B&B Electronics EIR508 Series User Manual

Size:
125.51 Kb
Download

EIR508 Series-5107qsg

Quick Start Guide

3

DIP Switch Settings

 

 

 

Elinx Managed Ethernet Switch

EIR508 Series

1

Items Included

o Ethernet Switch

o CD with Support Manualo This Quick Start Guideo Panel Mount Bracket

Pos

 

 

Status

 

Description

1

 

 

OFF

 

Disable port 1 Alarm

 

 

ON

 

Enable port 1 Alarm

 

 

 

 

(If port 1 link fails, the fault LED will light)

 

 

 

 

 

2

 

 

OFF

 

Disable port 2 Alarm

 

 

ON

 

Enable port 2 Alarm

 

 

 

 

(If port 2 link fails, the fault LED will light)

 

 

 

 

 

3

 

 

OFF

 

Disable port 3 Alarm

 

 

ON

 

Enable port 3 Alarm

 

 

 

 

(If port 3 link fails, the fault LED will light)

 

 

 

 

 

4

 

 

OFF

 

Disable port 4 Alarm

 

 

ON

 

Enable port 4 Alarm

 

 

 

 

(If port 4 link fails, the fault LED will light)

 

 

 

 

 

5

 

 

OFF

 

Disable port 5 Alarm

 

 

ON

 

Enable port 5 Alarm

 

 

 

 

(If port 5 link fails, the fault LED will light)

 

 

 

 

 

6

 

 

OFF

 

Disable port 6 Alarm

 

 

 

 

 

 

 

ON

 

Enable port 6 Alarm

 

 

 

 

 

 

 

 

(If port 6 link fails, the fault LED will light)

 

 

 

 

 

7

 

 

OFF

 

Disable port 7 Alarm

 

 

ON

 

Enable port 7 Alarm.

 

 

 

 

(If port 7 link fails, the fault LED will light)

 

 

 

 

 

8

 

 

OFF

 

Disable port 8 Alarm

 

 

ON

 

Enable port 8 Alarm

 

 

 

 

(If port 8 link fails, the fault LED will light)

 

 

 

 

 

9

 

 

OFF

 

Disable the ring master function.

 

 

ON

 

Enable the switch as the ring master

 

 

 

 

in the redundant ring group.

 

 

 

 

 

2

Default Settings

o IP Address: 192.168.16.1

o Subnet Mask: 255.255.255.0o Gateway: 192.168.16.254

o User Name: root, Password: root

4

 

 

 

LED Chart

 

 

 

 

 

 

 

 

 

 

 

 

 

 

LED

Status

 

Meaning

 

 

Power

Green

 

The Switch is powered on

 

 

Off

 

The Switch is powered off

 

 

 

 

 

 

Power 1

Green

 

Power Source 1 is available

 

 

Off

 

Power Source 1 is unavailable

 

 

 

 

 

 

Power 2

Green

 

Power Source 1 is available

 

 

Off

 

Power Source 2 is unavailable

 

 

 

 

 

 

Fault

Yellow

 

Power Source failure or Port Failure

 

 

Off

 

Normal Operation

 

 

 

 

 

 

R.M.

Green

 

Ring Master (Master of a redundant ring)

 

 

Off

 

The switch is not a Ring Master

 

 

 

 

 

 

LNK/ACT

Green

 

The port is linked

 

 

Blinking

 

The port is receiving or transmitting packets

 

 

Ports 7 & 8

 

 

 

Off

 

No device attached

 

 

 

 

 

 

FDX/COL

Yellow

 

Full Duplex Mode

 

 

Blinking

 

Data Collision

 

 

Ports 7 & 8

 

 

 

Off

 

Half Duplex Mode

 

 

 

 

 

 

10/100 Ports

Green

 

 

 

 

Yellow

 

 

 

 

 

 

 

 

 

 

 

 

 

5

 

 

Hardware Installation

 

 

 

 

 

 

 

 

 

oRecord the switch’s MAC Address in the space provided. The MAC Address is printed on the product

label. Provide the MAC Address to your Network

Administrator. The Network Administrator should provide an IP Address, Subnet Mask, and Gateway.

oSelect a mounting location and install with the attached DIN rail clip or included panel mount kit.

o Connect power to the switcho 12 to 48 VDC

oRedundant DC input is available with fault contacts.

International Headquarters: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA815-433-5100Fax433-5104www.bb-elec.com orders@bb-elec.com support@bb-elec.com

European Headquarters: Westlink Commercial Park Oranmore Co. Galway Ireland

+353 91 792444 Fax +353 91 792445 www.bb-europe.comorders@bb-europe.comsupport@bb-europe.com

6

Log into the Switch

 

 

oConnect a stand alone PC to a port on the switch. Change the PC’s network IP Address to allow it to connect to the switch (ex: 192.168.16.2). Use the default subnet mask and gateway.

o Launch the PC’s web browser and navigate to the switch by typing the switch’s IP address in the browser address window.

oNavigate the web page by clicking on the links located on the top of the web page.

7

IP Configuration

 

oClick on the IP Configuration link at the top of the web page.

oEnter the IP Address, Subnet Mask, and Gateway provided by your Network Administrator.

o Save changes

o Disconnect the stand alone PC and connect the switch to the Network.

oInform your Network Administrator that the IP Address has been changed.

oNOTE: The User Manual contains instructions for assigning the IP Address from a DHCP Server.

 

EIR508 Series-5107qsg

8

User Name and Password

 

 

o This step should be accomplished by your Network Administrator.

o Log onto the switch from a network PC.

o Click on the Security Manager link on the top of the web page.

o Enter the new User Name and Password. Record this information in the space provided below. File this document for future reference.

o Click the Apply button.

oClick the “Save Configuration” link at the top of the web page.

USER NAME: ______________________________________

PASSWORD:_______________________________________

MAC ADDRESS: ____________________________________

IP ADDRESS:_______________________________________

Basic Configuration is complete. A comprehensive Manual is contained on the CD ROM. Refer to this manual to configure the advanced features of this switch.

International Headquarters: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA815-433-5100Fax433-5104www.bb-elec.com orders@bb-elec.com support@bb-elec.com

European Headquarters: Westlink Commercial Park Oranmore Co. Galway Ireland

+353 91 792444 Fax +353 91 792445 www.bb-europe.comorders@bb-europe.comsupport@bb-europe.com