Avanti BCAD680 User Manual
BEVERAGE CENTER / ENFRIADOR DE REFRESCOS
MANUAL DE INSTRUCCIONES
Model Number / No. de Modelo:
BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS.
La sección en español empieza en la página 18.
Avanti Products has a policy of continuous improvement on its products and reserves the right to change materials and specifications without notice.
Avanti Products, A Division of The Mackle Co., Inc.
P.O. Box 520604 - Miami, Florida 33152
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages .
This is the Safety Alert Symbol. This symbol alerts you to potential hazards that can kill or injure you and others. All safety messages will follow the Safety Alert Symbol and either the words” DANGER”, “WARNING” or “CAUTION”.
Danger means that failure to heed this safety statement may result in severe personal injury or death.
Warning means that failure to heed this safety statement may result in extensive product damage, serious personal injury, or death.
Caution means that failure to heed this safety statement may result in minor or moderate personal injury, or property or equipment damage.
All safety messages will alert you to know what the potential hazard is, tell you how to reduce the chance of injury, and let you know what can happen if the instructions are not followed.
Before the appliance is used, it must be properly positioned and installed as described in this manual, so read the manual carefully. To reduce the risk of fire, electrical shock or injury when using the appliance, follow basic precaution, including the following:
?Plug into a grounded 3
?Replace all panels before operating .
?It is recommended that a separate circuit, serving only your appliance be provided. Use receptacles that cannot be turned off by a switch or pull chain.
?Never clean appliance parts with flammable fluids. These fumes can create a fire hazard or explosion. And do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. The fumes can create a fire hazar d or explosion.
?Before proceeding with cleaning and maintenance operations, make sure the power line of the unit is disconnected.
?Do not connect or disconnect the electric plug when your hands are wet.
?Unplug the appliance or disconnect power before cleani ng or servicing. Failure to do so can result in electrical shock or death.
?Do not attempt to repair or replace any part of your appliance unless it is specifically recommended in thismanual. All other servicing should be referred to a qualified technician .
FOLLOW WARNING CALL OUTS BELOW ONLY WHEN APPLICABLE TO YOUR MODEL
?Use two or more people to move and install appliance. Failure to do so can result in back or other injury.
?To ensure proper ventilation for your appliance, the front of the unit must be completely unobstructed. Choose a well
?The appliance should not be located next to ovens, grills or other sources of high heat.
?The appliance must be installed with all electrical, water and drain connections in accordance with state and local codes. A standard electrical supply (115 V AC only, 60 Hz), properly grounded in accordance with the National Electrical Code and local codes and ordinances is required.
?Do not kink or pinch the power supply cord of appliance.
?The fuse (or circuit breaker) size should be 15 amperes.
?It is important for the appliance to be leveled in order to work properly. You may need to make several adjustments to level it.
?All installation must be in accordance with local plumbing code requirements.
?Make certain that the pipes are not pinched or kinked or damaged during installations .
?Check for leaks after connection.
?Never allow children to operate, play with or crawl inside theappliance.
?Although the unit has been tested at the factory, due to
?Do not use
?Do not use this apparatus for other than its intended purpose.
Thank you for purchasing this fine Avanti products. Please fill out this form and return it within 100 days of purchase and receive these important benefits to the following address:
Avanti Products, A Division of The Mackle Co., Inc.
P.O. Box 520604Miami, Florida 33152 USA
? Protect your product:
We will keep the model number and date of purchase of your new Avanti Products product on file to help you refer to this information in the event of an insurance claim such as fire or theft.
? Promote better products:
We value your input. Your responses will help us develop products designed to best meet your future needs.
Avanti Registration Form
City State Zip
Area Code Phone Number
Did You Purchase An Additional Warranty:
Reason For Choosing This Avanti Product:
Please indicate the most important factors that influenced your decision to purchase this product.
?Avanti Products Reputation?Product Quality?Salesperson Recommendation
Model # Serial #
Date Purchased Store/Dealer Name
As Your Primary Residence, Do You:
Is This Product Used In The:
How Did You Learn About This Product:
?In Store Demo
HELP US HELP YOU...
Read this guide carefully.
It is intended to help you operate and maintain your new beverage center properly.
Keep it handy to answer your questions. If you don't understand something or you need more assistance, please call:
Avanti Customer Service
Keep proof of original purchase date (such as your sales slip) with this guide to establish the warranty period.
THIS BEVERAGE CENTER IS NOT DESIGNED FOR THE STORAGE OF MEDICINE OR OTHER MEDICAL PRODUCTS.
Write down the model and serial numbers.
You'll find them on a plate located on the rear outside wall of the beverage center.
Please write these numbers here:
Date of Purchase
Use these numbers in any correspondence or service calls concerning your beverage center .
If you received a damaged beverage center , immediately contact the dealer (or builder) that sold you the beverage center.
Save time and money. Before you call for service, check the Troubleshooting Guide. It lists causes of minor operating problems that you can correct yourself.
IF YOU NEED SERVICE
We're proud of our service and want you to be pleased. If for some reason you are not happy with the service you receive, here are some steps to follow for further assistance.
FIRST, contact the people who serviced your beverage center. Explain why you are not pleased. In most cases, this will solve the problem.
NEXT, if you are still not pleased, write all the details, including your telephone number, and send it to:
10880 NW 30 Street
Miami, FL 33172 USA
PARTS & FEATURES
2.DIGITAL CONTROL PANEL
4.SHELVES (TOTAL 5)
7.REAR CASTERS WITHOUT BRAKES (2)
9.FRONT CASTERS WITH BRAKES (2)
11.RIGHT UPPER HINGE
TABLE OF CONTENTS
Registration Information ________________________________________________________ 4 Help Us Help You…_____________________________________________________________ 6 Parts And Features _____________________________________________________________ 7 Important Safety Instructions ____________________________________________________ 9 Installation Instructions _________________________________________________________ 9 Before Using Your Beverage Center ______________________________________________ 9 Installing Your Beverage Center __________________________________________________ 9 Electrical Connection __________________________________________________________ 10
Reversing The Door Swing Of Your Appliance
Operating Your Beverage Center ________________________________________________ 10 Setting The Temperature Control _______________________________________________ 11
Care And Maintenance
Replacing Your Fluorescent Light
Cleaning Your Beverage Center
Vacation Time_________________________________________________________________ 13
Moving Your Beverage Cooler
Energy Saving Tips____________________________________________________________ 13
Troubleshooting Guide ________________________________________________________ 14 Service For Your Beverage Center_______________________________________________ 15 Your Product Warranty_________________________________________________________ 16 Wiring Diagram _______________________________________________________________ 17 INSTRUCCIONES EN ESPAÑOL______________________________________________18~20
IMPORTANT SAFETY INSTRUCTIONS
?WARNING? To reduce the risk of fire, electrical shock, or injury when using your appliance, follow these basic precautions:
?Read all instructions before using the beverage center.
?DANGER or WARNING: Risk of child entrapment.
Child entrapment and suffocation are not problems of the past. Junked or abandoned appliances are still dangerous . . . even if they will “just sit in the garage a few days”.
?Before you throw away your old beverage center: Take off the door. Leave the shelves in place so that children may not easily climb inside.
?Never allow children to operate, play with, or crawl inside the appliance.
?Never clean appliance parts with flammable fluids. The fumes can create a fire hazard or explosion.
?Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any other appliance. The fumes can create a fire hazard or explosion.
?Before Using Your Beverage Center
?Remove the exterior and interior packing. Read the Installer’s directions.
?Check to be sure you have all of the following parts:
?1 Left Upper Door Hinge for Door Opening from the Right Side
?1 Instruction Manual
?Before connecting the beverage center to the power source, let it stand upright for approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.
?Clean the interior surface with lukewarm water using a soft cloth.
?Installation of Your Beverage Center
?This appliance is designed to be free standing installation only, and should not be recessed or
?Place your beverage center on a floor that is strong enough to support it when it is fully loaded.
?Locate the beverage center away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Extreme cold ambient temperatures may also cause the unit not to perform properly.
?Avoid locating the unit in moist areas.
?Plug the beverage center into an exclusive, properly
? Electrical Connection
Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is damaged, have it replaced by an authorized Avanti Products service center.
This appliance should be properly grounded for your safety. The power cord of this appliance is equipped with a
Do not under any circumstances cut or remove the third ground prong from the power cord supplied. For personal safety, this appliance must be properly grounded.
This appliance requires a standard 115/120 Volt AC ~/60Hz electrical ground outlet with
The cord should be secured behind the appliance and not left exposed or dangling to prevent accidental injury.
The appliance should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating label on the appliance. This provides the best performance and also prevent overloading house wiring circuits that could cause a fire hazard from overheated. Never unplug the appliance by pulling the power cord. Always grip the plug firmly and pull straight out from the receptacle. Repair or replace immediately all power cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end. When moving the applianc e, be careful not to damage the power cord.
Because of potential safety hazards under certain conditions, it is strongly recommended that you do not use an extension cord with this appliance. However, if you must use an extension cord it is absolutely necessary that it be a
? Reversing the Door Swing of Your Appliance
This appliance has the capability of the door opening from either the left or right side. The unit is delivered to you with the door opening from the left side. Should you desire to reverse the opening direction, please call service for reversal instructions.
OPERATING YOUR BEVERAGE CENTER
It is recommended you install the Beverage Center in a place where the ambient temperature is between
Also, there is temperature variance between the top and bottom shelves of the appliance.
Do not store food in Beverage Center, as interior temperature may not get cool enough to prevent spoilage.
As a natural result of condensation, in summer months or areas of high humidity, the glass door may build up moisture on the outside. Just wipe it away.
?Setting the Temperature Control
?You can set the temperature as you desire by pushing the UP orDOWN button. When you push
the two buttons for the first time, the LED readout will show the original tempe rature set at previous time (the temperature preset at the factory is 38ºF).
?The temperature that you desire to set will increase 1ºF or 1ºC if you push the UP button once, on
the contrary the temperature will decrease 1ºF or 1ºC if you push the DOWN butto n once.
?The range of the temperature control is from 34 ºF to 43ºF.
?You can select temperature display setting from Fahrenheit to Celsius degree by pushing the UP andDOWN button at the same time for 5 seconds . Fahrenheit and Celsius degrees indicator will appear in green color in the “SET” window.
?The temperature inside the unit will be appear in red color in the “DISPLAY” window.
?If the unit is unplugged, power lost, or is turned off, you must wait 3 to 5 minutes before restarting the unit. If you attempt to restart before this time delay, the appliance will not start.
The light switch is located on the right of control panel. You can turn the interior light ON or OFF by pressing the light switch.
? Door Lock
Your unit is provided with a lock and key combination.
The keys are located inside the plastic bag that contains the User’s Guide. Insert the key into the lock and turn it counterclockwise to unlock the door. To lock the door do the reverse operation making sure metal pin is engaged completely. Remove the key and place it in a secure place for safekeeping.
?To prevent damaging the door gasket, make sure to have the door all the way opened when pulling shelves out of the rail compartment.
?For easy access to the storage content, you must pull the shelves approximately 1/3 out of the rail compartment, however this unit was designed with a plastic post on each sides of the shelf tracks to prevent bottles from falling.