Avanti Air Conditioner User Manual
MANUAL DE INSTRUCCIONES
Model Numbers/ No. de Modelos:
BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS.
La sección en español empieza en la página 17.
Avanti has a policy of continuous improvement on its products and reserves the right to change materials and specifications without notice.
Avanti Products, A Division of the Mackle Co., Inc.
P.O. Box 520604Miami, Florida 331 52
Thank you for purchasing this fine Avanti product. Please fill out this card and return it within 100 days of purchase and receive these
? Protect your product:
We will keep the model number and date of purchase of your new Avanti product on file to help you refer to this information in the event of an insurance claim such as fire or theft.
?Promote better products:
We value your input. Your responses will help us develop products designed to best meet your future needs.
Avanti Registration Card
City State Zip
Area Code Phone Number
Did You Purchase An Additional Warranty:
Reason For Choosing This Avanti Product:
Please indicate the most important factors that influenced your decision to purchase this product.
?Avanti Reputation?Product Quality
?Salesperson Recommendation?Friend/Relative Recommendation?Warranty?Other_______________________
Model # Serial #
Date Purchased Store/Dealer Name
As Your Primary Residence, Do You:
Is This Product Used In The:
How Did You Learn About This Product:
?In Store Demo
HELP US HELP YOU...
Read this guide carefully.
It is intended to help you operate and maintain your new air conditioner properly.
Keep it handy to answer your questions.
If you don't understand something or you need more assistance, please call:
Avanti Customer Service
Keep proof of original purchase date (such as your sales slip) with this guide to establish the warranty period.
Write down the model and serial numbers.
You'll find them on the rating plate located on the right side of the unit.
Please write these numbers here:
Date of Purchase
Use these numbers in any correspondence or service calls concerning your air conditioner.
If you received a damaged air conditioner, immediately contact the dealer (or builder) that sold you the air conditioner.
Save time and money. Before you call for service, check the Troubleshooting Guide. It lists causes of minor operating problems that you can correct yourself.
IF YOU NEED SERVICE
We're prou d of our service and want you to be pleased. If for some reason you are not happy with the service you receive, here are some steps to follow for assistance.
FIRST, contact the people who serviced your air conditioner. Explain why you are not pleased. In most cases, this will solve the problem.
NEXT, if you are still not pleased, write all the details, including your telephone number, and send it to:
10880 NW 30 Street
Miami, FL 33172 USA
P ARTS AND FEATURES
1.INTERIOR AIR INLET GRILLE
5.INTERIOR AIR OUTLET
6.EXTERIOR AIR INLET
7.POWER SUPPLY CORD
8.FRESHAIR VENT LEVER
10.AUTO SWING SWITCH
TABLE OF CONTENTS
Registration Information ______________________________________________________________2 Help Us Help You__________________________________________________________ ______4
Parts And Features_______________________________________________________________5
Important Safety Instructions __________________________________________________________7 Tips Before Installing Your Air Conditioner______________________________________________7 Tools Needed For Window Installation___________________________________________ ____7
Installation Instructions _______________________________________________________________8 Select The Best Location ______________________________________________________________8 Window Installation Steps _____________________________________________________________9 Installation of Mounting Brackets 9 Installation Of The Cabinet___________________________ _____________________________10 Electrical Connection___________________________________________________________ _11
Operating Your Air Conditioner _______________________________________________________10
Care And Maintenance _______________________________________________________________11 Cleaning The Air Filter _______________________________________________________________13
Troubleshooting Guide ______________________________________________________________ 14
Service For Your Air Conditioner______________________________________________________15
Your Avanti Products Warranty _______________________________________________________16
Wiring Diagram _____________________________________________________________________17
Instrucciones En Español _________________________________________________________
IMPORTANT SAFETY INSTRUCTIONS
?ELECTRIC SHOCK HAZARD?
To reduce the risk of fire, electrical shock,
or injury when using your air conditioner,
follow these basic precautions:
?Read all instructions before using the air conditioner.
?If the air conditioner has a serial plate rating of 115 Volts ~ AC and up to and including 7.5 amps the unit may be on a fuse or circuit breaker with other devices. However, the maximum amps of all devices on that fuse or circuit breaker cannot exceed the amps or the fuse of circuit breaker.
?If the air conditioner has a serial plate rating of 115 Volts ~ AC and greater than 7.5 amps it must have its own fuse or circuit breaker, and no other device or unit should be operated on the fuse or circuit breaker.
?To avoid the possibility of personal injury, disconnect power to the unit before installing or servicing.
Tips Before Installing Your Air Conditioner
?Your room air conditioner unit is designed to be highly efficient and save energy. Follow these recommendations for greater efficiency.
?Select thermostat setting that suits your comfort needs and leave the thermostat at that chosen setting.
?The filter is very efficient in removing airborne particles. Keep air filter clean. The, filter should be cleaned once a month. More frequent cleaning may be necessary depending on outdoor and indo or air quality.
?Use drapes, curtains, or shades to keep direct sunlight from heating your room, but DO NOT obstruct the air conditioner. Allow air to circulate around the unit without obstructions.
?Start your air conditioner before the room temperature air becomes hot and uncomfortable. This avoids an initial period of discomfort while the unit is cooling off the room.
?When room temperature is cool enough, use HIGH or LOW FAN only. This circulates the air, providing some cooling comfort, and utilizes less electricity than when operating on a cooling setting.
?Save the shipping carton and packing materials for future storage or transport of the unit. Please check the contents of hardware kit against the corresponding model check list, prior to installation of the unit.
?Before Starting The Unit:
?Select a suitable location with easy access to an electrical outlet.
?Leave at least 12” of space between your unit and the nearest object, including the wall.
?Install the flexible exhaust hose and the adjustable window slider kit provided (see figure ).
?Plug unit into a 115v/60Hz grounded electrical outlet.
NOTE: Use drapes, curtains or shades to keep direct sunshine from penetrating the room but do not allow them to obstruct the air flow around the unit.
WINDOW KIT INSTALLATION
Installation Accessories (See Fig 1)
Flexible exhaust hose with adapters - 3 pieces
Window exhaust adapter - 1 piece
Adjustable window slider kit – 1 piece
Window KIT Installation:
Kit provided has been designed to fit most standard vertical and horizontal window applications.
Please refer to figures 2A & 2B for minimum and maximum window openings. For certain type of windows you may have to modify the window slider kit.
The exhaust/window kit must be installed at all times when the unit is operating under the cooling mode. There should be at least 11.8”” (30 cm) clearance between the unit and any other objects or building structure. The unit should be installed on a level surface. The window kit does not have to be installed during operation of the remaining two modes. (Dehumidifying/ Fan).
Flexible exhaust hose
Minimum: 21.6” (55 cm)
Maximum: 59” (150 cm)
The unit operates more efficiently if the exhaust hose is shorter.
The exhaust/window kit must be installed at all times when the unit is operating under the cooling mode.
Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is damaged, have it replaced by an authorized Avanti Products service center.
All wiring must comply with local and national electrical codes and must be installed by a qualified electrician.
Check available power supply and resolve any wiring problems BEFORE installing and operating this unit.
This air conditioner should be properly grounded for your safety. The power cord of this air conditioner is equipped with a
Do not under any circumstances cut or remove the third ground prong from the power cord supplied.
This air conditioner requires a standard 115/120 Volt~AC/60Hz electrical outlet with three
Never unplug the air conditioner by pulling the power cord. Always grip the plug firmly and pull straight out from the receptacle.
Do not use plug adapters or an extension cord with this appliance. If the power cord is too short, have a qualified electrician or service technician install an outlet near the appliance.
OPERATING YOUR AIR CONDITIONER
Control Panel Key Pad
Press up and down keys to select a suitable temperature setting. The temperature selected will be displayed in the LCD window. Temperature settings are adjustable between 15ºC (58ºF) to 31 ºC (90ºF).
Press speed key and the speed sequence will be displayed in the LCD window.
(LOW – MED - HIGH)
Each pressing of the mode key will advance to a different mode setting.
(AUTO – COOL – FAN – HUMIDIFY – HEATING) The running mode selected will be displayed in the LCD window.
Press this key to set desired auto
Every time you press the “TIMER” key, the “AUTO OFF” time will be displayed in the LCD window.
The same applies to “AUTO ON” time.
To turn power on, press ON/OFF key once. The unit will run at auto mode. LCD window will display “AUTO”.