Barco GRAPHICS 500 R9002930 User Manual
Size:
6.88 Mb
Download

10. Lamp Menu

Image 10-9

10.5 Reset runtime

When to reset the lamp runtime ?

The lamp runtime should only be reset when placing a new lamp.

WARNING: Lamp runtime reset as well as the lamp replacement can only be done by a Barco authorized technician.

How to reset the lamp runtime in the iQ/iD ?

1.Press MENU to activate the Tool bar

2.Press → to select the Lamp item

3.Press ↓ to Pull down the Lamp menu

4.Use ↑ or ↓ to select Reset runtime

5.Press → to pull down the menu

6.Use ↑ or ↓ to select the lamp to be reset (image 10-10)

7.Press ENTER

A dialog box is displayed (image 10-11)

8.Use ←or →, the numeric keys on the remote, or the keypad to change the serial number of the lamp (serial number 0000000 will not be accepted).

Image 10-10

R5976367 BARCOIQ GRAPHICS 500 01/02/2007

 

93

10. Lamp Menu

Image 10-11

WARNING: Lamp runtime reset as well as the lamp replacement can only be done by a Barco authorized technician.

How to reset the lamp runtime in the SIM5Plus?

1.Press MENU to activate the Tool bar

2.Press → to select the Lamp item

3.Press ↓ to Pull down the Lamp menu

4.Use ↑ or ↓ to select Reset runtime

5.Press → to pull down the menu

6.Use ↑ or ↓ to select the lamp to be reset

7.Press ENTER

A dialog box is displayed (image 10-12)

8.Use ←or →, the numeric keys on the remote, or the keypad to change the serial number of the lamp (serial number 0000000 will not be accepted).

Image 10-12

WARNING: Lamp runtime reset as well as the lamp replacement can only be done by a Barco authorized technician.

10.6 Runtime warning

What can be done ?

When the lamp has reached a certain predetermined runtime , a warning message will be displayed on the screen. The lamp runtime warning can be set in a range from 30 to 200 hours. The runtime warning is displayed by default at 30 hours before end of lamp lifetime.

94

 

R5976367 BARCOIQ GRAPHICS 500 01/02/2007

10. Lamp Menu

How to set the lamp runtime warning?

1.Press MENU to activate the Toolbar

2.Press → to select the Lamp item

3.Press ↓ to Pull down the Lamp menu

4.Use ↑ or ↓ to select Runtime warning (image 10-13)

5.Press ENTER

A dialogbox is displayed (image 10-14)

6.Use ←or →, the numeric keys on the remote, or the keypad to change the runtime warning setting.

Image 10-13

Image 10-14

WARNING: Lamp runtime reset as well as the lamp replacement can only be done by a Barco authorized technician.

R5976367 BARCOIQ GRAPHICS 500 01/02/2007

 

95

10. Lamp Menu

96

 

R5976367 BARCOIQ GRAPHICS 500 01/02/2007