Barco GRAPHICS 500 R9002930 User Manual
Size:
6.88 Mb
Download

A. Cleaning the dustfilters

A. CLEANING THE DUSTFILTERS

Overview

Dustfilters

Cleaning

A.1 Dustfilters

Location of the filters

There are 4 filters located at different positions

1.Filter1: Lamp 1

2.Filter2 : Lamp 2

3.Filter 3 : X-Cubefilter

4.Filter 4 : Input filter

Image A-1

location of the filters

1lamp filter 1

2lamp filter 2

3x-cubefilter

4input filter

A.2 Cleaning

How to clean the dustfilters ?

1.Place the projector so as to access easily the filter to be cleaned

2.Push the handle downwards to unlock the filter. (image A-2)

3.Slide out the filter (image A-3,image A-4,image A-5)Seeimage A-6.

4.Clean the dust filter with a dry cloth.

5.Re-insertthe dust filter by sliding it back in the filter housing.

Image A-2

Location of the x-cubefilter and its handle

R5976367 BARCOIQ GRAPHICS 500 01/02/2007

 

125

A. Cleaning the dustfilters

Image A-4

lamp & X-Cubefilters removed

Image A-3

Lamp filter removal

Image A-6

Input filter removed

Image A-5

Input filter removal

If the airflow is falling under a predetermined treshold value a warning will be displayed on the screen.

Image A-7

At that time it is strongly recommended to replace or clean the dustfilter under the X-cube.Failing to do so, will strongly reduce the lifetime of the LCD’s and the analyzers.

The manufacturer reserves itself the right to refuse warranty repair if the projector was working with dirty dustfilters.

126

 

R5976367 BARCOIQ GRAPHICS 500 01/02/2007