Barco MFGD 3220 D User Manual
Size:
910.12 Kb
Download

B410024 / 02 November2002

© 2002 BARCO NV. All rights reserved

BarcoView

Theodoor Sevenslaan 106

8500 Kortrijk, Belgium

Phone: +32(0)56 23 32 44

Fax: +32(0)56 23 33 74

E-mail:sales.medical@barco.com

http://www.barcoview.com

BarcoView Inc

3059 Premiere Parkway

Duluth, Georgia, 30097,USA

Phone: +1 678 475 8000

Fax: +1 678 475 8100

E-mail:sales.medical@barco.com

http://www.barcoview.com

BarcoView LTD

16F-1,Cheng Loong Plaza 33, Min Sheng Road Section 1, Pan Chiao, Taipei Hsien, Taiwan, R.O.C.

Phone: +886 2 2957 8357

Fax: +886 2 2957 4080

MFGD 3220 D

User Manual

SAFETY INSTRUCTIONS

Read the safety and operating instructions before operating the apparatus.

Retain safety and operating instructions for future reference.

Adhere to all warnings on the apparatus and in the operating instructions manual.

Follow all instructions for operation and use.

•This apparatus conforms to:

CE, IEC 60950, UL 60950, CAN/ CSA C22.2 No. 60950 (cUL)

• FCC notice

This equipment has been tested and found to comply with the limits of a class A digital device, pursuant to

Part 15 of the FCC rules.

These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Power connection

Warning: This apparatus must be earthed!

Power requirements: The apparatus must be powered using the 12 VDC power supply that is supplied with the apparatus.

The 12 VDC power supply must be powered by the AC mains voltage.

Do not overload wall outlets and extension cords as this may result in fire or electric shock.

Mains lead protection (U.S.:

Power cord): Supply cords should be routed so that they are not likely to be walked upon or pinched by items placed upon or against them, paying particular attention to cords at plugs and receptacles.

Water and moisture

Never expose the apparatustorainormoisture.

Never use the apparatus near water - e.g. near a bathtub, washbasin, swimming pool, kitchen sink, laundry tub or in a wet basement.

Ventilation

• Do not cover or block the ventilation openings in the cover of the set. When installing the apparatus in a cupboard or another closed location, heed the necessary space between the set and the sides of the cupboard.

Installation

• Place the apparatus on a flat, solid and stable surface that can bear the weight of at least 3 displays. If you use an unstable cart or stand, the set may fall, causing serious injury to a child or adult, and serious damage to the equipment.

MFGD 3220D User's Guide

4

CONTENTS

 

1. Overview .........................................................................................................

7

1.1 Introduction ...............................................................................................

7

1.2

Package contents .....................................................................................

8

1.3

Controls and connectors ...........................................................................

8

2. Installation .....................................................................................................

10

2.1

Precautions .............................................................................................

10

2.2. Before installing the display ...................................................................

10

2.3

Portrait or landscape position ..................................................................

11

2.4

Connecting the signals ...........................................................................

12

To connect the power: ..............................................................................

12

To connect the video & sync signals: .......................................................

12

2.5. Routing the signal cables .......................................................................

13

2.6

Tilt and swivel positioning .......................................................................

14

2.7

Starting up ...............................................................................................

14

3. Controls .........................................................................................................

15

3.1

Stand-by switching ..................................................................................

15

3.2

Brightness control ...................................................................................

15

4. Maintenance ..................................................................................................

16

Panel ............................................................................................................

16

Cabinet .........................................................................................................

16

Removing dust from the rear of the glass panel ...........................................

16

5. Troubleshooting .............................................................................................

17

Pixel Faults ...................................................................................................

17

6. Technical specifications .................................................................................

18

MFGD 3220D User's Guide

5

MFGD 3220D User's Guide

6

1. OVERVIEW

1.1 Introduction

 

The MFGD 3220D, BARCO’s 21” 3 megapixel

 

greyscale LCD display, guarantees perfect image

 

quality in medical imaging applications.

 

 

The display combines a TFT (thin film transistor)

 

liquid crystal display panel structure and a built-in

 

backlight with inverter for a better picture quality. It

 

is designed to meet the users' needs for

 

 

performance, consistency, and outstanding image

 

quality through a streamlined development

 

 

process.

 

 

The display can be used in portrait or landscape

 

version, simply by turning the panel. The tilt &

 

 

swivel foot allows ideal positioning of the panel, in

 

height and viewing angle.

 

 

The image brightness can be adjusted by means

 

of a control wheel on the display. Other image

 

 

parameters can be adjusted by means of external

 

software, like MediCal® Pro.

 

I-Guard

I-GUARD®is Barco’spatent-pending,built-in

 

 

calibration device, continuously maintaining image

 

quality. With I-GUARD®,QA checks no longer

 

 

need to disturb normal radiology activities, as they

 

can be performed while applications are running.

 

I-GUARD®allows radiologists or QA

 

 

administrators to calibrate their viewing stations or

 

adjust the panel’s curve to DICOM standards

 

 

without administrator intervention.

 

MediCal Pro

In combination with Barco’s MediCal ® Pro

 

 

management and calibration software package,

 

 

Coronis offers a truly intervention-freedisplay

 

 

system, making it possible to perform QA checks

 

from one central server at any time, thereby

 

 

reducing lifecycle cost.

 

Multi-scancapabilities

The optimum and recommended resolution is

 

 

2048 x 1536 or 1536 x 2048 at 60 Hz.

 

 

The MFGD 3220D display will also display most

 

of the computer boot modes.

 

 

BARCO's BarcoMed 3MP2FH imaging board is

 

the best choice to drive the MFGD 3220D display.

 

MFGD 3220D User's Guide

7

1.2 Package contents

The package should include the following items, please check. If some of the items are missing, please contact the reseller you have purchased the unit from.

-The MFGD 3220D display

-12V DC power supply

-European power cord

-American power cord

-Video cable

-This user manual

1.3Controls and connectors

(2)

(3)

(1)

(4)

(5)

(6)

MFGD 3220D User's Guide

8

(1)Power LED

-The LED is off when the display is off.

-The LED is green when the display is on. Note: This function can be switched off by software.

-The LED is blinking green when the display is in Suspend power-savingmode.

-The LED is orange when the display is in Stand-bypower-savingmode.

(2)Control wheel for stand-byswitching and luminance control

(3)USB-downstreamconnector

(4)USB-upstreamconnector

(5)DVI (video and data) input

(6)12V DC power input

MFGD 3220D User's Guide

9

2. INSTALLATION

2.1 Precautions

Keep your original packaging. It is designed for this display and is the ideal protection during transport.

Avoid reflections in the flat panel to reduce eye strain.

Place the display on a strong and stable table or desk.

Keep the display away from heat sources and provide enough ventilation in case it is built in a rack or console.

Make sure the computer is switched off before connecting the signals.

Do not block or cover the openings in the external power supply block. Also, do not turn the power supply upside down or at its side. Doing so would cause overheating of the power supply.

2.2.Before installing the display

Important:

In the factory, the height-positioningsystem in the display foot is blocked with a strap to prevent damage during transportation.

Before installing the display, you must remove this strap.

To remove the strap:

1Position the display with its rear side facing you.

2If the foot cover is mounted on the foot, lift up the 2 clips of the foot cover to release the cover from the foot.

3Pull the lower side of the cover towards you and simultaneously slide the cover downward.

MFGD 3220D User's Guide

10