B&B Electronics EIR510 Series User Manual

Size:
116.83 Kb
Download

Quick Start Guide

Elinx Managed Ethernet Switch

EIR510 Series

1

Items Included

 

o Ethernet Switch

o Console Cable(RS-232RJ-45toDB-9)o CD with Support Manual

o This Quick Start Guide

o Panel Mount Bracket

2

Default Settings

o IP Address: 192.168.16.1

o Subnet Mask: 255.255.255.0o Gateway: 192.168.16.254

o User Name: root, Password: root

3

 

 

 

LED Chart

 

 

 

 

 

 

 

 

 

 

 

LED

 

Status

Meaning

 

PWR

 

Green

The Switch is powered on

 

 

Off

The Switch is powered off

 

 

 

 

PWR1

Green

Power Source 1 is available

 

Off

Power Source 1 is unavailable

 

 

 

 

PWR2

Green

Power Source 2 is available

 

Off

Power source 2 is unavailable

 

 

 

 

Fault

 

Orange

A power or port failure has occurred

 

 

Off

Normal Operation

 

 

 

 

 

 

Green

The Switch is the master of a redundant

 

R.M

 

ring (X-Ring)

 

 

 

 

 

Off

The Switch is not the master of a

 

 

 

 

 

 

redundant ring.

 

 

 

 

 

LINK/ACT

Green

The port is linked

 

Blinking

Data is being transmitted or received

 

(P9/P10)

 

Off

Not connected to the network

 

 

 

 

 

Top

Green

Connected to the network

 

 

Top

Blinking

Transmitting or receiving

 

P1-8

Top

Off

Not connected to the network

 

Bottom

Orange

Operating at full-duplex

 

 

 

 

Bottom

Blinking

Collision

 

 

Bottom

Off

Half-duplexor not connected

 

EIR510 Series-5107qsg

 

 

5

Log into the Switch

 

 

oThese instructions are for Web based management. Refer to the User’s Manual for instructions concerning console management.

oConnect a stand alone PC to a port on the switch. Change the PC’s network IP Address to allow it to connect to the switch (ex: 192.168.16.2). Use the

default subnet mask and gateway.

o Launch the PC’s web browser and navigate to the switch by typing the switch’s IP address in the browser address window.

oNavigate the web page by expanding the folders on the left side of the web page.

4

Hardware Installation

 

o Record the switch’s MAC Address in the space provided.Provide the MAC Address to your Network

Administrator. The Network Administrator will provide an IP Address, Subnet Mask and Gateway.

oSelect a mounting location and install with the attached DIN rail clip or included panel mount kit.

o Connect power to the switcho 24 to 48 VDC

oRedundant inputs are available with fault contacts.

International Headquarters: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA815-433-5100Fax433-5104www.bb-elec.com orders@bb-elec.com support@bb-elec.com

European Headquarters: Westlink Commercial Park Oranmore Co. Galway Ireland

+353 91 792444 Fax +353 91 792445 www.bb-europe.comorders@bb-europe.comsupport@bb-europe.com

6

IP Configuration

o Expand the “system tree” and select IP configuration.

oEnter the IP Address, Subnet Mask, and Gateway provided by your Network Administrator.

o Save the changes.

o Disconnect the stand alone PC from the switch and connect the switch to the network.

o Inform the Network Administrator that the IP Address has been changed.

oNOTE: The User Manual contains instructions for configuring the IP Address from a DHCP Server and to allow the switch to act as a DHCP Server.

EIR510 Series-5107qsg

7

User Name and Password

 

 

oThis step should be performed by the Network Administrator.

oLog onto the switch from a PC connected to the network.

oExpand the “System Tree” and select user authentication..

oEnter the new User Name and Password. Record this information in the space provided below. File this

document for future reference. o Click the Apply button.

USER NAME: ______________________________________

PASSWORD:_______________________________________

MAC ADDRESS: ____________________________________

IP ADDRESS: _______________________________________

Basic Configuration is complete. A comprehensive Manual is contained on the CD ROM. Refer to this manual to configure the advanced features of this switch.

International Headquarters: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA815-433-5100Fax433-5104www.bb-elec.com orders@bb-elec.com support@bb-elec.com

European Headquarters: Westlink Commercial Park Oranmore Co. Galway Ireland

+353 91 792444 Fax +353 91 792445 www.bb-europe.comorders@bb-europe.comsupport@bb-europe.com