Barco 12X8 User Manual

Size:
1.81 Mb
Download

MatrixPROII

MATRIX SWITCHER SERIES

USER'S GUIDE

COVERS MatrixPRO-II12X8 THROUGH 32X32 MODELS

Barco Inc. 11101-ATrade Center Drive Rancho Cordova California95670-6119USA 1.916.859.2500

26-0903105-00

2

MatrixPROII

CONTACT INFORMATION

In This Appendix

The following topics are discussed in this Appendix:

Warranty

Return Material Authorization (RMA)

Contact Information

Warranty

All video products are designed and tested to the highest quality standards and are backed by a full 3-yearparts and labor warranty. Warranties are effective upon delivery date to customer and arenon-transferable.Barco warranties are only valid to the original purchaser/owner. Warranty related repairs include parts and labor, but do not include faults resulting from user negligence, special modifications, lightning strikes, abuse (drop/crush), and/or other unusual damages.

The customer shall pay shipping charges when unit is returned for repair. Barco will cover shipping charges for return shipments to customers.

Return Material Authorization (RMA)

In the unlikely event that a product is required to return for repair, please call the following number and ask for a Sales Engineer to receive a Return Merchandise Authorization number (RMA).

(888) 414-7226

RMA Conditions are listed below:

Prior to returning any item, you must receive a Return Merchandise Authorization (RMA) number. All RMA numbers must appear on their return-shippinglabel.

RMA numbers are valid for ten (10) days from issue date.

All shipping and insurance charges on all RMAs must be prepaid by the customer

Contact Information

Barco, Inc.

11101 Trade Center Drive

Rancho Cordova, California 95670 USA

Phone: (916) 859-2500

Fax: (916) 859-2515

Website: www.barco.com

Sales Contact Information

Direct: (916) 859-2505Toll Free: (888)414-7226

E-mail:folsomsales@barco.com

Barco N.V.

Noordlaan 5

8520 Kuurne

BELGIUM

Phone: +32 56.36.82.11

Fax: +32 56.35.16.51

Website: www.barco.com

Technical Support Information

Tech Line: (866) 374-7878— 24 hours per day, 7 days per weekE-mail:folsomsupport@barco.com

MatrixPROII

3

Copyright

© Barco. February 26, 2010

All rights reserved. No part of this document may be copied, reproduced or translated. It shall not otherwise be recorded, transmitted or stored in a retrieval system without the prior written consent of Barco.

Notice

Barco provides this manual “as is” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties or merchantability and fitness for a particular purpose. Barco may make improvements and/or changes to the product(s) and/or the program(s) described in this publication at any time without notice.

This publication could contain technical inaccuracies or typographical errors. Changes are periodically made to the information in this publication; these changes are incorporated in new editions of this publication.

Federal Communications Commission (FCC) Statement

This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area may cause harmful interference, in which case the user will be responsible for correcting any interference.

Guarantee and Compensation

Barco provides a guarantee relating to perfect manufacturing as part of the legally stipulated terms of guarantee. On receipt, the purchaser must immediately inspect all delivered goods for damage incurred during transport, as well as for material and manufacturing faults Barco must be informed immediately in writing of any complaints.

The period of guarantee begins on the date of transfer of risks, in the case of special systems and software on the date of commissioning, at latest 30 days after the transfer of risks. In the event of justified notice of compliant, Barco can repair the fault or provide a replacement at its own discretion within an appropriate period. If this measure proves to be impossible or unsuccessful, the purchaser can demand a reduction in the purchase price or cancellation of the contract. All other claims, in particular those relating to compensation for direct or indirect damage, and also damage attributed to the operation of software as well as to other services provided by Barco, being a component of the system or independent service, will be deemed invalid provided the damage is not proven to be attributed to the absence of properties guaranteed in writing or due to the intent or gross negligence or part of Barco.

If the purchaser or a third party carries out modifications or repairs on goods delivered by Barco, or if the goods are handled incorrectly, in particular if the systems are commissioned operated incorrectly or if, after the transfer of risks, the goods are subject to influences not

agreed upon in the contract, all guarantee claims of the purchaser will be rendered invalid. Not included in the guarantee coverage are system failures which are attributed to programs or special electronic circuitry provided by the purchaser, e.g. interfaces. Normal wear as well as normal maintenance are not subject to the guarantee provided by Barco either.

The environmental conditions as well as the servicing and maintenance regulations specified in this manual must be complied with by the customer.

Trademarks

Brand and product names mentioned in this manual may be trademarks, registered trademarks or copyrights of their respective holders. All brand and product names mentioned in this manual serve as comments or examples and are not to be understood as advertising for the products or their manufactures.

4

MatrixPROII

Company Address

Barco Inc.

11101 Trade Center Drive

Rancho Cordova, California 95670 USA

Phone: (916) 859-2500

Fax: (916) 859-2515

Website: www.barco.com

Barco N.V.

Noordlaan 5

8520 Kuurne

BELGIUM

Phone: +32 56.36.82.11

Fax: +32 56.35.16.51

Technical Support

Customer Service Portal www.barco.com/esupport

(866) 374-7878— Events (24/7)

(866) 469-8036 — Digital Cinema (24/7)

MatrixPROII

5

Operators Safety Summary

The general safety information in this summary is for operating personnel.

Do Not Remove Covers or Panels

There are no user-serviceableparts within the unit. Removal of the top cover will expose dangerous voltages. To avoid personal injury, do not remove the top cover. Do not operate the unit without the cover installed.

Power Source

This product is intended to operate from a power source that will not apply more than 230 volts rms between the supply conductors or between both supply conductor and ground. A protective ground connection by way of grounding conductor in the power cord is essential for safe operation.

Grounding the Product

This product is grounded through the grounding conductor of the power cord. To avoid electrical shock, plug the power cord into a properly wired receptacle before connecting to the product input or output terminals. A protective-groundconnection by way of the grounding conductor in the power cord is essential for safe operation.

Use the Proper Power Cord

Use only the power cord and connector specified for your product. Use only a power cord that is in good condition. Refer cord and connector changes to qualified service personnel.

Use the Proper Fuse

To avoid fire hazard, use only the fuse having identical type, voltage rating, and current rating characteristics. Refer fuse replacement to qualified service personnel.

Do Not Operate in Explosive Atmospheres

To avoid explosion, do not operate this product in an explosive atmosphere.

6

MatrixPROII

Terms In This Manual and Equipment Marking

WARNING

Highlights an operating procedure, practice, condition, statement, etc., which, if not strictly observed, could result in injury to or death of personnel.

Note

Highlights an essential operating procedure, condition or

 

statement.

 

 

CAUTION

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

AVERTISSEMENT!

Le point d´exclamation dans un triangle equilatŽral signale à alerter l´utilisateur qu´il y a des instructions d´operation et d´entretien tres importantes dans la litŽrature qui accompagne l´appareil .

VORSICHT

Ein Ausrufungszeichen innerhalb eines gleichwinkeligen Dreiecks dient dazu, den Benutzer auf wichtige Bedienungs-undWartungsanweisungen in der Dem Great beiliegenden Literatur aufmerksam zu machen.

MatrixPROII

7

Change History

Rev

Date

ECP #

Description

Approved By

00.00

4/1/10

577375

Initial Release

R. Pellicano

01.00

4/22/10

577971

Updated feature descriptions and menus

R. Pellicano

 

 

 

 

 

 

 

 

 

 

8

MatrixPROII

TABLE OF CONTENTS

 

CONTACT INFORMATION .............................................................................................................

3

IN THIS APPENDIX...............................................................................................................................................

3

WARRANTY...........................................................................................................................................................

3

RETURN MATERIAL AUTHORIZATION (RMA) ..............................................................................................

3

CONTACT INFORMATION ..................................................................................................................................

3

OPERATORS SAFETY SUMMARY ................................................................................................

6

TERMS IN THIS MANUAL AND EQUIPMENT MARKING .....................................................

7

CHANGE HISTORY...........................................................................................................................

8

INTRODUCTION..............................................................................................................................

11

BANDWIDTH AND FREQUENCY RESPONSE ...............................................................................................

11

RGB DELAY SWITCHING .................................................................................................................................

11

PRESETS AND I/O GROUPS..............................................................................................................................

11

SPLIT MODE........................................................................................................................................................

11

STEREO AUDIO ..................................................................................................................................................

11

SERIAL AND IP CONTROL................................................................................................................................

12

FEATURES .......................................................................................................................................

12

APPLICATIONS................................................................................................................................

12

APPLICATION EXAMPLES...........................................................................................................

13

NATIVE MODE APPLICATION .........................................................................................................................

13

SPLIT MODE APPLICATION .............................................................................................................................

13

INSTALLATION ...............................................................................................................................

14

ENVIRONMENT..................................................................................................................................................

14

AUDIO INPUT WIRING......................................................................................................................................

15

AUDIO OUTPUT WIRING..................................................................................................................................

15

RJ-45LAN INTERFACE CABLING...................................................................................................................

16

RS-232REMOTE HOST PORT CABLING (DB9) .............................................................................................

16

LCD DISPLAY MENU TREE..........................................................................................................

17

UNDERSTANDING THE LCD DISPLAY......................................................................................

18

LED INDICATOR LAMP BEHAVIOR...........................................................................................

18

FRONT AND REAR PANEL VIEWS..............................................................................................

19

MatrixPROII

9

INSTALLING THE LEGEND LABEL ASSEMBLY.....................................................................

20

SETUP MODE ...................................................................................................................................

21

MAIN SETUP MENU PAGE................................................................................................................................

21

INPUT SETUP MENU PAGE...............................................................................................................................

21

OUTPUT SETUP MENU PAGE...........................................................................................................................

24

SYSTEM SETUP MENU PAGE ..........................................................................................................................

26

PRESET SETUP MENU PAGE............................................................................................................................

29

OPERATING MODE ........................................................................................................................

32

MAIN OPERATING PAGE: ................................................................................................................................

32

VOLUME HANDLING PAGE.............................................................................................................................

33

EXECUTING PRESETS.......................................................................................................................................

35

FACTORY RESET................................................................................................................................................

36

SCREENPRO-II/SCREENPRO-IICONTROLLER SETUP.......................................................

37

CONFIGURING THE SCREENPRO-II...............................................................................................................

37

SETTING UP THE SCREENPRO-IICONTROLLER .......................................................................................

37

SPECIFICATIONS............................................................................................................................

41

UPDATING SOFTWARE .................................................................................................................

43

SOFTWARE UPDATE OVERVIEW....................................................................................................................

43

HARDWARE REQUIREMENTS.........................................................................................................................

43

DOWNLOADING SOFTWARE ..........................................................................................................................

43

UPDATING MATRIXPRO-IISOFTWARE.........................................................................................................

45

10

MatrixPROII