Avanti BD7000 User Manual
MANUAL DE INSTRUCCIONES
Model Number/ No. De Modelo: BD7000
Dispensador / Enfriador de Cerveza
BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS.
La sección en español empieza en la página 23.
Avanti has a policy of continuous improvement on its products and reserves the right to change materials and specifications without notice.
Avanti Products, A Division of The Mackle Co., Inc.
P.O. Box 520604 - Miami, Florida 33152
Table of Contents
Help Us Help You
Parts and Features
6 – 7
Important Safety Instructions
Before Using Your Appliance
Installation of Your Appliance
Reversing the Door Swing of Your Appliance
Installing and Assembling Your Appliance
10 – 14
Converting Your Beer Dispenser to an
Operating Your Appliance
Defrosting Your Appliance
Care and Maintenance
Cleaning Your Appliance
Moving Your Appliance
Draught Beer Trouble Guide
16 – 20
Service for Your Appliance
Your Avanti Products Warranty
Instrucciones en Español
23 – 33
Registration Information and Registration Card
BEER DISPENSER SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual for your appliance. Always read and obey all safety messages.
This is the Safety Alert Symbol. This symbol alerts you to potential hazards that can kill or injure you and others. All safety messages will follow the Safety Alert Symbol and either the words” DANGER”, “WARNING” or “CAUTION”.
Danger means that failure to heed this safety statement may result in severe personal injury or death.
Warning means that failure to heed this safety statement may result in extensive product damage, serious personal injury, or death.
Caution means that failure to heed this safety statement may result in minor or moderate personal injury, property or equipment damage.
All safety messages will alert to know what potential hazard is, tell you how to reduce the chance of injury, and let you know what can happen if the instructions are not followed.
Before the appliance is used, it must be properly positioned and installed as described in this manual,so read the manual carefully. To reduce the risk of fire, electrical shock or injury when using the appliance, follow basic precaution, including the following:
Plug into a grounded
Replace all panels before operating.
It is recommended that a separate circuit, serving only your appliance be provided. Use receptacles that cannot be turned off by a switch or pull chain.
Never clean appliance parts with flammable fluids. These fumes can create a fire hazard or explosion. And do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. The fumes can create a fire hazard or explosion.
Before proceeding with cleaning and maintenance operations, make sure the power line of the unit is disconnected.
Do not connect or disconnect the electric plug when your hands are wet.
Unplug the appliance or disconnect power before cleaning or servicing. Failure to do so can result in electrical shock or death.
Do not attempt to repair or replace any part of your appliance unless it is specifically recommended in this manual. All other servicing should be referred to a qualified technician.
FOLLOW WARNING CALL OUTS BELOW ONLY WHEN APPLICABLE TO YOUR MODEL
Use two or more people to move and install appliance. Failure to do so can result in back or other injury.
To ensure proper ventilation for your appliance, the front of the unit must be completely unobstructed. Choose a
The appliance should not be located next to ovens, grills or other sources of high heat.
The appliance must be installed with all electrical, water and drain connections in accordance with state and local codes. A standard electrical supply (115 V AC only, 60 Hz), properly grounded in accordance with the National Electrical Code and local codes and ordinances is required.
Do not kink or pinch the power supply cord of appliance.
The fuse (or circuit breaker) size should be 15 amperes.
It is important for the appliance to be leveled in order to work properly. You may need to make several adjustments to level it.
All installation must be in accordance with local plumbing code requirements.
Make certain that the pipes are not pinched or kinked or damaged during installations.
Check for leaks after connection.
Never allow children to operate, play with or crawl inside the appliance.
If you use the drainage container, you must set the drain select switch to OFF or the water can overflow from the drainage container
Although the unit has been tested at the factory, due to
Do not use
Do not use this apparatus for other than its intended purpose.
HELP US HELP YOU...
Read this guide carefully.
It is intended to help you operate and maintain your new Beer Dispenser properly.
Keep it handy to answer your questions.
If you don't understand something or you need more assistance, please call:
Avanti Customer Service
Keep proof of original purchase date (such as your sales slip) with this guide to establish the warranty period.
THIS BEER DISPENSER IS NOT DESIGNED FOR THE STORAGE OF MEDICINE OR OTHER MEDICAL PRODUCTS.
Write down the model and serial numbers.
You'll find them on a plate located on the rear wall of the Beer Dispenser.
Please write these numbers here:
Date of Purchase
Use these numbers in any correspondence or service calls concerning your Beer Dispenser.
If you received a damaged Beer Dispenser, immediately contact the dealer (or builder) that sold you the Beer Dispenser.
Save time and money. Before you call for service, check the Troubleshooting Guide. It lists causes of minor operating problems that you can correct yourself.
IF YOU NEED SERVICE
We're proud of our service and want you to be pleased. If for some reason you are not happy with the service you receive, here are some steps to follow for further assistance.
FIRST, contact the people who serviced your Beer Dispenser. Explain why you are not pleased. In most cases, this will solve the problem.
NEXT, if you are still not pleased, write all the details, including your telephone number, and send to:
10880 NW 30 Street
Miami, FL 33172 USA
PARTS AND FEATURES
Stainless Steel Door
Safety Guard Rail
CO2 Tank Holder
Adjustable Temperature Control
Keg Support Plate
PARTS / ACCESSORIES - DETAILED
Back Flow Stopper
CO2 Rubber Directional Washer
5. Beer Tower Washer
6. Beer Tower Tap/Beer Hose Assembly
High Pressure Washer
9. CO2 Tank Valve
Drip Pan Top
Keg Support Plate
Caster with Brake
(Optional – Sold Separately)
(Optional – Sold Separately)
18. CO2 Tank Strap
19. Air hose Wing Nut Washer
Air Hose Connector Washer
22. Beer Tap Wrench
24. Beer Tower Hole Cover
Extra Washers (3, 4, 8, 19, 21)
IMPORTANT SAFETY INSTRUCTIONS
To reduce the risk of fire, electrical shock, or injury when using
your Beer Dispenser, follow these basic precautions:
Read all instructions before using the unit.
DANGER or WARNING: Risk of child entrapment.
Child entrapment and suffocation are not problems of the past. Junked or abandoned appliances are still dangerous . . . even if they will “just sit in the garage a few days”.
Before you throw away your old unit: Take off the door. Leave the shelves in place so that children may not easily climb inside.
Never allow children to operate, play with, or crawl inside the unit.
Never clean unit parts with flammable fluids. The fumes can create a fire hazard or explosion.
Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any other unit. The fumes can create a fire hazard or explosion.
Before Using Your Beer Dispenser
Remove the exterior and interior packing.
Check to be sure you have all of the following parts:
Beer Keg Coupler (Sankey Tap)
Safety Guard Rail
Keg Coupler Sealing Rings (Plastic Bag)
Drip Tray Assembly (Two pieces)
Metal Wrench for Faucet installation
Beer Keg Support Plate (Plastic)
Steel Clamp for Hose (RED) installation
Refrigerator Shelves (Wire)
Beer Hose (Clear) with Sankey connector
Beer Tower Assembly
CO2 Tank and Accessories
– CO2 Cylinder / Tank (Empty)
– Pull Handle (Black)
Cylinder / Tank Cushion
– Tower Top Cover (Plastic)
– Mylar Washer
Air Hose (Red) with connector
– Faucet Sealing Rings (Plastic Bag)
Cylinder / Tank – Holder / Fastener
Before connecting the Beer Dispenser to the power source, let it stand upright for approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.
Clean the interior surface with lukewarm water using a soft cloth.
Installation of Your Beer Dispenser
This appliance is designed to be free standing indoor use only, and should not be recessed or
Place your Beer Dispenser on a floor that is strong enough to support the Beer Dispenser when it is fully loaded.
Allow 5 inches of space between the back and sides of the Beer Dispenser, which allows the proper air circulation to cool the compressor and condenser.
Locate the Beer Dispenser away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Extreme cold ambient temperatures may also cause the Beer Dispenser not to perform properly.
Avoid locating the Beer Dispenser in moist areas.
Plug the Beer Dispenser into an exclusive, properly
questions concerning power and or grounding should be directed toward a certified electrician or an authorized Avanti Products service center.
After plugging the appliance into a wall outlet, allow the unit to cool down for
Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is damaged, have it replaced by an authorized Avanti Products service center.
This appliance should be properly grounded for your safety. The power cord of this appliance is equipped with a
Do not under any circumstances cut or remove the third ground prong from the power cord supplied. For personal safety, this appliance must be properly grounded.
This appliance requires a standard 115/120 Volt AC ~/60Hz electrical ground outlet with
The cord should be secured behind the appliance and not left exposed or dangling to prevent accidental injury.
The appliance should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating label on the appliance. This provides the best performance and also prevent overloading house wiring circuits that could cause a fire hazard from overheated. Never unplug the appliance by pulling the power cord. Always grip the plug firmly and pull straight out from the receptacle. Repair or replace immediately all power cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end. When moving the appliance, be careful not to damage the power cord.
Because of potential safety hazards under certain conditions, it is strongly recommended that you do not use an extension cord with this appliance. However, if you must use an extension cord it is absolutely necessary that it be a
Most electrical appliances use a series of electric control boards to operate. These boards are very susceptible to power surges and could be damaged or destroyed.
If the appliance is going to be used in an area or if your city / country is prone to power surges / outages; it is suggested that you use a power surge protector for all electrical devices / appliances you use. The surge protector that you select must have a surge block high enough to protect the appliance it is connected to. If you have any questions regarding the type and size of surge protector needed contact a licensed electrician in your area.
Damages due to power surges are not considered a manufacturer covered defect and will void your product warranty.
Reversing the Door Swing of Your Appliance
This appliance has the capability of the door opening from either the left or right side. The unit is delivered to you with the door opening from the left side. Should you desire to reverse the opening direction, please call service for reversal instructions.
INSTALLING AND ASSEMBLING YOUR APPLIANCE
Casters with Brake (OPTIONAL ACCESSORIES) Installation
THESE CASTERS ARE NOT INCLUDED WITH YOUR UNIT.
Casters can be ordered from the Avanti Parts and Service Department at
Install the four casters with lock provided into the unit’s bottom (four screw holes
Figure (I): Before Installation
Figure (II): After Installation
CO2 GAS CAN BE DANGEROUS
WARNING: CO2 cylinders contain
1.ALWAYS connect the CO2 cylinder to a regulator. Failure to do so could result in explosion with possible death or injury when the cylinder valve is opened.
2.NEVER connect the CO2 cylinder directly to the product container.
3.ALWAYS follow correct procedures when cylinders are changed.
4.ALWAYS secure the cylinder in an upright position.
5.NEVER drop or throw a CO2 cylinder.
6.ALWAYS keep a CO2 cylinder away from heat. Store extra cylinders in a cool place (preferably 70°F). Securely fasten with a chain in an upright position when storing.
7.ALWAYS ventilate and leave the area immediately if CO2 leakage has occurred.
8.ALWAYS check the D.O.T. test date on the cylinder neck before installation. If over five (5) years, do not use, return cylinder to gas supplier.
9.NEVER connect a product container unless there are two (2) safety’s in the pressure system:
a.One at or on the CO2 regulator
b.One at or on the product coupler or in the pressure gas line.