B&B Electronics EIR505 Series User Manual

Size:
120.37 Kb
Download

Quick Start Guide

Elinx Managed Ethernet Switch

EIR505 Series

1

Items Included

 

o Ethernet Switch

o CD with Support Manualo This Quick Start Guideo Panel Mount Bracket

2

Default Settings

o IP Address: 192.168.16.1

o Subnet Mask: 255.255.255.0o Gateway: 192.168.15.254

o User Name: root, Password: root

EIR505 Series-5107qsg

3

DIP Switch Settings

 

Pos

 

 

Status

 

Description

1

 

 

OFF

 

Disable port 1 Alarm

 

 

ON

 

Enable port 1 Alarm

 

 

 

 

(If port 1 link fails, the fault LED will light)

 

 

 

 

 

2

 

 

OFF

 

Disable port 2 Alarm

 

 

ON

 

Enable port 2 Alarm

 

 

 

 

(If port 2 link fails, the fault LED will light)

 

 

 

 

 

3

 

 

OFF

 

Disable port 3 Alarm

 

 

ON

 

Enable port 3 Alarm

 

 

 

 

(If port 3 link fails, the fault LED will light)

 

 

 

 

 

4

 

 

OFF

 

Disable port 4 Alarm

 

 

ON

 

Enable port 4 Alarm

 

 

 

 

(If port 4 link fails, the fault LED will light)

 

 

 

 

 

5

 

 

OFF

 

Disable port 5 Alarm

 

 

ON

 

Enable port 5 Alarm

 

 

 

 

(If port 5 link fails, the fault LED will light)

 

 

 

 

 

6

 

 

OFF

 

Disable the ring master function

 

 

 

 

 

 

 

ON

 

Enable the switch as the ring master

 

 

 

 

 

 

 

 

in the redundant ring group.

 

 

 

 

 

4

LED Chart

 

LED

Status

 

Meaning

Power

Green

 

The switch is powered on

Off

 

The switch is powered off

 

 

R.M.

Green

 

Ring Master (Master of a Redundant Ring)

(Ring Master)

Off

 

The switch is not a Ring Master

Power 1

Green

 

Power Source 1 is available

Off

 

Power Source 1 is unavailable

 

 

Power 2

Green

 

Power Source 2 is available

Off

 

Power Source 2 is unavailable

 

 

Fault

Yellow

 

Power Source Failure or Port Failure

Off

 

Normal Operation

 

 

Link/ACT

Green

 

The port is linked

Blinking

 

The port is receiving or transmitting packets

Port 5

 

Off

 

No device attached

 

 

FDX/COL

Yellow

 

Full Duplex Mode

Blinking

 

Data Collision

Port 5

 

Off

 

Half Duplex Mode

 

 

5

Hardware Installation

 

 

oRecord the switch’s MAC Address in the space provided. The MAC Address is printed on the product

label. Provide the MAC Address to your Network

Administrator. The Network Administrator should provide an IP Address, Subnet Mask, and Gateway.

oSelect a mounting location and install with the attached DIN rail clip or included panel mount kit.

o Connect power to the switcho 12 to 48 VDC

oRedundant DC input is available with fault contacts.

International Headquarters: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA815-433-5100Fax433-5104www.bb-elec.com orders@bb-elec.com support@bb-elec.com

European Headquarters: Westlink Commercial Park Oranmore Co. Galway Ireland

+353 91 792444 Fax +353 91 792445 www.bb-europe.comorders@bb-europe.comsupport@bb-europe.com

6

Log into the Switch

 

 

oConnect a stand alone PC to a port on the switch. Change the PC’s network IP Address to allow it to connect to the switch (ex: 192.168.16.2). Use the

default subnet mask and gateway.

o Launch to PC’s web browser and navigate to the switch by typing the switch’s IP address in the browser address window.

oNavigate the web page by clicking on the links located on the top of the web page.

7

IP Configuration

 

oClick on the IP Configuration link on the top of the web page.

o Enter the IP Address, Subnet Mask, and Gateway provided by your Network Administrator.

o Save changes.

oDisconnect the stand alone PC and connect the switch to the network.

oInform your Network Administrator that the switch’s IP Address has been changed.

oNOTE: The User Manual contains instructions for assigning the IP Address from a DHCP Server.

EIR505 Series-5107qsg

8

User Name and Password

 

 

oThis step should be accomplished by your Network Administrator.

o Log onto the switch from a network PC.

oClick on the Security Manager link on the top of the web page.

o Enter the new User Name and Password. Record this information in the space provided below. File this document for future reference.

o Click the Apply button.

oClick the “Save Configuration” link at the top of the web page.

USER NAME: ______________________________________

PASSWORD:_______________________________________

MAC ADDRESS: ____________________________________

IP ADDRESS: _______________________________________

Basic Configuration is complete. A comprehensive Manual is contained on the CD ROM. Refer to this manual to configure the advanced features of this switch.

International Headquarters: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA815-433-5100Fax433-5104www.bb-elec.com orders@bb-elec.com support@bb-elec.com

European Headquarters: Westlink Commercial Park Oranmore Co. Galway Ireland

+353 91 792444 Fax +353 91 792445 www.bb-europe.comorders@bb-europe.comsupport@bb-europe.com