Bakers Pride Oven BCO-G1 User Manual

PRIDE | CycloneS E R I E S |
BAKERS |
Model
SPECIFICATIONS
Door interlock switch automatically turns the fan and burners off when the oven door is open. A manual rotary switch will turn the fan on when the door is open for quick
The oven interior measures 29" wide (737mm) by 20" high (508mm) by 22 1/4" deep (567mm). The cooking chamber is porcelain enamel over heavy gauge steel with removable 11position rack guides with 1 5/8" spacing (41mm) and 5
The oven exterior measures 39" wide (991mm) by 39" deep without handles (991mm) and 41 3/8" deep with handles (1051mm) by 32" (813mm) high. Front, top, sides and trim are constructed with stainless steel. Single oven legs are 31 3/8" tall (797mm) casters and 27 5/8” (702mm) with adjustable bullet feet finished with Durable Black Powder Coating.
Dual doors are 60/40
Job ____________ Item # ___________
GAS CONVECTION OVENS G
Model
Model
STANDARD FEATURES
Energy efficient 60,000 BTUH oven combination direct/indirect forced air heat system in natural or LP gas
120v, 60hz controls
Electronic temperature control
Oven lights
150°F (65°C) to 550°F (288°C) temperature range
1/4 HP
Cool down fan mode
Porcelain enamel oven interior
5
Stainless steel front, top & sides
Black Powder Coated legs with adjustable bullet feet
Stainless steel, 60/40 split independent operation doors, with dual mounted handles
Stainless steel door seals
Stacking kit for double ovens
Front mounted, hinged control panel for easy service access
Limited
OPTIONS & ACCESSORIES
Open rack stand with rack supports
Black Powder coated legs with stainless steel undershelf
Additional oven racks
Perforated rear panel - field installation only
Oven flue
Stainless steel legs with or without casters
LP gas
International voltages, 50hz
CERTIFICATIONS
BAKERS PRIDE OVEN COMPANY, INC. 30 Pine Street, New Rochelle, NY 10801
BAKERS
Continuous product improvement is a policy of Bakers Pride Oven Company. Therefore, specifications and design are subject to change without notification

22 1/4" | NOTE: | |
Legs with | ||
567mm | ||
adjustable | ||
20" | ||
bullet feet | ||
508mm | ||
are 4 1/2" | ||
63 3/8" | ||
(140mm) | ||
(1610mm) | ||
minimum | ||
| ||
| and | |
72 1/4" | 6” | |
(1835mm) | (152mm) | |
| maximum |
31 3/8"
(797mm) | NOTE: | |
Legs with adjustable | ||
| ||
| bullet feet are 27 5/8" tall | |
| (702mm) | |
| minimum |
| 8 1/4" |
SIDE VIEW | (210mm) |
FRONT VIEW | |
| Double Unit |
41 9/16" | 39" |
(1056mm) | (991mm) |
32"
(813mm)
| 39" |
|
|
|
|
| 29" (737mm) |
|
|
| |||||
(991mm) |
|
| interior | ||||
SIDE VIEW | FRONT VIEW |
ALL DIMENSIONS NOMINAL Single Unit
SHIPPING INFORMATION
| Shipping Weight | Carton Size |
|
| Carton Dimensions |
|
| |||
Model | Lbs. | Kilos | Cubic Feet Cubic Meters |
| Width |
| Depth |
| Height | |
Inches | mm | Inches | mm | Inches | mm | |||||
|
|
|
|
565 | 256 | 39.25 1.11 | 43 1092 | 48 ¼ 1226 | 38 ¼ | 972 | |
| DOUBLE Shipped in two cartons as per above specifications |
|
|
|
GAS SUPPLY — 1/2” NPT rear connection
Gas Type | Manifold Pressure | Inlet Pressure | |||
WC | Mbar | WC | Mbar | ||
| |||||
Natural | 3.5" | 9 min | 7" | 17.5 min | |
Propane | 10" | 25 max | 11" | 27.0 min |
Separate gas connections or external manifold required for stacked ovens
POWER SUPPLY
Model | BTUH |
| KW | HZ | Voltage 1O/ | Amps |
| Wire | Phase | ||
|
|
|
|
|
|
|
|
|
|
|
|
60,000 |
| 17.58 | 60 | 120 | 3.5 |
| 2 | 1 | 900 | 1,725 | |
|
| Separate gas and electric connections required for stacked ovens |
|
|
|
|
MINIMUM CLEARANCES
| Vent Hood | Direct Venting | ||
| Inches | mm | Inches | mm |
Right | 1 | 25 | 1 | 25 |
Left | 1 | 25 | 3 | 76 |
Rear | 3 | 76 | 3 | 76 |
Suitable for installation on combustible floors when installed on factory supplied legs or casters
BAKERS PRIDE OVEN COMPANY, INC. 30 Pine Street, New Rochelle, NY 10801
BAKERS
Continuous product improvement is a policy of Bakers Pride Oven Company. Therefore, specifications and design are subject to change without notification TS: 3M 11/04