Barco GRAPHICS 500 R9002930 User Manual
Size:
6.88 Mb
Download

8. Tools Menu

4.Use ↑ or ↓ to select PiP layout

5.Press → to pull down the menu

6.Use ↑ or ↓ to select Delete

7.Press ENTER

A dialog box is displayed (image 8-14)

8.Use ↑ or ↓ to select the layout to be renamed

9.Press ENTER

The layout is deleted and disappears from the dialog box

Image 8-14

8.6PiP Adjust

What can be done ?

PiP adjust allows to browse through the windows in the active layout, a white frame indicates the window which has the focus. This way, independent settings (picture settings, ...) are possible for each window.

This can also be done by using the dedicated PiP Adjust key on the RCU

Image 8-15

PiP adjust in case of 2by2 layout

AData1 window has the focus, new settings will only affect Data1 window

BVideo1 window has the focus, new settings will only affect Video1 window

PiP adjust

1. Press MENU to activate the Toolbar

R5976367 BARCOIQ GRAPHICS 500 01/02/2007

 

83

8.Tools Menu

2.Press → to select the Tools item

3.Press ↓ to Pull down the Tools menu

4.Use ↑ or ↓ to select PiP Adjust (image 8-16)

5.Press ENTER

The menu dissapears.

The focus moves to the next window when pressing ENTER (clockwise rotation) If you pressBACK or if you wait 5 seconds the menu is displayed.

Image 8-16

When using the PiP adjust key on the RCU the corresponding source box is displayed in the bottom right corner.

How to adjust a window in the layout ?

1.Use the PiP Adjust key or function in the menu to choose the window to be adjusted

2.Press ENTER

A wizard bar is displayed in the bottom of the screen Follow the procedure.

8.7Diagnostics

What can be done ?

The I2C bus allows the diagnostic of different hardware components

How to display the diagnostics menu ?

1.Press MENU to activate the Toolbar

2.Press → to select the Tools item

3.Press ↓ to Pull down the Tools menu

4.Use ↑ or ↓ to select Diagnostics

5.Press → to pull down the menu

6.Press ENTER to select I2C(image 8-17)

A textbox is displayed (image 8-18, image 8-19)

84

 

R5976367 BARCOIQ GRAPHICS 500 01/02/2007

8. Tools Menu

Image 8-17

I2C diagnostics

Device Slave address

fpga backplane1 fpga backplane2 fpga backplane3 ADC layer1 ADC layer2 ADC layer3

Serial eeprom DVI layer2 Serial eeprom DVI layer3 Video decoder

Video indicator Video Processor Motor driver Lamp driver

Image 8-18

Image 8-19

R5976367 BARCOIQ GRAPHICS 500 01/02/2007

 

85

8. Tools Menu

86

 

R5976367 BARCOIQ GRAPHICS 500 01/02/2007