B&B Electronics EIR610 Series User Manual

Size:
120.68 Kb
Download

Quick Start Guide

Elinx Managed Ethernet Switch

EIR610 Series

1

Items Included

o Ethernet Switch

o Console Cable(RS-232RJ-45toDB-9)o CD with Support Manual

o This Quick Start Guide

o Panel Mount Bracket

2

Default Settings

o IP Address: 192.168.16.1

o Subnet Mask: 255.255.255.0o Gateway: 192.168.16.254

o User Name: root, Password: root

3

LED Chart

 

 

 

 

 

LED

 

Status

Meaning

PWR

 

Green

The Switch is powered on

 

Off

The Switch is powered off

 

 

 

PWR1

 

Green

Power Source 1 is available

 

Off

Power Source 1 is unavailable

 

 

 

PWR2

 

Green

Power Source 2 is available

 

Off

Power source 2 is unavailable

 

 

 

Fault

 

Red

Power or Port failure

 

Off

Normal Operation

 

 

 

 

 

 

Green

The Switch is the master of a redundant

R.M

 

ring (X-Ring)

 

 

 

Off

The Switch is not the master of a

 

 

 

 

 

 

redundant ring.

 

 

 

 

LINK/ACT

 

Green

SFP Port is linked

P7/9/10*

 

Blinking

Data is being transmitted or received

SFP

 

Off

Not connected to the network

Port

 

T

Green

Port is linked

 

T

Blinking

Data is being transmitted or received

7/9/10*

 

T

Off

Not connected to the network

RJ-45

 

B

Green

Operating at 1000M

 

 

B

Off

Disconnected or below 1000M

 

 

T

Green

Connected to the network

 

 

T

Blinking

Data is being transmitted or received

P1-6/8*

 

T

Off

Not connected to the network

 

B

Yellow

Operating in full-duplex

 

 

 

 

B

Blinking

Data collision

 

 

B

Off

Half-duplexor not connected

*Note

 

EIR610-3SFP:Ports1-6and 8 are 10/100RJ-45,Ports

 

7, 9, and 10 are 100/1000 RJ-45or SFP.

 

 

 

 

 

 

 

EIR610 Series-5107qsg

4

Hardware Installation

oRecord the switch’s MAC Address in the space provided. The MAC Address is printed on the product label. NOTE: Provide the MAC Address to your

Network Administrator. The Network Administrator

should provide an IP Address, Subnet Mask, and Gateway.

oSelect a mounting location and install with the attached DIN rail clip or included panel mount kit.

o Connect power to the switcho 12 to 48 VDC

oRedundant inputs are available with fault contacts.

NOTE: The installation of an SFP Module disables the associated RJ-45Port.

5

Log into the Switch

 

o These instructions are for Web based management. Refer to the User’s Manual for instructions concerning console management.

oConnect a switch port to a stand alone PC. Change the PC’s network IP Address to allow it to connect to the

switch (ex: 192.168.16.2). Use the default subnet mask and gateway.

oLaunch the PC’s web browser and navigate to the switch by typing the switch’s IP Address in the browser address window.

oNavigate the web page by expanding the folders on the left side of the web page.

International Headquarters: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA815-433-5100Fax433-5104www.bb-elec.com orders@bb-elec.com support@bb-elec.com

European Headquarters: Westlink Commercial Park Oranmore Co. Galway Ireland

+353 91 792444 Fax +353 91 792445 www.bb-europe.comorders@bb-europe.comsupport@bb-europe.com

6

IP Configuration

o Expand the “system tree” and select IP configuration.

oEnter the IP Address, Subnet Mask, and Gateway provided by your Network Administrator.

o Save changes.

o Disconnect the stand alone PC and connect the switch to the network.

o Inform your Network Administrator that the IP Address has been changed.

oNOTE: The User Manual contains instructions for assigning the IP Address from a DHCP Server and allowing the switch to be a DHCP Server.

 

EIR610 Series-5107qsg

7

User Name and Password

 

 

oThis step should be accomplished by the Network Administrator.

o Log onto the switch from a Network PC.

oExpand the “System Tree” and select user authentication..

oEnter the new User Name and Password. Record this information in the space provided below. File this

document for future reference. o Click the Apply button.

USER NAME: ______________________________________

PASSWORD:_______________________________________

MAC ADDRESS: ____________________________________

IP ADDRESS: _______________________________________

Basic Configuration is complete. A comprehensive Manual is contained on the CD ROM. Refer to this manual to configure the advanced features of this switch.

International Headquarters: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA815-433-5100Fax433-5104www.bb-elec.com orders@bb-elec.com support@bb-elec.com

European Headquarters: Westlink Commercial Park Oranmore Co. Galway Ireland

+353 91 792444 Fax +353 91 792445 www.bb-europe.comorders@bb-europe.comsupport@bb-europe.com