Barco GRAPHICS 500 R9002930 User Manual
Size:
6.88 Mb
Download

7. Image Menu

7. IMAGE MENU

Overview

Settings

Aspect ratio

Show native resolution

Keystone

Color temperature

Filmmode detection

Blanking

Input balance

AGC on Video

Manual Gain Control

7.1Settings

Overview

Contrast

Brightness

Color

Tint (hue)

Sharpness

Gamma

Phase

Noise reduction

What can be done ?

Correct image settings are important for a good image reproduction. The image settings are made through a dialog box with a scroll bar. Minimal, maximal and actual values are indicated. These settings can also be done directly via the RCU’s dedicated buttons, except for the sharpness.

Image 7-1

Image 7-2

R5976367 BARCOIQ GRAPHICS 500 01/02/2007

 

57

7. Image Menu

7.1.1Contrast

Contrast adjustment

Adjust the contrast to “brighten” the white parts of the image.

It is recommended to adjust the brightness before adjusting the contrast.

How to change the contrast

1.Press MENU to activate the Toolbar

2.Press → to select the Image item

3.Press ↓ to Pull down the Image menu

4.Use ↑ or ↓ to select settings

5.Press → to pull down the menu

6.Use ↑ or ↓ to select Contrast

7.Press ENTER

On the screen appears now a sliderbox (image 7-3)

8.Use ←or → , the numeric keys on the remote, or the keypad to change the contrast

Image 7-3

7.1.2Brightness

Brightness adjustment

Adjusting the brightness will affect the dark areas of the image. Increase the brightness to “lighten” up the parts that are too dark.

How to change the Brightness ?

1.Press MENU to activate the Toolbar

2.Press → to select the Image item

3.Press ↓ to Pull down the Image menu

4.Use ↑ or ↓ to select settings

5.Press → to pull down the menu

6.Use ↓ or ↑ to select Brightness

7.Press ENTER

On the screen appears now a sliderbox (image 7-4)

8.Use ←or → , the numeric keys on the remote, or the keypad to change the Brightness

Image 7-4

7.1.3Color

Color adjustment

Adjust the color to obtain more or less saturated colors.

58

 

R5976367 BARCOIQ GRAPHICS 500 01/02/2007

7. Image Menu

How to change the Color ?

1.Press MENU to activate the Toolbar

2.Press → to select the Image item

3.Press ↓ to Pull down the Image menu

4.Use ↑ or ↓ to select settings

5.Press → to pull down the menu

6.Use ↓ or ↑ to select Color

7.Press ENTER

On the screen appears now a sliderbox (image 7-5)

8.Use ←or → , the numeric keys on the remote, or the keypad to change the Color

Image 7-5

7.1.4Tint (hue)

How to change the Tint ?

1.Press MENU to activate the Toolbar

2.Press → to select the Image item

3.Press ↓ to Pull down the Image menu

4.Use ↑ or ↓ to select settings

5.Press → to pull down the menu

6.Use ↓ or ↑ to select Tint

7.Press ENTER

On the screen appears now a sliderbox

8.Use ←or → , the numeric keys on the remote, or the keypad to change the Tint

7.1.5Sharpness

How to change the sharpness ?

1.Press MENU to activate the Toolbar

2.Press → to select the Image item

3.Press ↓ to Pull down the Image menu

4.Use ↑ or ↓ to select settings

5.Press → to pull down the menu

6.Use ↓ or ↑ to select sharpness

7.Press ENTER

On the screen appears now a sliderbox

8.Use ←or → , the numeric keys on the remote, or the keypad to change the sharpness

7.1.6Gamma

How to change the Gamma

1.Press MENU to activate the Toolbar

2.Press → to select the Image item

3.Press ↓ to Pull down the Image menu

4.Use ↑ or ↓ to select settings

R5976367 BARCOIQ GRAPHICS 500 01/02/2007

 

59