Barco 26-1302001-00 User Manual

Size:
4.12 Mb
Download

MatrixPRO-II

DVI 16x16 Matrix Router

User’s Guide

_________________________________________________________

Manual #: 26-1302001-00Revision: 01

MatrixPRO-IIDVI 16x16 Router

________________________________________________________________________

Copyright © Barco. March 24, 2013

All rights reserved. No part of this document may be copied, reproduced or translated. It shall not otherwise be recorded, transmitted or stored in a retrieval system without the prior written consent of Barco.

Notice

Barco provides this manual “as is” without warranty of any kind, expressed or implied, including but not limited to the implied warranties or merchantability and fitness for a particular purpose. Barco may make improvements and/or changes to the product(s) and/ or the program(s) described in this publication at any time without notice.

This publication could contain technical inaccuracies or typographical errors. Changes are periodically made to the information in this publication; these changes are incorporated in new editions of this publication.

Federal Communications (FCC) Statement

This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area may cause harmful interference, in which case the user will be responsible for correcting any interference.

Guarantee and Compensation

Barco provides a guarantee relating to perfect manufacturing as part of the legally stipulated terms of guarantee. On receipt, the purchaser must immediately inspect all delivered goods for damage incurred during transport, as well as for material and manufacturing faults Barco must be informed immediately in writing of any complaints.

The period of guarantee begins on the date of transfer of risks, in the case of special systems and software on the date of commissioning, at latest 30 days after the transfer of risks. In the event of justified notice of compliant, Barco can repair the fault or provide a replacement at its own discretion within an appropriate period. If this measure proves to be impossible or unsuccessful, the purchaser can demand a reduction in the purchase price or cancellation of the contract. All other claims, in particular those relating to compensation for direct or indirect damage, and also damage attributed to the operation of software as well as to other services provided by Barco, being a component of the system or independent service, will be deemed invalid provided the damage is not proven to be attributed to the absence of properties guaranteed in writing or due to the intent or gross negligence or part of Barco.

If the purchaser or a third party carries out modifications or repairs on goods delivered by Barco, or if the goods are handled incorrectly, in particular if the systems are commissioned operated incorrectly or if, after the transfer of risks, the goods are subject to influences not agreed upon in the contract, all guarantee claims of the purchaser will be rendered invalid. Not included in the guarantee coverage are system failures which are attributed to programs or special electronic circuitry provided by the purchaser, e.g. interfaces. Normal wear as well as normal maintenance are not subject to the guarantee provided by Barco either.

The environmental conditions as well as the servicing and maintenance regulations specified in this manual must be complied to by the customer.

2

User’s Guide

Rev. 01

MatrixPRO-IIDVI 16x16 Router

________________________________________________________________________

Trademarks

Brand and product names mentioned in this manual may be trademarks, registered trademarks or copyrights of their respective holders. All brand and product names mentioned in this manual serve as comments or examples and are not to be understood as advertising for the products or their manufactures.

__________________________________________________________________

Company Address

Barco, Inc.

11101 Trade Center Drive

Rancho Cordova,

California 95670 USA

Phone: (916) 859-2500

Fax: (916) 859-2515

Barco N.V.

Noordlaan 5 8520

Kuurne

BELGIUM

Phone: +32 56.36.82.11

Fax: +32 56.35.16.51

Website: www.barco.com

Technical Support

Customer Service Portal www.barco.com/esupport (866)374-7878— Events (24/7)

(866) 469-8036 — Digital Cinema (24/7)

3

User’s Guide

Rev. 01

MatrixPRO-IIDVI 16x16 Router

________________________________________________________________________

Operators Safety Summary

The general safety information in this summary is for operating personnel.

Do not remove panels or covers

There are no user-serviceableparts within the unit. Removal of the top cover will expose dangerous voltages. To avoid personal injury, do not remove the top cover. Do not operate the unit without the cover installed.

Power Source

This product is intended to operate from a power source that will not apply more than 230 volts rms between the supply conductors or between both supply conductor and ground. A protective ground connection by way of grounding conductor in the power cord is essential for safe operation.

Grounding the Product

This product is grounded through the grounding conductor of the power cord. To avoid electrical shock, plug the power cord into a properly wired receptacle before connecting to the product input or output terminals. A protective-groundconnection by way of the grounding conductor in the power cord is essential for safe operation.

Use of the Power Cord

Use only the power cord and connector specified for your product. Use only a power cord that is in good condition. Refer cord and connector changes to qualified service personnel.

Use of the Proper Fuse

To avoid fire hazard, use only the fuse having identical type, voltage rating, and current rating characteristics. Refer fuse replacement to qualified service personnel.

Do not Operate in Explosive Atmospheres

To avoid explosion, do not operate this product in an explosive atmosphere.

4

User’s Guide

Rev. 01

MatrixPRO-IIDVI 16x16 Router

________________________________________________________________________

Terms in This Manual and Equipment

Marking

Warning

Highlights an operating procedure, practice, condition, statement, etc., which, if not strictly observed, could result in injury to or death of personnel.

Caution

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

AVETISSEMENT!

Le point d´exclamation dans un triangle equilatéral signale à alerter l´utilisateur qu´il y a des instructions d´operation et d´entretien tres importantes dans la litérature qui accompagne l´appareil.

VORSICHT

Ein Ausrufungszeichen innerhalb eines gleichwinkeligen Dreiecks dient dazu, den Benutzer auf wichtige Bedienungs-undWartungsanweisungen in der Dem Great beiliegenden Literatur aufmerksam zu machen.

Disposal of the Product (wast Electrical and Electronic Equipment)

This symbol on the product indicates that, under the European Directive 2002/96/EC governing waste from electrical and electronic equipment, this product must not be disposed of with other municipal waste. Please dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources.

For more information about recycling of this product, please contact your local city office or your municipal waste disposal service. For details, please visit the Barco website at:

http://www.barco.com/en/AboutBarco/weee

Turkey RoHS Compliance

Türkiye Cumhuriyeti: EEE Yönetmeliğine Uygundur

Republic of Turkey: In conformity with the EEE Regulation

5

User’s Guide

Rev. 01

MatrixPRO-IIDVI 16x16 Router

________________________________________________________________________

RoHS

Chinese Mainland RoHS

RoHS Barco/ RoHS MCV “”

According to the “China Administration on Control of Pollution Caused by Electronic Information Products” (Also called RoHS of Chinese Mainland), the table below lists the names and contents of toxic and/or hazardous substances that Barco’s product may contain. The RoHS of Chinese Mainland is included in the MCV standard of the Ministry of Information Industry of China, in the section “Limit Requirements of toxic substances in Electronic Information Products”.

 

( )

 

 

 

 

 

 

 

Component Name

Hazardous Substances or Elements

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(Pb)

(Hg)

(Cd)

(Cr6+)

(PBB)

 

 

(PBDE)

 

 

 

 

 

 

 

 

 

 

 

 

O

O

O

O

 

O

 

O

 

Printed Circuit Assemblies

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

O

O

O

O

 

O

 

O

 

Plug in Printed Circuit Assembly

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

( )

O

O

O

O

 

O

 

O

 

External Cables

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

O

O

O

O

 

O

 

O

 

Chassis

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

O

O

O

O

 

O

 

O

 

Power Supply Unit

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

O

O

O

O

 

O

 

O

 

Internal wiring

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

( )

O

O

O

O

 

O

 

O

 

Display

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

( )

O

O

O

O

 

O

 

O

 

Heatsinks

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

O

O

O

O

 

O

 

O

 

Fan

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

O

O

O

O

 

O

 

O

 

CD Manual

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(

)

O

O

O

O

 

O

 

O

 

Front panel

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

O: SJ/T 11363-2006 .

 

O: Indicates that this toxic or hazardous substance contained in all of the homogeneous

 

materials for this part is below the limit requirement in SJ/T11363-2006.

 

 

 

 

X:

SJ/T 11363-2006

 

 

.

 

 

 

 

 

 

 

 

 

 

X: Indicates that this toxic or hazardous substance contained in at least one of the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6

 

 

 

 

 

 

User’s Guide

 

 

 

 

 

 

Rev. 01

MatrixPRO-IIDVI 16x16 Router

________________________________________________________________________

homogeneous materials used for this part is above the limit requirement in SJ/T11363-2006.

EIPEFUP Barco EFUP

All Electronic Information Products (EIP) that are sold within Chinese Mainland must comply with the “Electronic Information Products Pollution Control Labeling Standard” of Chinese Mainland, marked with the Environmental Friendly Use Period (EFUP) logo. The number inside the EFUP logo that Barco uses (please refer to the photo) is based on the “Standard of Electronic Information Products Environmental Friendly Use Period” of Chinese Mainland.

7

User’s Guide

Rev. 01

MatrixPRO-IIDVI 16x16 Router

________________________________________________________________________

CHANGEHISTORY

Rev

Date

ECP #

Description

Approved By

00

6/7/13

606947

User’s Guide

GKOU

01

7/29/13

608395

User’s Guide

MYRA

 

 

 

 

 

 

 

 

 

 

8

User’s Guide

Rev. 01

MatrixPRO-IIDVI 16x16 Router

________________________________________________________________________

TABLE OFCONTENTS

1

Introduction.....................................................................................................

11

1.1

 

Key Features....................................................................................................

11

1.2

 

Shipping..........................................................................................................

11

1.3

 

Notice Of Safe Usage ........................................................................................

12

1.4

 

Physical Description ..........................................................................................

13

2

Installation ......................................................................................................

14

2.1

 

Initialization.....................................................................................................

14

2.2

 

EDID Configuration ...........................................................................................

14

3

Control Setup ...................................................................................................

16

3.1

 

TCP/IP.............................................................................................................

16

3.1.1

Launching Telnet............................................................................................

16

3.2

 

RS-232............................................................................................................

17

3.2.1

Launching HyperTerminal................................................................................

17

4

Front Panel Operation ......................................................................................

18

4.1

 

LINK mode.......................................................................................................

18

4.2

 

UNLINK mode ..................................................................................................

18

4.3

 

PRESET mode (“SHIFT ON PRESET”) ...................................................................

18

4.4

 

FUNCTION mode ..............................................................................................

18

4.4.1

Gateway .......................................................................................................

19

4.4.2

Subnet Mask..................................................................................................

19

4.4.3

IP Address.....................................................................................................

19

4.4.4

MAC Address .................................................................................................

20

4.4.5

UDP Port Number...........................................................................................

20

4.4.6

Video Generator.............................................................................................

20

4.4.7

Monitoring Output ..........................................................................................

20

4.4.8

EDID Configure..............................................................................................

20

4.4.9

HDCP Configure .............................................................................................

22

4.4.10 Baud Rate .....................................................................................................

23

4.4.11 Control Lock ..................................................................................................

23

4.4.12 Reset Mode ...................................................................................................

23

5

PC Program Operation......................................................................................

24

5.1

 

Basic Setup......................................................................................................

24

5.1.1

Connect Info..................................................................................................

25

5.1.2

Channel Name ...............................................................................................

26

5.1.3

Video Generator.............................................................................................

26

5.1.4

Control Lock Mode..........................................................................................

26

5.1.5

Network........................................................................................................

26

5.2

 

EDID setup ......................................................................................................

26

5.3

 

Operation ........................................................................................................

27

5.3.1Input / output connection ..................................................................................

28

5.3.2Input channel status .........................................................................................

28

5.3.3Output channel status .......................................................................................

29

6 Web control panel operation ............................................................................

30

7

Commands .......................................................................................................

31

7.1

 

Command input structure ..................................................................................

31

7.2

 

Examples of command inputs.............................................................................

32

7.2.1 Link input and output

.....................................................................................32

 

9

User’s Guide

Rev. 01

MatrixPRO-IIDVI 16x16 Router

________________________________________________________________________

7.2.2 Input and output status ..................................................................................

32

7.2.3

Network setting .............................................................................................

33

7.2.4 Monitor output port setting..............................................................................

33

7.2.5

EDID control command ...................................................................................

33

7.2.6

HDCP Setting.................................................................................................

34

7.2.7 Baud rate setting for RS-232 ...........................................................................

34

7.2.8

Control lock command ....................................................................................

35

8

Firmware update..............................................................................................

36

9

HDCP notes ......................................................................................................

40

10

Specifications...................................................................................................

41

11

Warranty..........................................................................................................

42

12

Contact Information.........................................................................................

43

10

User’s Guide

Rev. 01