Barco MCFD 1219 - MCFD 1219 TS User Manual
Size:
724.23 Kb
Download

B4100528 / 03

November2005

MFCD 1219 - MFCD 1219 TS

Installation & User Manual

SAFETY INSTRUCTIONS

Read the safety and operating instructions before operating the apparatus.

Retain safety and operating instructions for future reference.

Adhere to all warnings on the apparatus and in the operating instructions manual.

Follow all instructions for operation and use.

•This apparatus conforms to: UL60950, cUL60950,

IEC60950, CE

• FCC notice

This equipment has been tested and found to comply with the limits of a class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case

the user will be required to correct the interference at his own expense.

• This Class B digital apparatus complies with

Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003du Canada.

Power connection

Warning: This apparatus must be earthed!

Power requirements: connect the apparatus to an AC voltage as indicated at its back. Using a lower voltage, the apparatus will not be able to operate. Using a higher voltage may damage the apparatus.

If you are not sure of the type of power supplied, consult the power company.

Do not overload wall outlets and extension cords as this may result in fire or electric shock.

Mains lead protection (U.S.:

Power cord): Supply cords should be routed so that they are not likely to be walked upon or pinched by items placed upon or against them, paying particular attention to cords at plugs and receptacles.

Adapter manufacturer: Linearity Electronics Co. Ltd., Model: LAD6019AB5, complies with UL Certified Class 2 Power adapter or

UL Certified ITE Power adapter with LPS, and

Suitable ratings.

Power Supply Cord - Listed,

Detachable, maximum 4.5m (14.76 ft.) long; rated minimum 125 V, 2.5 A, Type SPT-1flexible cord; one end terminates in parallel blade

(NEMA 5-20P)groundingtype attachment plug, other end in appliance coupler.

Water and moisture

Never expose the apparatustorainormoisture.

Never use the apparatus near water - e.g. near a bathtub, washbasin, swimming pool, kitchen sink, laundry tub or in a wet basement.

Ventilation

• Do not cover or block the ventilation openings in the cover of the set. When installing the apparatus in a cupboard or another closed location, heed the necessary space between the set and the sides of the cupboard.

Installation

• Place the apparatus on a flat, solid and stable surface that can bear the weight of at least 3 monitors. If you use an unstable cart or stand, the set may fall, causing serious injury to a child or adult, and serious damage to the equipment.

© 2005 BARCO nv. Allrights reserved.

CONTENTS

 

1. Overview .......................................................................................................

5

1.1

Introduction .............................................................................................

5

Multi-scan capabilities ...............................................................................

5

Touch panel ...............................................................................................

6

1.2

Package contents ...................................................................................

6

Power Saving .............................................................................................

6

1.3 Controls and connectors ............................................................................

7

2. Installation ....................................................................................................

8

2.1

Precautions .............................................................................................

8

2.2

Wall mounting .........................................................................................

8

Step 1: Remove the panel from the foot ....................................................

8

Step 2: Fix the mounting plate to the wall ..................................................

8

Step 3: Place the panel on the mounting plate .........................................

9

2.3

Connecting the signals .........................................................................

10

To connect the video & sync signals: ......................................................

10

To connect the power: ..............................................................................

10

2.5

Install the software .................................................................................

11

2.4

Starting up ..............................................................................................

11

3.On-screen display (OSD) menus ...............................................................

12

3.1

How to use the OSD .............................................................................

12

3.2

Description of the menu items .............................................................

13

Main menu ...............................................................................................

13

Color Menu ..............................................................................................

14

Clock Menu ..............................................................................................

15

4. Maintenance ...............................................................................................

16

Panel ........................................................................................................

16

Cabinet ....................................................................................................

16

Touch panel .............................................................................................

16

Appendix A: Possible resolutions ..................................................................

17

Appendix B: Technical specifications .............................................................

18

MFCD 1219 (TS) User's Guide

4

1. OVERVIEW

1.1 Introduction

The MFCD 1219 (TS), BARCO’s full color 19” LCD display, guarantees perfect image quality in medical imaging applications.

The display combines a TFT (thin film transistor) liquid crystal display panel structure and a built-inbacklight with inverter for a better picture quality. It is designed to meet users' needs for performance, consistency, and outstanding image quality through a streamlined development process in whichwall-mountfunctionality provides a variety of capability.

The image on the display can be adjusted by means of the extended on-screenmenu system (OSD).

The internal memory can contain settings for 24 different types of video signals (with different timings). 22 are factory-preset,2 are userdefinable.

Multi-scan capabilities The display accepts the most common display standards. However, it is limited to the following specifications:

Analog video:

The horizontal frequency must be between 31 and 91 kHz, the vertical frequency between 56 and 85 Hz.

Digital video:

The horizontal frequency must be between 31.47 and 64 kHz, the vertical frequency between 60 and 70 Hz.

The optimum and recommended resolution is

1280 x 1024 / 60 Hz.

MFCD 1219 (TS) User's Guide

5

Power Saving

The monitor comes with a power saving feature;

 

therefore, you may put the monitor into a power

 

saving state when it is not in use. This feature

 

complies with both EPA‘s Energy Star

 

requirements and European NUTEK/TCO’s

 

power management guidelines. It conforms to

 

Video Electronics Standard Association (VESA)

 

approved DPMS power-downsignaling method.

 

This monitor automatically cuts down power

 

consumption of monitor set when not detecting

 

Hsync or Vsync signals. This feature is compliant

 

with VESA DPMS.

Touch panel

The MFCD 1219 TS is equipped with a touch

 

panel. Instructions on how to install and use the

 

touch panel driver and controls can be found in

 

the "TouchKit, Barco TouchScreen controller

 

installation and user manual" on the supplied

 

CD-ROM.

1.2 Package contents

The package should include the following items, please check. If some of the items are missing, please contact the reseller you have purchased the unit from.

-The display with foot

-12V DC adapter

-European power cord

-American power cord

-UK power cord

-Video cables: VGA cable and DVI-Dcable

-Mounting plate with 4 screws

-This user manual

-Calibration software CD-ROM

-USB cable for touch panel

MFCD 1219 (TS) User's Guide

6

1.3 Controls and connectors

(10)

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(8)

(9)

(1)12V DC power input

(2)Analog video input

(3)DVI input (DVI-Dsupported only)

(4)USB port for touch panel connection to PC (MFCD 1219 TS only)

(5)Menu key

(6)<->Key

(7)<+> Key

(8)Power LED

The LED is off when the display is off. The LED is green when the display is on. The LED is orange when the display is in power-savingmode(stand-by)

(9)Power key

(10)Push-buttonto release the panel from the foot

MFCD 1219 (TS) User's Guide

7