Avanti BCA886 User Manual
MANUAL DE INSTRUCCIONES
Model Number / No. de Modelo:
BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS.
La sección en español empieza en la página 17.
Avanti has a policy of continuous improvement on its products and reserves the right to change materials and specifications without notice.
Avanti Products, A Division of the Mackle Co., Inc.
P.O. Box 520604Miami, Florida 33152
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual for your appliance. Always read and obey all safety messages.
This is the Safety Alert Symbol. This symbol alerts you to potential hazards that can kill or injure you and others. All safety messages will follow the Safety Alert Symbol and either the words” DANGER”, “WARNING” or “CAUTION”.
Danger means that failure to heed this safety statement may result in severe personal injury or death.
Warning means that failure to heed this safety statement may result in extensive product damage, serious personal injury, or death.
Caution means that failure to heed this safety statement may result in minor or moderate personal injury, property or equipment damage.
All safety messages will alert you to know what potential hazard is, tell you how to reduce the chance of injury, and let you know what c an happen if the instructions are not followed.
Before the refrigerator is used, it must be properly positioned and installed as described in this manual,so read the manual carefully. To reduce the risk of fire, electrical shock or injury when using the refrigerator, follow basic precaution, including the following:
?Plug into a grounded 3
?It is recommended that a separate circuit, serving only your refrigerator be provided. Use receptacles that cannot be turned off by a switch or pull chain.
?Never clean refrigerator parts with flammable fluids. These fumes can create a fir e hazard o r explosion. And do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. The fumes can create a fire hazard or explosion.
?Before proceeding with cleaning and maintenance operations, make sure the power line of the unit is disconnected.
?Do not connect or disconnect the electric plug when your hands are wet.
?Unplug the refrigerator or disconnect power before cleaning or servicing. Failure to do so can result in electrical shock or death.
?Do not attempt to repair or replace any part of your refrigerator unless it is specifically recommended in this manual. All other servicing should be referred to a qualified technician.
FOLLOW WARNING CALL OUTS BELOW ONLY WHEN APPLICABLE TO YOUR MODEL
?Use two or more people to move and install refrigerator. Failure to do so can result in back or other injury.
?To ensure proper ventilation for your refrigerator, the front of the unit must be completely unobstructed. Choose a well
?The refrigerator should not be located next to ovens, grills or other sources of high heat.
?The refrigerator must be installed with all electrical, water and drain connections in accordance with state and local codes. A standard electrical supply (115 V AC only, 60 Hz), properly grounded in accordance with the National Electrical Code and local codes a nd ordinances is required.
?Do not kink or pinch the power supply cord of refrigerator.
?The fuse (or circuit breaker) size should be 15 amperes.
?It is important for the refrigerator to be leveled in order to work properly. You may need to make several adjus tments to level it.
?All installation must be in accordance with local plumbing code requirements.
?Make certain that the pipes are not pinched or kinked or damaged during installations .
?Check for leaks after connection.
?Never allow children to operate, play with or crawl inside the refrigerator.
?Although the unit has been tested at the factory, due to
?Do not use
?Do not use this apparatus for other than its intended purpose.
Thank you for purchasing this fine Avanti product. Please fill out this form and return it within 100 days from the date of purchase and receive thes e important benefits to the following address:
Avanti Products, A Division of The Mackle Co., Inc.
P.O.Box 520604 – Miami, Florida 33152
? Protect your product:
We will keep this form, with the model number and date of purchase of your new Avanti product on file to help you refer to this information in the event of an insurance claim such as fire or theft.
?Promote better products:
We value your input. Your responses will help us develop products designed to best meet your future needs.
Avanti Registration Form
Did You Purchase An Additional Warranty:
Reason For Choosing This Avanti Product:
Please indicate the most important factors that influenced your decision to purchase this product.
?Avanti Reputation?Product Quality
?Salesperson Recommendation?Friend/Relative Recommendation?Warranty?Other_______________________
Model # Serial #
Date Purchased Store/Dealer Name
As Your Primary Residence, Do You:
Is This Product Used In The:
How Did You Learn About This Product:
?In Store Demo
HELP US HELP YOU...
Read this guide carefully.
It is intended to help you operate and maintain your new unit properly.
Keep it handy to ans wer your questions.
If you don't understand something or you need more assistance, please call:
Avanti Customer Service
Keep proof of original purchase date (such as your sales slip) with this guide to establish the warranty period.
THIS UNIT IS NOT DESIGNED FOR THE STORAGE OF MEDICINE OR OTHER MEDICAL PRODUCTS.
Write down the model and serial numbers.
You'll find them on a plate located on the rear outside wall of the unit.
Please write these numbers here:
Date of Purchase
Use these numbers in any correspondence or service calls concerning your unit.
If you received a damaged unit, immediately contact the dealer (or builder) that sold you the unit.
Save time and money. Before you call for service, check the Troubleshooting Guide. It lists causes of minor operating problems that you can correct yourself.
IF YOU NEED SERVICE
We're proud of our service and want you to be pleased. If for some reason you are not happy with the service you receive, here are some steps to follow for further assistance.
FIRST, contact the people who serviced your unit. Explain why you are not pleased. In most cases, this will solve the problem.
NEXT, if you are still not pleased, write all the details, including your telephone number, and send it to:
10880 NW 30 Street
Miami, FL 33172 USA
PARTS & FEATURES
1Temperature Control and Light
2Glass Shelves (5)
3Glass Crisper Cover
5Leveling Legs (2)
6Egg Trays (2)
7Door Bins (4)
9Bottle Door Bin
TABLE OF CONTENTS
Registration Information and Registration Card
Help Us Help You
Parts and Features
Important Safety Instructions
Before Using Your Appliance
Installation of Your Appliance
Reversing the Door Swing of Your Appliance
Operating Your Appliance
Care and Maintenance
Cleaning Your Appliance
Moving Your Appliance
Energy Saving Tips
Changing the Light bulb
Service for Your Appliance
Your Avanti Products Warranty
Instrucciones en Español
IMPORTANT SAFETY INSTRUCTIONS
?WARNING? To reduce the risk of fire, electrical shock, or injury when using your appliance, follow these basic precautions:
?Read all instructions before using the appliance.
?DANGER or WARNING: Risk of child entrapment.
Child entrapment and suffocation are not problems of the past. Junked or abandoned
?Before you throw away your old appliance: Take off the doors. Leave the shelves in place so that children may not easily climb inside.
?Never allow children to operate, play with, or crawl inside the appliance.
?Never clean the appliance parts with flammable fluids. The fumes can create a fire hazard or explosion.
?Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any other appliance. The fumes can create a fire hazard or explosion.
?Before Using Your Appliance
?Remove the exterior and interior packing.
?Check to be sure you have all of the following parts:
?1 Glass Crisper Cover
?5 Glass Shelves
?5 Door Bins
?2 Egg Trays
?1 Bottle Retainer
?1 Instruction Manual
?Before connecting the unit to the power source, let it stand upright for approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.
?Clean the interior surface with lukewarm water using a soft cloth.
?Installing Your Appliance
?Place your unit on a floor that is strong enough to support the unit when it is fully loaded. To level your unit, adjust the leveling legs at the bottom of the unit.
?Allow space between the back and sides of the unit, which allows the proper air circulation to cool the compressor and condenser.
?Locate the unit away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Extreme cold ambient temperatures may also cause the unit not to perform properly.
?Avoid locating the unit in moist areas.
?Do not under any circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and/or grounding should be directed toward a certified electrician or an authorized Avanti Products service center.
?After plugging the appliance into a wall outlet, allow the unit to cool down for