B&B Electronics Digi TS W Family User Manual

Size:
1.19 Mb
Download

What you will need

power supply may be either

supply shown here

Quick Start Guide

Digi TS W Family

PortServer TS 4 W

 

shown

Digi One TS W, PortServer TS 2 W, PortServer TS 4 W

Ethernet cable not included

Connect serial device

Software &

Documentation

PN:(1P) 90000305 B

INSTALL

RUN

Software &

WIZARD

Documentation

 

Insert CD

If you have a UNIX system and it does not use an auto-mounter,you will need to manually mount the CD. See the back of this guide for UNIX specific instructions.

 

Connect

Connect

power

Ethernet

supply

cable

 

Follow wizard

 

Congratulations!

REBOOT

The Wireless device is

configured. Go to the User

 

Guide on the CD for more

 

information.

Disconnect

Disconnect

Re-connect

power

Ethernet

power supply

supply

cable

 

© Digi International Inc., 2004.

visit us at www.digi.com

Digi, Digi International, the Digi logo, the Digi Connectware logo, the Making Device Networking Easy logo, Digi One TS, PortServer TS W,

and RealPort are trademarks or registered trademarks of Digi International, Inc. in the United States and other countries worldwide.

 

All other trademarks are the property of their respective owners.

 

Accessing the CD from a UNIX System

Insert CD in system CD drive

1

UNIX

Software &

 

Documentation

2

Determine your CD device

Common names for CD-ROMdevices:

 

NAME

EXAMPLE

 

 

/dev/cdrom

/dev/cdrom

 

 

/dev/cdrom/cdromn

/dev/cdrom/cdrom1

 

 

/dev/cdn

/dev/cd0

 

 

/dev/dsk/cktmdn

/dev/c1t2d0

 

To list descriptions of devices: AIX: lscfg

HPUX: - Make sure you have administrator privileges and your PATH includes /usr/sbin

ioscan -funCdisk

Solaris: Most Solaris systems use an auto-mounter.See the man page on vold:man vold

If your system auto mounts the CD, skip to step 5. Auto Mount programs may use the volume information to define a mount point. If the CD volume label is "Digi" then the mount point may be /cdrom/digi

3

Identify the mount-directory.

Some common pre-existingmount points:

/mnt/cdrom /cdrom

Or create your own: mkdir /mnt/mycdrom

HPUX - Check to see if pfs is running ps -ef | grep pfs

If not, start the daemons: pfs_mountd&; pfsd&

4

Mount the CD by entering one of the commands from the following table:

 

Operating

Command

5

 

 

 

 

 

System

 

 

 

 

 

 

AIX

mount -r-vcdrfs devicemount-directory

 

 

 

 

*HPUX

do not use mount, it will not operate correctly

 

 

 

 

pfs_mount device mount-directory

 

 

 

 

 

See man pages for pfs andpfs_mount for more

 

 

 

 

 

information.

 

 

 

 

 

Linux

mount device mount-directory

 

 

 

 

SCO

mount -r-Fcdfs devicemount-directory

 

 

 

 

UnixWare

 

 

 

 

 

 

SCO

mount -r-fISO9660 devicemount-directory

 

 

 

 

OpenServer

 

 

 

 

 

 

Solaris

mount -Fhsfs devicemount-directory

 

 

 

 

 

 

 

 

(Intel

Most systems use an auto-mounter.See the man page

 

 

 

 

& SPARC)

on vold: man vold

 

 

 

device is the path to the device file assigned to the cdrom drive,mount-directory is the directory where the Digi CD is mounted

*HPUX When finished, leave the CD directory and pfs_umount cd

pfs_umount mount-directory

(If you inadvertenly use umount instead ofpfs_umount, kill the pfs daemons to remove theCD-ROM.)

Navigate to mounted CD directory, enter: ./setup

If you see DISPLAY permission errors when running the CD, you may want to verify your DISPLAY variable is set.

To set the DISPLAY variable:

DISPLAY=localhost:0.0; export DISPLAY

AND/OR

xhost +localhost