Beko 26WLZ530HID User Manual
INTEGRATEDDIGITALHDREADY COLOUR TELEVISIONS
TABLE OF CONTENTS
9.8- Inserting the CI (Common Interface) card..........................................................
1 Important Information
LCD panels are produced with
After powering off, wipe the screen and the cabinet clean with a soft and dry cloth. We recommend that you do not use patented polishes or solvents on the screen or cabinet since they may cause damage.
The cold cathode fluorescent lamp found in your LCD screen contains a very small amount of mercury. Once your TV reaches the end of its useful life, please dispose of it in accordance with local government regulations or leave it at a recycling centre.
This television can receive and process all analogue and digital broadcasts. This television set has an integrated digital and analogue receiver. The digital receiver unit processes the signals coming from digital transmitters and converts them into superior sound and image quality. TV Guide (valid for digital broadcasts only) informs you about changes in the program list briefly and provides program lists of all digital broadcasts for a number of forthcoming days. You can display detailed information about each program by pressing a single button if this feature is supported by the broadcaster. This television has a comprehensive and user friendly menu configuration.
You will need an outdoor aerial to receive digital broadcasts. Contrary to the analogue broadcasts, all digital broadcasts may not have their own transmission frequency. Instead, various digital broadcasts channels are gathered in regional or national groups called bouquets. You can find current transmission data from teletexts of various broadcasters or from TV guide or from the internet.
•HD signals must be connected to the HDMI input or component (YPbPr) inputs. See page 8 for external connections.
•You should check your postcode to make sure that you are in freeview coverage area (www.freewiew.co.uk).
The supplied mains cable already has a mains plug fitted, however should you need to replace it at any time please refer to the appropriate wiring information below for your particular cable.
2 Features of your new television
We would like this product, which has been manufactured in modern facilities in accordance with total quality principles, to offer you the best performance. Therefore, we would like you to read this entire manual carefully before you use your product and keep it for future reference.
•High image and sound performance.
•CI slot input.
•Favourite channel list in digital mode (maximum 4 lists)
•Performing Digital and Analogue processes by a single menu.
•Updating feature for all system software through
•Wide angle of vision.
•Low energy consumption.
•AVL (Automatic Volume Limiting) feature.
•Programmable power on/off feature.
•Clearer pictures with the Digital Comb Filter.
•Sharpness feature in Colour Transitions (CTI)
•Sharpness feature and picture resolution (LTI) in
•Memory capacity up to 100 analogue channels.
•Memory capacity up to 400 digital channels.
•Infrared remote control equipped with all functions.
•Pausing and Zooming the picture
•Ability to watch NTSC broadcasts via Scart input.
•4:3, 16:9, 14:9 Letterbox, Subtitle and Panorama picture formats.
HDMI, the HDMI logo and
Manufactured under license from Dolby Laboratories.
3 Important Safety Instructions
This symbol is used to warn the user about the “dangerous voltage” contained inside the housing of the product that may create a risk of electrical shock.
This symbol is used to remind the user important usage and service instructions supplied with the TV.
1)Please READ the operating instructions before using
your TV for the first time. 2) Please observe the
instructions contained in the Operating Instructions.
3)Please consider all warnings.
4)MAKE SURE that all
power connections (extension cables and the connections between the TV components) have been made properly and
in accordance with the manufacturer’s instructions. Before making or changing the connections, power off the TV and unplug the mains connection plug.
5)If you have any doubts regarding the installation, operation or safety of the device, please REFER to the retailer.
6)BE CAREFUL with glass panels and covers on the TV. The screen glass may break and cause serious injuries if something hits it.
7)To ensure adequate ventilation, please leave a clearance area of at least 10 cm around the television. This clearance prevents the TV from overheating and
consequently causing damage.
•Using the TV in dusty environments should also be avoided.
•Never block the slots and openings by placing the TV on a bed, sofa, pillow or other similar surfaces.
•Never install the TV into closed places such as bookcases or cabinets unless adequate ventilation is provided.
8) DO NOT COVER the ventilation openings of
the TV with items such as newspapers, tablecloth,curtain, etc. Overheatingcauses damage and shortens the service life of the TV.
9) Your TV may be damaged
if you place it under direct sunshine or close to a heater. Please abstain from
using the product in very hot or humid locations or
in places where the temperature is likely to decrease below 5°C (41°F). DO NOT PLACE on or near the TV any hot objects or items with open flame such as candles or any night lamps. The high temperature can melt plastic parts and cause a fire.
10) Never operate your
TV close to water. Operating your TV, for example, near a bathtub, washbasin, kitchen washbasin,
washing basin, wet basement and swimming pool can cause fire or electric shock.
•Do not allow your TV to get wet. Never pour
any liquids onto the TV. Do not operate your TV if any solid
or liquid substance enters into it. This can cause electric shock and your TV may be damaged. Have it checked immediately by qualified personnel.
• Keep flammable materials and open flame sources (such as candles) away from
TV in order to avoid risk of fire.
11)DO NOT USE headphones at extremely
high volume levels since this may cause permanent loss of hearing.
12) Operate your TV only in
the 230 V 50Hz voltage range. Use the AC power cable supplied
with the product. If your TV is a grounded (Class
I) product, then it must be connected to a grounded socket.
•The socket into which you plug in the
AC power cable must be within easy reach.
•Unplug the TV in order to disconnect it from mains power.
Note: Do not use defective sockets. Make sure that the plug is firmly inserted into the socket. If the plug remains loose, then it can cause fire due to arcing. Refer to an electrician to have your socket replaced.
13)Make sure that the power cable is not stepped on and
that there is no bending at the plug sections, plug
heads and device output point.
14) Use only the
15) Use only or stands specifiedby the manufacturer or soldalong with the product.
Place your device on a level surface.
16) Unplug the power cable
during thunderstorms or when you will not use your TV for a long period of time.
17) Consult authorised service personnel for service
requirements. Never attempt to repair the TV yourself. Opening the cabinet can expose you to
dangerous voltages or other hazardous situations. Service is required in situations such as damage to the power cable
of the device or its plug, water spills or substances falling into the TV, the TV is subjected to rain or moisture, it does not operate normally or it is dropped.
18) Wipe the TV cabinet
clean with a soft and dry cloth. Wipe dust from the screen gently with a soft cloth. Stubborn stains can be cleaned with a
cloth slightly moistened
with soap and lukewarm water. Never use solvents such as thinner or gasoline for cleaning. Unplug the AC power cable from the socket when cleaning the TV. Otherwise, there is the risk of electric shock.
19)Do not dispose of the batteries in fire.
• Do not short circuit, dismantle or overheat
the batteries. There is the risk of explosion
if the batteries are not replaced correctly. Replace only with the same or equivalent type batteries.
20) Disposing of the exhausted batteries:
•Dispose of the exhausted
batteries in accordance with the local laws and regulations in
order to protect our environment.
21) Do not dispose of your TV with regular household waste. Observe local laws and regulations for disposal.
22)For stand fitting and removal please refer to loose leaf sheet inside TV carton.
Note 1: This is a Class A product. During operation, the device can cause radio interference. In this case the user may have to remedy this. Please contact your specialist dealer.
Note 2: Electromagnetic fields can cause temporary performance degradation. This can be distinguished as noise in the image.
Remove your television carefully from its box.
You can keep the packaging of your television to use in future.
Contents of the box
Power cable Remote control 2 batteries
Note: Scart, HDMI, VGA and PHONO cables are not supplied with the device.
1.Insert the power cable into the power supply input located on the back panel of the
2.Insert the power cable plug supplied with the tv into the mains socket.
Note: Your TV is equipped to operate with
TV buttons in case your R/C is broken or the batteries are exhausted.
3.Press the Standby on/off button located on the LCD TV , or
4.Press PR+ orPR- keys on the remote control. For this process,
you can also use the buttons on your TV. The picture will appear on the screen after a short while.
Note: If you are not going to use
your television for a long time, unplug its power cable from the socket.
To set up your television, read the sections on the TV controls and making the channel settings.
Open the lid of the battery compartment and make sure that you have placed the batteries in the correct direction. For this remote control,
Do not throw your old batteries into the fire, discard them in a dedicated waste area for this purpose.
Do not mix used batteries with new ones or different types of batteries together.
The performance of the remote control will be reduced at a distance of 8 meters from or at an angle of 30 degrees beyond the centre of the TV.
5 Your new television
Program Down/Up button
Menu button/Source selection button
Volume Level Down/Up
Stand by indicator
Bright light: TV is in
Dimmed light: TV is On
No light: Power Cable is not connected.
Component video input (Y)
Component audio input (L)
Audio input Phono connector
Component video input (Pb)
Component audio input (R)
Video input Phono connector
Component video input (Pr)
Sound input Phono connector
SPDIF Digital audio output
VGA (PC connection) input
Stereo Headphone socket
PC audio input
HDMI 1 input
HDMI 2 input
CI slot input
•Above drawing for external connections is representational. Their order and places on your
TV may be different.
•Please see Technical Specifications Table on page 31 for the available external connections on your television.
•Please do not use the video Phono and