Avaya 03-300686 User Manual
Size:
2.13 Mb
Download

Installing and Connecting the MDF

and Telephones

03-300686

Issue 3

Release 5.0 January 2008

© 2008 Avaya Inc.

All Rights Reserved.

Notice

While reasonable efforts were made to ensure that the information in this document was complete and accurate at the time of printing, Avaya Inc. can assume no liability for any errors. Changes and corrections to the information in this document may be incorporated in future releases.

For full support information, please see the complete document,

Avaya Support Notices for Hardware Documentation, document number 03-600759, and the complete document,

Avaya Support Notices for Software Documentation, document number 03-600758.

To locate these document on our Web site, simply go to http://www.avaya.com/support and search for the document number in the search box.

Documentation disclaimer

Avaya Inc. is not responsible for any modifications, additions, or deletions to the original published version of this documentation unless such modifications, additions, or deletions were performed by Avaya. Customer and/or End User agree to indemnify and hold harmless Avaya, Avaya's agents, servants and employees against all claims, lawsuits, demands and judgments arising out of, or in connection with, subsequent modifications, additions or deletions to this documentation to the extent made by the Customer or End User.

Link disclaimer

Avaya Inc. is not responsible for the contents or reliability of any linked Web sites referenced elsewhere within this documentation, and Avaya does not necessarily endorse the products, services, or information described or offered within them. We cannot guarantee that these links will work all of the time and we have no control over the availability of the linked pages.

Warranty

Avaya Inc. provides a limited warranty on this product. Refer to your sales agreement to establish the terms of the limited warranty. In addition, Avaya’s standard warranty language, as well as information regarding support for this product, while under warranty, is available through the following Web site: http://www.avaya.com/support.

Copyright

Except where expressly stated otherwise, the Product is protected by copyright and other laws respecting proprietary rights. Unauthorized reproduction, transfer, and or use can be a criminal, as well as a civil, offense under the applicable law.

Avaya support

Avaya provides a telephone number for you to use to report problems or to ask questions about your product. The support telephone number

is 1-800-242-2121in the United States. For additional support telephone numbers, see the Avaya Web site:http://www.avaya.com/support.

Contents

Chapter 1: Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . .

9

Audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9

How to use this documentation . . . . . . . . . . . . . . . . . . . . . . . . . . .

9

Downloading this book and updates from the Web . . . . . . . . . . . . . .

10

Sending us comments. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

11

Related resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

11

Chapter 2: Installing the main distribution frame . . . . . . . . . . . . .

13

Physical requirements and layout . . . . . . . . . . . . . . . . . . . . . . . . . .

13

Installation space requirements . . . . . . . . . . . . . . . . . . . . . . . . .

13

Installation layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

14

Main distribution frame cross-connect fields . . . . . . . . . . . . . . . . . . . .

16

Main distribution frame hardware installation . . . . . . . . . . . . . . . . . . . .

17

Main distribution frame placement . . . . . . . . . . . . . . . . . . . . . . . . .

19

Main distribution frame labels . . . . . . . . . . . . . . . . . . . . . . . . . . . .

20

Mounting 110Aor 110P-type terminal blocks on the wall . . . . . . . . . . . . .

21

Mounting 110P-type terminal blocks on a frame . . . . . . . . . . . . . . . . . .

24

Installing Cable Slack Managers . . . . . . . . . . . . . . . . . . . . . . . . . . .

25

Chapter 3: Installing the patch panel. . . . . . . . . . . . . . . . . . . .

29

Installing patch panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

29

Cross-connecting the media gateway to the patch panels . . . . . . . . . . . . .

29

Chapter 4: Media gateway connections to the MDF. . . . . . . . . . . .

33

Equipment room cabling labels . . . . . . . . . . . . . . . . . . . . . . . . . . .

33

Cable routing guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

36

Trunk cables among network interface,

38

sneak fuse panel, and media gateway . . . . . . . . . . . . . . . . . . . . . . .

Installing cables between media gateway and MDF . . . . . . . . . . . . . . . .

38

Installing connector cables between auxiliary cabinet and MDF . . . . . . . . .

39

Chapter 5: MDF connections to stations and the

41

public switched telephone network. . . . . . . . . . . . . .

Station (telephone) wiring design . . . . . . . . . . . . . . . . . . . . . . . . . .

41

Information outlets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

41

Station cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

42

Closets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

43

Satellite locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

43

Issue 3 January 2008 3

Contents

 

Site locations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

44

Station circuit distribution from equipment room . . . . . . . . . . . . . . . . .

44

4-pair station circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

45

3-pair to 4-pair station circuit distribution . . . . . . . . . . . . . . . . . . . .

45

Connected cable station adapters . . . . . . . . . . . . . . . . . . . . . . . . . .

50

Completing a provisioning plan . . . . . . . . . . . . . . . . . . . . . . . . . . .

52

Installing sneak current and off premise protection . . . . . . . . . . . . . . . .

54

Installing sneak fuse panels . . . . . . . . . . . . . . . . . . . . . . . . . . .

57

Installing the coupled bonding conductor . . . . . . . . . . . . . . . . . . . . .

58

Installing coupled bonding conductor wires . . . . . . . . . . . . . . . . . .

58

Installing and administering the patch cord/jumper . . . . . . . . . . . . . . . .

62

Labeling expansion control carrier cable

64

(MCC1 Media Gateway only) . . . . . . . . . . . . . . . . . . . . . . . . . .

Connecting expansion control carrier outputs

65

cable (MCC1 Media Gateway only) . . . . . . . . . . . . . . . . . . . . . . .

Connecting trunk pairs using concentrator cables . . . . . . . . . . . . . . .

65

Connecting trunk pairs to media gateway

67

using jumper wires to establish 3-pair modularity . . . . . . . . . . . . . .

Chapter 6: Installing and wiring telephones and trunks . . . . . . . . .

69

Wiring telephones and trunks . . . . . . . . . . . . . . . . . . . . . . . . . . . .

69

Connecting telephones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

70

Connectable telephones and consoles . . . . . . . . . . . . . . . . . . . . .

70

Connecting a typical telephone . . . . . . . . . . . . . . . . . . . . . . . . .

73

Connecting adjunct power . . . . . . . . . . . . . . . . . . . . . . . . . . . .

74

Connecting an analog station or 2-wire digital station . . . . . . . . . . . . .

75

Analog tie trunk example . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

76

Digital tie trunk example . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

77

DS1 tie trunk example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

78

Collocated DS1 interface trunks . . . . . . . . . . . . . . . . . . . . . . . . .

78

DS1 interface trunks using T1 channel service unit. . . . . . . . . . . . . . .

79

Auxiliary connector outputs (MCC1 and SCC1

81

Media Gateways only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Three-pair and four-pair modularity . . . . . . . . . . . . . . . . . . . . . . . . .

84

Adjunct power connection locations . . . . . . . . . . . . . . . . . . . . . . . .

85

Attendant console example . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

86

Attendant console cabling distances, local

86

and phantom power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Auxiliary power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

86

Hard-wire bridging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

87

4 Installing and Connecting the MDF and Telephones

 

Contents

Dual wiring of 2-wire and 4-wire endpoints . . . . . . . . . . . . . . . . . . .

87

Installing the attendant console . . . . . . . . . . . . . . . . . . . . . . . . .

87

Installing the 26B1 Selector Console . . . . . . . . . . . . . . . . . . . . . .

88

Connecting external alarm indicators and auxiliary power . . . . . . . . . . . .

88

Installing off-premises station wiring . . . . . . . . . . . . . . . . . . . . . . . .

90

Off-premises or out-of-building stations . . . . . . . . . . . . . . . . . . . . . .

91

Off-premises connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

91

Off-premises protection requirements . . . . . . . . . . . . . . . . . . . . .

93

Telephone restrictions for exposed environments . . . . . . . . . . . . . . .

94

Digital Out-of-Building Telephone Protection . . . . . . . . . . . . . . . . . .

94

Installing the ITW Linx Enhanced Protector . . . . . . . . . . . . . . . . .

95

Installing the 4C3S-75 Enhanced Protector . . . . . . . . . . . . . . . . .

95

Installing the data link protector . . . . . . . . . . . . . . . . . . . . . . .

95

Emergency transfer units and associated telephones . . . . . . . . . . . . . . .

96

808A Emergency Transfer Panel and

97

telephone installation examples . . . . . . . . . . . . . . . . . . . . . . . . . .

Installing the 808A Emergency Transfer Panel . . . . . . . . . . . . . . . . .

99

Installing telephones used only for

104

emergency transfer (trunk/auxiliary field) . . . . . . . . . . . . . . . . . . .

Installing telephones used for emergency

105

transfer and as normal extension (trunk/auxiliary field) . . . . . . . . . . .

Installing external ringing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

106

Installing the queue warning indicator . . . . . . . . . . . . . . . . . . . . . . .

107

Chapter 7: Installing and wiring telephone power supplies . . . . . . .

109

1145B2 power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

109

Important warning for 1145B2 power supply . . . . . . . . . . . . . . . . . .

110

Mounting the 1145B2/1146B2 power supply . . . . . . . . . . . . . . . . . .

111

Installing the wall-mounting plates . . . . . . . . . . . . . . . . . . . . . . .

114

Mounting the 1146B2 Power Distribution Unit . . . . . . . . . . . . . . . . .

114

Installing the battery mounting/wiring . . . . . . . . . . . . . . . . . . . . . .

115

Installing the expanded power distribution unit . . . . . . . . . . . . . . . .

115

Powering up and testing the power supply . . . . . . . . . . . . . . . . . . .

116

Wiring the 1146B2 Power Distribution Unit . . . . . . . . . . . . . . . . . . .

117

Resetting LEDs on power distribution unit . . . . . . . . . . . . . . . . . . .

118

1152A1 Mid-Span Power Distribution Unit . . . . . . . . . . . . . . . . . . . . . .

119

Important safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . .

119

Using the 1152A1 Power Distribution Unit . . . . . . . . . . . . . . . . . . . .

120

Connecting the 1152A1 Power Distribution Unit . . . . . . . . . . . . . . . .

120

Connecting the cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

121

Issue 3 January 2008 5

Contents

 

Connecting cables to telephones and other end devices. . . . . . . . . .

122

1152B Mid-Span Power Distribution Units . . . . . . . . . . . . . . . . . . . . . .

123

Important 1152B PDU Safety Instructions . . . . . . . . . . . . . . . . . . . .

124

Using the 1152B PDUs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

125

Connecting the 1152B PDU cables . . . . . . . . . . . . . . . . . . . . . . . .

125

Connecting cables to telephones and other end devices. . . . . . . . . . . .

126

C360 converged stackable switches . . . . . . . . . . . . . . . . . . . . . . . . .

128

C360 switch important safety instructions. . . . . . . . . . . . . . . . . . . .

128

Using the C360 switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

129

Connecting the C360 stackable switches . . . . . . . . . . . . . . . . . . . .

130

Connecting the cables. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

131

1151B1 and 1151B2 Power Supplies . . . . . . . . . . . . . . . . . . . . . . . . .

131

Important safety instructions for 1151B1 and

132

1151B2 Power Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Using 1151B1 and 1151B2 Power Supplies . . . . . . . . . . . . . . . . . . .

132

Connecting the 1151B1 or 1151B2 Power Supplies . . . . . . . . . . . . . .

133

Chapter 8: Testing the complete configuration . . . . . . . . . . . . . .

135

Testing port network equipment . . . . . . . . . . . . . . . . . . . . . . . . . . .

136

Checking port network status for each media gateway . . . . . . . . . . . .

136

Checking circuit pack configuration . . . . . . . . . . . . . . . . . . . . . . .

137

Testing the TN2312BP Internet Protocol

138

Server Interface circuit pack . . . . . . . . . . . . . . . . . . . . . . . . . .

Testing Expansion Interface circuit packs, if used . . . . . . . . . . . . . . .

139

Testing time division multiplexing bus for each port network . . . . . . . . .

140

Testing expansion interface exchange, if used, for each port network . . . .

141

Testing telephones and other equipment . . . . . . . . . . . . . . . . . . . . . .

142

Making test calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

143

Testing 302C attendant console . . . . . . . . . . . . . . . . . . . . . . . . .

143

Testing selector console . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

144

Testing external ringing . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

144

Testing queue warning indicator . . . . . . . . . . . . . . . . . . . . . . . . .

144

Testing integrated announcement . . . . . . . . . . . . . . . . . . . . . . . .

144

Record an announcement . . . . . . . . . . . . . . . . . . . . . . . . . .

145

Playback announcement . . . . . . . . . . . . . . . . . . . . . . . . . . .

145

Delete announcement . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

145

Testing music-on-hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

145

Testing emergency transfer (Avaya S8700 Multi-Connect only) . . . . . . . .

145

Testing terminating trunk transmission . . . . . . . . . . . . . . . . . . . . .

146

Testing connectivity to the LAN . . . . . . . . . . . . . . . . . . . . . . . . .

147

6 Installing and Connecting the MDF and Telephones

 

 

Contents

LED indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

147

 

Telephone console LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

148

 

Attendant console LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . .

148

 

Terminal alarm notification . . . . . . . . . . . . . . . . . . . . . . . . . .

148

 

DS1 Converter circuit pack LEDs . . . . . . . . . . . . . . . . . . . . . . . .

148

 

SPAN LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

150

Index

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

151

Issue 3 January 2008 7

Contents

8 Installing and Connecting the MDF and Telephones