Behringer AB100 User Manual
INSTRUMENT/AMP SELECTOR AB100
Thank you for showing your confidence in us by purchasing the BEHRINGER ULTRA METAL UM300.
(1)IN 1: this ¼" TS jack is the first AB100 input. Plug in an instrument here (guitar, bass, etc.).
(2)OUT A: this ¼" TS jack is the first AB100 output. Plug in an amp or an effect here.
(3)OUT B/IN 2: this ¼" TS jack can be used as a second output or a second input, depending on the position of selector (4).
(4)The MODE selector adapts the AB100 to your system: If you play one instrument and two amps,
set MODE in the upper position to get one input for two outputs. In this case, connector (6) serves as a second output (OUT B). Otherwise, if you play two instruments and one amp, set MODE in the lower position to get two inputs for one output. In that case, connector (6) serves as a second input (IN 2).
(5)Use the A LEVEL button to set the volume of OUT A. The output is active when the green LED is lit.
(6)When MODE is in the upper position, use the B LEVEL button to set the volume of OUT B. The output is active when the red LED is lit.
(7)Use the footswitch to noiselessly and instantaneously toggle between two amps (MODE selector in the upper position) or two instruments (MODE selector in the lower position).
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery, press the hinges with a ballpen and remove the pedal cover. Be careful not to scratch the unit.
◊The AB100 has no on/off switch. As soon as you insert the jack into the in connector, the AB100 begins running. When not using the AB100, remove the jack from the
in connector. This extends the life of the battery.
The SERIAL NUMBER is located at the bottom of the unit.
INSTRUMENT/AMP SELECTOR AB100
2. Safety Instructions
Do not use near water, or install near heat sources. Use only authorized attachments/accessories. Do not service product yourself. Contact our qualified servicing personnel for servicing or repairs, especially when power supply cord or plug is damaged.
Please register your new BEHRINGER equipment right after your purchase by visiting http://behringer.com and read the terms and conditions of our warranty carefully.
In 2/Out B
Impedance In 2
Impedance Out B
9 V, 100 mA DC regulated
220 VAC adaptor China
230 VAC adaptor Europe
100 VAC adaptor Japan
240 VAC adaptor Australia
240 VAC adaptor UK
115 VAC adaptor USA
2 mm DC jack,
9 V type 6LR61
approx. 2 1⁄8 x 2 3⁄4 x 4 4⁄5"
(H x W x D)
approx. 54 x 70 x 123 mm
approx. 0.73 lbs / 0.33 kg
BEHRINGER is constantly striving to maintain the
highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may therefore differ from those listed or shown.
TECHNICAL SPECIFICATIONS AND APPEARANCES ARE SUBJECT TO CHANGE WITHOUT NOTICE AND ACCURACY IS NOT GUARANTEED. BEHRINGER IS PART OF THE MUSIC GROUP