Barco 26-0503000-00 User Manual
Size:
991.7 Kb
Download

_K==oЙгзнЙ=`зенкзд=mкзнзЕзд

MatrixPRO Remote Commands

j~нкбсmol=oЙгзнЙ=`згг~еЗл

The table below lists MatrixPRO 8x8 DVI Router remote commands.

Table B-2. MatrixPRO 8x8 DVI Router Remote Commands

Command

Description

Page

CLEAR

Clear all matrix video routings

95

 

 

 

DHCP

Enable/disable DHCP mode

95

 

 

 

FPLOCK en

Lock/unlock the front panel from user input

95

 

 

 

GCLEAR grp

Clears grouping information for the specified group

95

 

 

 

GADD grp out in

Add an output and/or input to the selected group

95

 

 

 

GDEL grp out in

Remove output and/or input from the selected group.

96

 

 

 

IP

Set or update IP Address

96

 

 

 

IPINFO

Provides information regarding Ethernet

96

 

 

 

LOADR

Places unit into loader mode for field upgrades

96

 

 

 

MPRC

Remote panel communication, begin command

96

 

 

 

OSTAT

Show output status

96

 

 

 

NSTAT

Send the number of inputs and outputs

97

 

 

 

PRST num

Saves current front panel configuration/routing to a Preset location

97

 

 

 

PSTAT

Displays preset information

97

 

 

 

RESET

Resets the system

97

 

 

 

REV

MatrixPRO board revision and main software version information

97

 

 

 

RGBMUTE

Mutes the output channel, syncs remain

98

 

 

 

RPRST num

Recall an existing preset

98

 

 

 

RTEMP out in

Routes inputs to outputs (pend)

98

 

 

 

SPARAMS

Set serial settings - baud rate

98

 

 

 

TAKE en

Activate or cancel all pending video/audio routes.

98

 

 

 

TPAT

Selects test pattern

99

 

 

 

WHOAREYOU

Query identity of this serial/ethernet connection

99

 

 

 

HELP

Displays a list of available commands

99

 

 

 

?

Display specific command plus parameter description

99

94

 

MatrixPRO • 8x8 DVI Router • User’s Guide

 

_K==oЙгзнЙ=`зенкзд=mкзнзЕзд

MatrixPRO Remote Commands

j~нкбсmol UсU=asf=oзмнЙк=pЙкб~д=`згг~еЗ=iблн

`ib^o

Description: Clears all existing and pending video routes.

Parameters: None

S CLEAR

ae`m==

Description: Enable/disable DHCP mode

Parameters: DHCP [mode]

Sets DHCP mode where 0=OFF, 1=CLIENT, 2=SERVER

cmil`h=en

Description: Lock/unlock the front panel from user input. Locking the front panel results in the front panel not responding to user button presses.

Parameters: en-[0|1],Disable|Enable

Query: FPLOCK? Returns the current front panel lock status if no argument is entered.

S FPLOCK 1 (Locks the front panel from the user.)

d`ib^o=grp

Description: Clears grouping information for the specified group.

Parameters:

grp Group number to clear;[1-8]

S GCLEAR 1 (Clears the grouping information in group number 1.)

d^aa=Öêé=çìí=áå

Description: Add an output and/or input to the selected group .

Note

The user cannot add output to more than one group index.

 

 

Parameters:

[GroupNum] Group number to add output;[1-8]

[OutNum] Output number to add;[1-8] /101 if no output to add[InNum] Input number to add;[1-8] /101 if no input to add

S Examples:

GADD 1 4 2 (Add output 4 and input 2 to group 1.) GADD 1 101 5 (Add input 5 to group 1.)

MatrixPRO • 8x8 DVI Router • User’s Guide

 

95

 

_K==oЙгзнЙ=`зенкзд=mкзнзЕзд

MatrixPRO Remote Commands

dabi=Öêé=çìí=áå

Description: Remove output and/or input from the selected group.

Parameters:

[GroupNum] Group number to remove output;[1-8]

[OutNum] Output number to remove;[1-8] /101 if no output to remove[InNum] Input number to remove;[1-8] /101 if no input to remove

S Examples:

GDEL 1 4 2 (Remove output 4 and input 2 from group 1.) GDEL 1 101 5 (Remove input 5 from group 1.)

fm

Description: Set or update IP AddressParameters: IP [address]

[address] - aaa.bbb.ccc.ddd, each group of number ranges from 0-255

fmfkcl

Description: Provides information regarding Ethernet:

~Server running, DHCP Server disabled

~IP Address: 192.168.0.243

~Listen Port: 23

~Subnet Mask: 255.255.255.0

il^ao==

Description: Places unit into loader mode for field upgrades.

Parameters: None.

S LOADR (Puts unit into loader mode.)

jmo`==

Description: Remote panel communication, begin command

~MPRC [Node]

lpq^q==

Description: Show output statusS OSTAT

Returns:

~FPLock 0

~Out[1]: Video 253, PVideo 253, VRoute 1, RGBMute 0

~Out[2]: Video 253, PVideo 253, VRoute 1, RGBMute 0

~etc.

96

 

MatrixPRO • 8x8 DVI Router • User’s Guide

 

_K==oЙгзнЙ=`зенкзд=mкзнзЕзд

MatrixPRO Remote Commands

kpq^q

Description: Number Ins/Outs Status

~Send the number of inputs and outputs

mopq=åìã

Description: Saves current front panel configuration/routing to a Preset location

Parameters:

out Preset number to save to; [1 - 8]

S Example: PRST 1 (Saves configuration to preset location 1.)

mpq^q

Description: Displays preset information (e.g., preset valid, which input video/ audio # routed, audio level, etc.).

Parameters:

out Preset number; [1 - 8]

Note

This parameter is optional, if no parameter exist, all preset

 

information (1-8)will be displayed.

 

 

S Examples:

PSTAT 1 (Displays preset status for preset 1)

PSTAT (Displays preset status for all presets):

Preset[1];Out[1]:Active1,Video1,VRoute1RGBMute0

Preset[1];Out[2]:Active1,Video1,VRoute1RGBMute0

etc.

obpbq

Description: Resets the systemParameters: RESET [type] <confirm>

[type] specifies type of reset, F=Factory, S=Soft

[confirm] applicable only when reset type is F. Indicates whether confirmation is desired; 0=No, 1=Yes (default)

S RESET F (Resets system to factory defaults and resets all presets.)

obs==

Description: MatrixPRO board revision and main software version information Returns:

~PCB Rev 1.0, Assembly Rev 1.0

~MatrixPro DVI Software Version

~Upper Board Fab: B, Assembly: 0

~ Lower Board Fab: B Assembly: 0

MatrixPRO • 8x8 DVI Router • User’s Guide

 

97

 

_K==oЙгзнЙ=`зенкзд=mкзнзЕзд

MatrixPRO Remote Commands

od_jrqb==

Description: Mutes the output channel, syncs remainParameters: RGBMUTE [output] [state]

Set RGB Mute to state for specified output.

omopq=åìã

Description: Recall an existing preset from a preset location and update current front panel configuration/routing. If no preset information has been saved to the preset location, no changes are made.

Parameters:

out Preset number to recall from; [1 - 8]

S RPRST 1 (Recalls configuration from preset location 1.)

oqbjm=çìí=áå

Description: Routes inputs to outputs (pend). If the output is in a group, all the outputs in the group will be routed to the input specified. If the output is in a I/O group but the input is not in the group, the command will be ignored.

Parameters:

[output] Output number; [1 - 8]

[input] Video Input number to route video;[1-8] /101 if no input to add / 0 unroutes input

Query: RTEMP? out; Returns the current video inputs routed to the specified output in the format: =in

S Examples:

RTEMP 1 3 (Route to output 1, video input 3.)

RTEMP 4 101 (Route to output 4.)

pm^o^jp

Description: Set serial settings

Parameters:

[BaudRate] Set Baud Rate: 0=2400, 1=4800, 2=9600, 3=19200, 4=38400, 5=57600, 6=115200

q^hb=Éå

Description: Activate or cancel all pending video/audio routes.

Parameters:

en Mode; [0|1], Cancel all pending|Activate all pending.

Note

 

Issuing parameter 0 is the equivalent of pressingCANCEL.

 

 

Issuing 1 is the equivalent of pressing theTAKE button.

S TAKE 1

 

 

(Activates all pending video routes.)

98

 

MatrixPRO • 8x8 DVI Router • User’s Guide

 

_K==oЙгзнЙ=`зенкзд=mкзнзЕзд

MatrixPRO Remote Commands

qm^q==

Description: Selects test pattern

Parameters: TPAT [type] Set Test Pattern to specified type

~0=H Ramp, 1=V Ramp, 2=100p Col Bars, 3=16x Grid

~4=32x Grid, 5=Burst, 6= 75p Col Bars, 7=50p Gray

~8=Gr Stp1, 9=Gr Stp2, 10=White, 11=Black

~12=Red, 13=Green, 14=Blue

tel^obvlr==

ebim

Description: Query identity of this serial/ethernet connection Returns the name of the system

Description: Displays a list of available commands on a terminal emulator such as ProComm or Hyperterminal.

Parameters: None

S Example: HELP (Returns the command list.)

\==

Description: Display specific command plus parameter description. Type command followed by ? for specific command parameters.

MatrixPRO • 8x8 DVI Router • User’s Guide

 

99

 

_K==oЙгзнЙ=`зенкзд=mкзнзЕзд

MatrixPRO Remote Commands

100

 

MatrixPRO • 8x8 DVI Router • User’s Guide