Barco 26-0503000-00 User Manual
Size:
991.7 Kb
Download

2. Hardware Orientation

MatrixPRO 8x8 DVI Router Rear Panel

j~нкбсmol=UсU=asf=oзмнЙк=oЙ~к=m~еЙд

The figure below illustrates the MatrixPRO 8x8 DVI Router rear panel:

 

 

 

 

 

 

 

3

5

 

 

 

 

 

 

 

 

SERIAL

 

 

 

 

INPUTS

 

 

OUTPUTS

 

ETHERNET

 

 

5

6

7

8

5

6

7

8

 

 

1

2

3

4

1

2

3

4

 

 

 

 

 

 

 

 

 

 

100-240V

50-60Hz

 

 

 

 

 

 

 

 

3.0 A

 

 

 

1

 

 

2

 

4

 

 

 

 

Figure 2-1. MatrixPRO 8x8 DVI Router Rear Panel

 

 

 

 

1)

DVI Input Connectors

4)

Ethernet Port

 

 

 

 

2)

DVI Output Connectors

5)

AC Connector

 

 

 

 

3)

Serial Port

 

 

 

 

 

 

Following are descriptions of each rear panel connector:

1)DVI Input Connectors

Eight DVI input connectors are provided. Each connector has an associated LED that lights green to indicate the presence of a valid video signal.

~In Appendix A, refer to the “Input Specifications” section onpage 86 for input video details.

~In Appendix A, refer to the “DVI Connector” section onpage 88 for pinout specifications.

2)DVI Output Connectors

Eight DVI output connectors are provided.

~In Appendix A, refer to the “Output Specifications” section onpage 86 for output video details.

~In Appendix A, refer to the “DVI Connector” section onpage 88 for pinout specifications.

3)Serial Port

One 9-pinD connector is provided forRS-232serial communications with the MatrixPRO 8x8 DVI Router chassis and for downloading code in the field. InAppendix A, refer to the “Serial Connector” section onpage 90 for pinouts.

4)Ethernet Port

One RJ-45connector is provided for 10/100BaseTEthernet communications with the MatrixPRO 8x8 DVI Router chassis. When (optionally) connecting the router to an Encore or remote control panel, a standard Ethernet hub or switch on an isolated network is recommended.

MatrixPRO • 8x8 DVI Router • User’s Guide

 

21

 

2. Hardware Orientation

MatrixPRO 8x8 DVI Router Rear Panel

The Ethernet connector is compatible with:

~Standard RJ-45Ethernet cables

~Neutrik EtherCon® series cables

In Appendix A, refer to the “Ethernet Connector” section onpage 89 for pinouts.

5)AC Connector

One AC Connector is provided to connect the MatrixPRO 8x8 DVI Router to your facility’s AC power source. The integral switch turns the chassis on and off.

22

 

MatrixPRO • 8x8 DVI Router • User’s Guide