Barco MATRIXPRO-II 3G-HD-SD-SD User Manual

Size:
239.72 Kb
Download

MatrixPRO-II

HD/3G SDI series

User manual

Rev. 1.1

o Manual #:26-0903001-00o Revision: 01.1

MatrixPRO-II3G/HD/SD-SDIRouters

Rev. 1.1

Copyright

© Barco. March 09, 2011

All rights reserved. No part of this document may be copied, reproduced or translated. It shall not otherwise be recorded, transmitted or stored in a retrieval system without the prior written consent of Barco.

Notice

Barco provides this manual “as is” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties or merchantability and fitness for a particular purpose. Barco may make improvements and/or changes to the product(s) and/ or the program(s) described in this publication at any time without notice.

This publication could contain technical inaccuracies or typographical errors. Changes are periodically made to the information in this publication; these changes are incorporated in new editions of this publication.

Federal Communications (FCC) Statement

This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area may cause harmful interference, in which case the user will be responsible for correcting any interference.

Guarantee and Compensation

Barco provides a guarantee relating to perfect manufacturing as part of the legally stipulated terms of guarantee. On receipt, the purchaser must immediately inspect all delivered goods for damage incurred during transport, as well as for material and manufacturing faults Barco must be informed immediately in writing of any complaints.

The period of guarantee begins on the date of transfer of risks, in the case of special systems and software on the date of commissioning, at latest 30 days after the transfer of risks. In the event of justified notice of compliant, Barco can repair the fault or provide a replacement at its own discretion within an appropriate period. If this measure proves to be impossible or unsuccessful, the purchaser can demand a reduction in the purchase price or cancellation of the contract. All other claims, in particular those relating to compensation for direct or indirect damage, and also damage attributed to the operation of software as well as to other services provided by Barco, being a component of the system or independent service, will be deemed invalid provided the damage is not proven to be attributed to the

MatrixPRO-IIHD/3G SDI Series–User’sGuide - Rev. 1.1

2

MatrixPRO-II3G/HD/SD-SDIRouters

Rev. 1.1

absence of properties guaranteed in writing or due to the intent or gross negligence or part of Barco.

If the purchaser or a third party carries out modifications or repairs on goods delivered by Barco, or if the goods are handled incorrectly, in particular if the systems are commissioned operated incorrectly or if, after the transfer of risks, the goods are subject to influences not agreed upon in the contract, all guarantee claims of the purchaser will be rendered invalid. Not included in the guarantee coverage are system failures which are attributed to programs or special electronic circuitry provided by the purchaser, e.g. interfaces. Normal wear as well as normal maintenance are not subject to the guarantee provided by Barco either.

The environmental conditions as well as the servicing and maintenance regulations specified in this manual must be complied with by the customer.

Trademarks

Brand and product names mentioned in this manual may be trademarks, registered trademarks or copyrights of their respective holders. All brand and product names mentioned in this manual serve as comments or examples and are not to be understood as advertising for the products or their manufactures.

MatrixPRO-IIHD/3G SDI Series–User’sGuide - Rev. 1.1

3

MatrixPRO-II3G/HD/SD-SDIRouters

Rev. 1.1

Company Address

Barco, Inc.

11101 Trade Center Drive

Rancho Cordova,

California 95670 USA

Phone: (916) 859-2500

Fax: (916) 859-2515

Barco N.V.

Noordlaan 5 8520

Kuurne

BELGIUM

Phone: +32 56.36.82.11

Fax: +32 56.35.16.51

Website: www.barco.com

Technical Support

Customer Service Portal www.barco.com/esupport (866)374-7878— Events (24/7)

(866) 469-8036 — Digital Cinema (24/7)

MatrixPRO-IIHD/3G SDI Series–User’sGuide - Rev. 1.1

4

MatrixPRO-II3G/HD/SD-SDIRouters

Rev. 1.1

Operators Safety Summary

The general safety information in this summary is for operating personnel.

Do not remove panels or covers

There are no user-serviceableparts within the unit. Removal of the top cover will expose dangerous voltages. To avoid personal injury, do not remove the top cover. Do not operate the unit without the cover installed.

Power Source

This product is intended to operate from a power source that will not apply more than 230 volts rms between the supply conductors or between both supply conductor and ground. A protective ground connection by way of grounding conductor in the power cord is essential for safe operation.

Grounding the Product

This product is grounded through the grounding conductor of the power cord. To avoid electrical shock, plug the power cord into a properly wired receptacle before connecting to the product input or output terminals. A protective-groundconnection by way of the grounding conductor in the power cord is essential for safe operation.

Use of the Power Cord

Use only the power cord and connector specified for your product. Use only a power cord that is in good condition. Refer cord and connector changes to qualified service personnel.

Use of the Proper Fuse

To avoid fire hazard, use only the fuse having identical type, voltage rating, and current rating characteristics. Refer fuse replacement to qualified service personnel.

Do not Operate in Explosive Atmospheres

To avoid explosion, do not operate this product in an explosive atmosphere.

MatrixPRO-IIHD/3G SDI Series–User’sGuide - Rev. 1.1

5

MatrixPRO-II3G/HD/SD-SDIRouters

Rev. 1.1

Terms in This Manual and Equipment Marking

Warning

Highlights an operating procedure, practice, condition, statement, etc., which, if not strictly observed, could result in injury to or death of

personnel.

Highlights an essential operating procedure,

condition or Statement

NOTE

Caution

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

AVETISSEMENT!

Le point d´exclamation dans un triangle equilatéral signale à alerter l´utilisateur qu´il y a des instructions d´operation et d´entretien tres importantes dans la litérature qui accompagne l´appareil.

VORSICHT

Ein Ausrufungszeichen innerhalb eines gleichwinkeligen Dreiecks dient dazu, den Benutzer auf wichtige Bedienungs-undWartungsanweisungen in der Dem Great beiliegenden Literatur aufmerksam zu machen.

MatrixPRO-IIHD/3G SDI Series–User’sGuide - Rev. 1.1

6

MatrixPRO-II3G/HD/SD-SDIRouters

Rev. 1.1

Change History

 

Date

ECP #

Description

Approved By

0.0

5/20/10

578607

User’s Guide

GKOU

1.1

3/09/11

586286

Added default IP address

GKOU

 

 

 

Added interface commands appendix

 

 

 

 

Added MP-II3G Configuration Tool

 

MatrixPRO-IIHD/3G SDI Series–User’sGuide - Rev. 1.1

7

MatrixPRO-II3G/HD/SD-SDIRouters

Rev. 1.1

 

Contents

 

1.1

Product versions.....................................................................................................

10

2

Specifications................................................................................................

11

2.1

Mechanics ................................................................................................................

11

2.1.1

Weight and power consumption ..........................................................................

11

2.2

Power Supply ..........................................................................................................

11

2.3

Control......................................................................................................................

11

2.4

Video specifications................................................................................................

12

2.5

Connection details..................................................................................................

13

2.5.1

Power Supply pinout..............................................................................................

13

3

Configuration................................................................................................

14

3.1

SW1 – SW4: Address/Level Not Used...............................................................

14

3.2

SW5-SW6:Router mode.......................................................................................

14

3.2.1

Router mode on NxN square routers..................................................................

14

3.3

SW7: Power alarm .................................................................................................

18

3.4

SW8: Power-upmode............................................................................................

18

3.5

Switching time ........................................................................................................

19

3.6

Configuring protocol options ................................................................................

19

4

LED status indication ..................................................................................

20

4.1

Start-up....................................................................................................................

20

4.2

Alarm states............................................................................................................

20

4.3

Ethernet states .......................................................................................................

20

5

Router communication................................................................................

21

5.1

Serial connection....................................................................................................

21

5.1.1

Maximum cable length (RS-232).........................................................................

21

5.2

Ethernet connection...............................................................................................

22

6

Control Panel operation..............................................................................

23

6.1

Button description..................................................................................................

23

7

Environmental Specifications ..........................................................................

25

Appendix A..................................................................................................................

26

A.1 Materials declaration......................................................................................................

26

A.2 Recycling information ....................................................................................................

27

A.3 Declarations of Conformity ..................................................................................................

28

Appendix B Remote Commands..............................................................................

29

B.1 X-PointTake .......................................................................................................................

30

MatrixPRO-IIHD/3G SDI Series–User’sGuide - Rev. 1.1

8

MatrixPRO-II3G/HD/SD-SDIRouters

Rev. 1.1

B.2

Request X-PointStatus .......................................................................................................

31

B.3

Router Ping .........................................................................................................................

32

B.4

Level List.............................................................................................................................

32

Appendix C Barco MPII-3GConfiguration Tool ....................................................

33

MatrixPRO-IIHD/3G SDI Series–User’sGuide - Rev. 1.1

9

MatrixPRO-II3G/HD/SD-SDIRouters

Rev. 1.1

Product overview

This User Manual presents the features, installation and operation procedures of (3G/HD/SDSDI) routers of the Barco MatrixPRO-IIseries.

Router models available: 8x8, 16x16 and 32x32

Communication: TCP/IP and RS-232

Programmable multisingleand dual bus control panels

Ultra Slim frame depth

Low Power, high reliability design

Redundant power supply system with front indicators

Future proof and flexible product range

Barco’s MatrixPRO-II3G/HS/SD-SDIseries is ideal for general events, fixed installations, onair routing, mobile outside broadcast applications and sophisticated A/V applications.

1.1Product versions

The following versions of the Barco MatrixPRO-II3G/HD/SD-SDIRouters are available:

1RU, Depth 5cm

 

R9004661

8x8 HD/3G Digital Video Router

 

Multirate: 270Mbps-2.97Gbps

 

Router partitioning.

 

Reclocking.

R9004660

16x16 HD/3G Digital Video Router

 

Multirate: 270Mbps-2.97Gbps

 

Router partitioning.

 

Reclocking.

2RU, depth 5cm:

 

R9004662

32x32 HD/3G Digital Video Router

 

Multirate: 270Mbps-2.97Gbps

 

Router partitioning.

 

Reclocking.

MatrixPRO-IIHD/3G SDI Series–User’sGuide - Rev. 1.1

10