Behringer DD600 User Manual

Size:
389.01 Kb
Download

DIGITAL DELAY DD600

Digital Stereo Delay/Echo Effects Pedal

Thank you for showing your confidence in us by purchasing the BEHRINGER DIGITAL DELAY DD600. This digital Delay effects pedal is designed to deliver 24-bithigh-resolutionstereo delay sounds comparable tostate-of-the-artstudio processors. Thanks to its parameter controls, you’ll have plenty of cool sounds at your disposal to handle every situation.

1. Controls

(1)Select the effect mode via the MODE switch (see table below).

(2)Use the D.TIME control tofine-tunethe delay time. The delay time describes how fast the signal repetitions will follow after the original signal. Depending on the selected mode,

you can adjust it between 1 ms and 2000 ms. In HOLD and TEMPO modes, D.TIME is disabled.

(3)The F.BACK (feedback) control adjusts the amount of signal repetitions.

In HOLD mode, F.BACK is disabled.

(4)LEVEL adjusts the effect level.

(5)Use the ¼" TS IN connector to plug in the instrument cable.

(3)(2)

(4)(1)

(9)

 

(8)

(5)

(7)(6)

(10)

(6)Use the ¼" TS TEMPO connector to connect an external foot switch.

Use the foot switch to tap in the song tempo (in TEMPO MODE).

(7)The ¼" TS OUT A connector sends a mono signal to your amp. In E/D mode, it sends the effect signal only.

(8)Use the PAN OUT connector and OUT A to acheive a full stereo delay effect. In E/D mode, it sends the dry signal only.

(9)The ON/BATT LED illuminates when the effect is activated. It also serves as a battery level indicator.

(10)Use the foot switch to activate/deactivate the effect. In HOLD mode, use the foot switch to start and stop the recording. The signal is recorded while holding down the foot switch. Playback begins immediately after releasing it.

 

MODE

Effect Description

 

D.Time

1

 

Short delay

 

1-50ms

 

 

2

DELAY

Short to medium delay

 

50-200ms

3

Medium to long delay

 

200-800ms

 

 

4

 

Long delay

 

800-2000ms

5

HOLD

Record and playback your performance

 

(Rec.time: max.2 s)

6

REVERSE

Signal is repeated in reverse

 

1000-2000ms

7

E/D

Stereo delay using OUT A and PAN OUT

 

1-400ms

8

 

Adds a quarter note

 

 

9

TEMPO

Adds an eighth note

 

D.TIME disabled.

10

Adds a dotted eighth note

 

Tap tempo via external foot switch

 

 

11

 

Add a triplet

 

 

 

 

 

 

 

DIGITAL DELAY DD600

Use the DC IN connection at the front of the unit to plug in a 9 V power supply (not included).

The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery, press the hinges with a ballpen and remove the pedal cover. Be careful not to scratch the unit.

The DD600 has no On/Off switch. It is operable as soon as you insert a plug into the IN connector. Disconnect the plug, if you don’t use the DD600. In doing so, you can extend the life time of the battery.

The SERIAL NUMBER is located on the underside.

In rare cases interferences of the normal function may appear by external influence (e.g. electrostatic discharge), as for example sound disturbances or malfunctions. If this occurs, please turn down the volume on subsequent amplifiers and disconnect the input connector briefly to restart the application.

2. Safety Instructions

Do not use near water, or install near heat sources. Use only authorized attachments/accessories. Do not service product yourself. Contact our qualified servicing personnel for servicing or repairs, especially when power supply cord or plug is damaged.

3. Warranty

Please register your new BEHRINGER equipment right after your purchase by visiting http://behringer.com and read the terms and conditions of our warranty carefully.

4. Specifications

In

 

Connector

1" TS, 500 kΩ

Tempo

 

Connector

1" TS, 500 kΩ

OUT A

 

Connector

1" TS, 500 kΩ

Power Supply

 

 

 

9 V , 100 mA regulated

BEHRINGER PSU-SB

 

 

 

 

 

USA/Canada

120 V~, 60 Hz

 

China, Korea

220 V~, 50/60 Hz

 

Europe/Australia

230 V~, 50 Hz

 

Japan

100 V~, 50 - 60 Hz

Power connector

2 mm DC jack,

 

center negative

Battery

9 V type 6LR61

Power consumption

70 mA

Physical/Weight

 

Dimensions

approx. 2 1/8 x 2 3/4 x 4 4/5"

(H x W x D)

approx. 54 x 70 x 123 mm

Weight

approx. 0.73 lbs / 0.33 kg

BEHRINGER is constantly striving to maintain the

highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may therefore differ from those listed or shown.

TECHNICAL SPECIFICATIONS AND APPEARANCES ARE SUBJECT TO CHANGE WITHOUT NOTICE AND ACCURACY IS NOT GUARANTEED. BEHRINGER IS PART OF THE MUSIC GROUP (MUSIC-GROUP.COM).ALL TRADEMARKS ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS. MUSIC GROUP ACCEPTS NO LIABILITY FOR ANY LOSS WHICH MAY BE SUFFERED BY ANY PERSON WHO RELIES EITHER WHOLLY OR IN PART UPON ANY DESCRIPTION, PHOTOGRAPH OR STATEMENT CONTAINED HEREIN. COLORS AND SPECIFICATIONS MAY VARY FROM ACTUAL PRODUCT. MUSIC GROUP PRODUCTS ARE SOLD THROUGH AUTHORIZED FULLFILLERS AND RESELLERS ONLY. FULLFILLERS AND RESELLERS ARE NOT AGENTS OF MUSIC GROUP AND HAVE ABSOLUTELY NO AUTHORITY TO BIND MUSIC GROUP BY ANY EXPRESS OR IMPLIED UNDERTAKING OR REPRESENTATION. THIS MANUAL IS COPYRIGHTED. NO PART OF THIS MANUAL MAY BE REPRODUCED OR TRANSMITTED IN ANY FORM OR BY ANY MEANS, ELECTRONIC OR MECHANICAL, INCLUDING PHOTOCOPYING AND RECORDING OF ANY KIND, FOR ANY PURPOSE, WITHOUT THE EXPRESS WRITTEN PERMISSION OF MUSIC GROUP IP LTD. ALL RIGHTS RESERVED. © 2012 MUSIC Group IP Ltd. Trident Chambers, Wickhams Cay, P.O. Box 146, Road Town, Tortola, British Virgin Islands