Barco 26-0503000-00 User Manual
Size:
991.7 Kb
Download

5. GUI Installation and Operation

Control GUI Installation

`зенкзд=drf=fелн~дд~нбзе

The MatrixPRO 8x8 DVI Router Control GUI is an interactive Graphical User Interface application designed to assist users with MatrixPRO operation. The software is only available via download from either the Barco Folsom website or the FTP server.

Note

The MatrixPRO Control GUI software is included within the

 

System Software” download.

 

 

The following step-by-stepinstructions will enable you to install the MatrixPRO Control GUI in a Windows® 2000 or XP PC. Use the figures for reference during the procedure.

Use the following steps to install the MatrixPRO control GUI:

Note

This procedure will not be required if you have already

 

downloaded system software — for purposes of upgrading

 

the MatrixPRO’s code. In this case, the GUI is automatically

 

installed when you run the System Software executable.

 

 

1.Verify that your PC meets all hardware and software requirements for running the GUI. These are identical to the requirements for downloading software. In Chapter 6, refer to the “Hardware Requirements” section onpage 78 and the “Software Requirements” section onpage 78 for details.

2.Download the MatrixPRO software. In Chapter 6, refer to the “Downloading Software” section onpage 79 for instructions.

3.With the download complete, navigate to the target folder and double-clicktheEXE to launch the installation shield.

4.Follow the prompts to install the upgrade package in the default folder. At the conclusion of the procedure, a new path will be created under Start > Programs > Barco Folsom.

54

 

MatrixPRO • 8x8 DVI Router • User’s Guide

 

5. GUI Installation and Operation

Control GUI Installation

5. theDouble-clickon theMatrixPRO_DVI_8x8_Rev ###.exe icon to display the

Welcome Dialog.

Figure 5-1. Welcome Dialog

6.Click Nextto display the Choose Destination Dialog:

Figure 5-2. Choose Destination Dialog

If desired, click Browse to select a different destination folder than the default.

MatrixPRO • 8x8 DVI Router • User’s Guide

 

55

 

5. GUI Installation and Operation

Control GUI Installation

7.Click Next to display theStart Installation Dialog. The setup application is now ready to install the MP Control application.

Figure 5-3. Start Installation Dialog

8.Click Next to begin installation. After successfully installing all required files to the directory as specified, theInstallation Complete Dialog appears:

Figure 5-4. Installation Complete Dialog

9.Click Finish to exit the installation setup procedure. Please note:

~The application can be reached from the Start Menu:

Start > Programs > Barco Folsom >

MatrixPRO DVI 8x8 Software #.## > MatrixPRO DVI GUI

~If desired, create a shortcut to the MatrixPRO DVI GUI on your desktop, in the normal manner.

56

 

MatrixPRO • 8x8 DVI Router • User’s Guide