Barco GRAPHICS 500 R9002930 User Manual
Size:
6.88 Mb
Download

13. Installation menu

13. INSTALLATION MENU

Overview

Lens adjustments

Projector address

Orientation

Language

Quick access keys

RS232 baudrate

Automatic startup

Security

Change password

Gemini installed (only for GEMINI CADWALL systems ! )

13.1Lens adjustments

What can be done ?

Motorized lenses can be adjusted in the installation menu or via the dedicated keys on the remote.

The following parameters can be adjusted:

Zoom

Focus

Shift (also for non motorized lenses)

How to Zoom/focus or shift ?

1.Press MENU to activate the Toolbar

2.Press → to select the Installation

3.Press ↓ to Pull down the Installation menu

4.Use ↑ or ↓ to select Lens adjustment (image 13-1)

5.Press ENTER

A textbox appears on the screen, follow the instructions. (image 13-2,image 13-3)

Image 13-1

R5976367 BARCOIQ GRAPHICS 500 01/02/2007

 

115

13. Installation menu

Image 13-2

Image 13-3

13.2 Projector address

What can be done ?

The projector is shipped with projector address set to ”0”

In some cases the projector address must be changed, for example if an unique RCU is used to control 2 or more projectors (independently).

In the OSD menu Projector Address, the following addresses can be programmed :

Projector address: address defined by the user, may be from 0 to 255

0-9is used for RCU communication,0–255being used for RS232 serial communication.

Common address : address may be 0 or 1

How to change the projector’s RC5 address ?

1.Press MENU to activate the Tool bar

2.Press → to select the Installation

3.Press ↓ to Pull down the Installation menu

4.Use ↑ or ↓ to select Projector address (image 13-4)

5.Press ENTER

A dialog box appears on the screen. (image 13-5,image 13-6)

Image 13-4

116

 

R5976367 BARCOIQ GRAPHICS 500 01/02/2007

13. Installation menu

Image 13-5

Image 13-6

Entering the new projector address ?

1. Enter the new projector address with the digit keys on the RCU, the local keypad or the cursor keys.

This address must be between 0 and 255.

How to change the common RC5 address ?

1.Press MENU to activate the Tool bar

2.Press → to select the Installation

3.Press ↓ to Pull down the Installation menu

4.Use ↑ or ↓ to select Projector address

5.Press ENTER

A dialog box appears on the screen.

Entering the new common address ?

1. Enter the new projector address with the digit keys on the RCU, the local keypad or the cursor keys.

This address must be between 0 or 1.

13.3 Orientation

Projector orientations

Depending on how the projector is oriented, the projector’s internal settings have to be adapted.

How to change the orientation ?

1.Press MENU to activate the Toolbar

2.Press → to select the Installation item

3.Press ↓ to Pull down the Installation menu

4.Use ↑ or ↓ to select Orientation

5.Press → to pull down the menu

6.Use ↓ or ↑ to select the desired orientation (image 13-7)

7.Press ENTER

The projection is adapted and a black bullet shows the active configuration.

R5976367 BARCOIQ GRAPHICS 500 01/02/2007

 

117

 

13. Installation menu

Image 13-7

13.4 Language

List of languages

The list of selectable languages is depending on the software of the projector.

How to change the Language ?

1.Press MENU to activate the Tool bar

2.Press → to select the Installation item

3.Press ↓ to Pull down the Installation menu

4.Use ↑ or ↓ to select Language

5.Press → to pull down the menu

6.Use ↓ or ↑ to select the desired language (image 13-8)

7.Press ENTER

The language is adapted and a black bullet shows the active configuration.

Image 13-8

118

 

R5976367 BARCOIQ GRAPHICS 500 01/02/2007