batteries. There is the risk of explosion
if the batteries are not replaced correctly. Replace only with the same or equivalent type batteries.
20) Disposing of the exhausted batteries:
•Dispose of the exhausted
batteries in accordance with
the local laws and regulations in order to protect our environment.
21) Do not dispose of your TV with regular household waste. Observe local laws and regulations for disposal.
Note 1: This is a Class A product. During operation, the device can cause radio interference. In this case the user may have to remedy this. Please contact your specialist dealer.
Note 2: Electromagnetic fields can cause temporary performance degradation. This can be distinguished as noise in the image.
Remove your television carefully from its box. You can keep the packaging of your television to use in future.
Contents of the box Power cable Remote control
Note: Scart, HDMI, VGA and PHONO cables are not supplied with the device.
1.Insert the power cable into the power supply input located on the back panel of the LCD TV.
2.Insert the power cable plug supplied with the device into the mains socket.
Not 1: Your TV will switch to theSTANDBY mode in five minutes if there is no broadcast signal from the aerial.
Note 2: Your TV is equipped to operate with
TV buttons in case your remote is broken or the batteries are exhausted.
3. To power on your television,
press any numerical key orPR+ orPR- keys on the remote control.
For this process, you can also use the buttons on your TV. The picture will appear on the screen after a short while.
Note: If you are not going to use your television for a long time, unplug its power cable from the socket.
Initial power on and performing settings
To set up your television, read the sections on the TV controls and making the channel settings.
Open the lid of the battery compartment and make sure that you have placed the batteries in the correct direction. For this remote control,
Do not throw your old batteries into the fire, discard them in a dedicated waste area for this purpose.
Do not mix used batteries with new ones or different types of batteries together.
The performance of the remote control will be reduced at a distance of 8 meters from or at an angle of 30 degrees beyond the centre of the TV.
5 Your new television
Program Down/Up button
Menu button / Source selection button
Volume Level Down/Up
Stand by indicator
Bright light: TV is in
Dimmed light: TV is On
No light: Power Cable is not connected.
15Video input PHONO connector
Please see Technical Specifications Table on page 31 for the available external connections on your television.
• Please do not use the video PHONO and