Avaya 4606 User Manual
Size:
581.76 Kb
Download

Setting L2Q Tagging Control (4601 Only)

Setting L2Q Tagging Control (4601 Only)

Use the following procedure to set the layer 2 (802.1Q) framing parameter manually for the 4601 IP Telephone only.

1.While the phone is on-hookand idle, press the following sequence of keys on the faceplate of the telephone:

Mute 8 2 4 # (Mute T A G #)

Note:

Press the Mute button momentarily. Do not press this button while pressing other keys/buttons. Pressing theHold button instead of theMute button also works.

Because it does not have a display, the 4601 IP Telephone’s Call Appearance Line indicators wink out the current NVL2Q value. Valid values are:

1=ON (enabled)

2=OFF (disabled)

3-AUTO(the default)

The single-digitvalue is represented by Call Appearance Linea, which winks the number of times represented by the current L2Q value 600 milliseconds on, 200 milliseconds off. If the current value is zero (AUTO), Call Appearance Linea’s indicator flutters five times 50 milliseconds on, 50 milliseconds off instead of winking.

After “displaying” the current L2Q value, the Message Waiting indicator at the top of the phone and the Message button LED on the faceplate flash 500 milliseconds on, 500 milliseconds off to indicate an entry is expected.

2.Enter a valid value (1, 2, or 0) for the L2Q (802.1Q) framing parameter.

The 4601 provides feedback for the digit as you enter it using Call Appearance Line a. For example, if the L2Q value is “2,” pressing the number2 on the dial pad causes Call Appearance Linea’s indicator to wink two times. Pressing “0” (zero) on the dial pad causes Call Appearance Linea’s indicator to flutter three times 50 milliseconds on, 50 milliseconds off.

Then both Message Waiting indicators flash 500 milliseconds on, 500 milliseconds off to indicate an entry is expected.

3.Press the * button to terminate the procedure, or the# button to save the new value. If you press the# button, the 4601 saves the new value, and resets the telephone to restore the user interface to its previous state.

Issue 2.2 April 2005 61

Local Administrative Options

62 4600 Series IP Telephone Release 2.2 Installation Guide