Audiovox 1287393A User Manual
A . Welcome
Thank you for choosing the AVD400A DVD Player. The AVD400A is designed to optimize the enjoyment of your favorite DVDs in the mobile environment. This DVD Player is constructed to provide years of reliable,
EXPLANATION OF GRAPHIC SYMBOLS
The lighting flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated ‘dangerous voltage’ within the product’s enclosure that may be of sufficient magnitude to constitute risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK. DO NOT EXPOSE THIS DEVICE TO MOISTURE.
For safety reasons do not allow children to unfasten
It is unlawful in most states for a person to drive a motor vehicle which is equipped with a television viewer or screen that is located in the motor vehicle at any point forward of the back of the driver’s seat, or that is visible, directly or indirectly, to the driver while operating the vehicle. In the interest of safety, this system should never be installed where it will be visible, directly or indirectly, by the operator of the motor vehicle.
1. OBJECTS AND LIQUID
Do not insert objects of any kind into the system through its openings; do not spill or spray liquid on or into the system (this may result in a fire or electric shock). Do not place heavy objects on the unit. To ensure proper ventilation and proper operation, never cover or block the slots and openings.
Do not attempt to disassemble the unit. There is a risk of electric shock and/or exposure to Laser Radiation. Contact qualified service personnel if your system is in need of repair.
3. CLEANING UNIT
When cleaning, make sure the system is unplugged from the power source. Do not use any solvents or cleaning materials. Clean the DVD player using a lightly dampened lint free cloth to wipe the unit.
4. DISCS or (DISC Media)
Do not use irregularly shaped discs such as heart or
5.Powering the DVD Player
This system MUST be powered from switched (Accessory) power as indicated on the marking label. Power should be applied to the unit when the ignition key is in the Run and/or Accessory positions. Use only the supplied power cable provided with this set to avoid electric hazards.
When the temperature rises dramatically from a very low temperature, moisture may condense inside the AVD400A and cause the DVD player to malfunction. If the AVD400A does not operate properly under these conditions leave the AVD400A turned on for at least 30 minutes for the moisture to evaporate.
1.1 Main Unit
2.1 Remote control with one Battery
3.1 12VDC Power Harness
4.2 Brackets with 4 Screws
5.1 Remote IR Receiver
6.1 AV cable (RCA to RCA)
7.1 Owner's Manual (not shown)
Main Unit (Refer to Figure 1)
Remote Control Sensor
Left Audio Input
5 6 7
Right Audio Input
Digital Audio Output
Audio R Output Jack
Audio L Output Jack
Video Output Jack
17.External Remote Eye Input
18.DC In 12V Power Supply Connector
E.Remote Control View (Refer to Figure 2)
4)UP/DOWN/ LEFT/RIGHT Button
6)VOLUME +/- Buttons
20)SCAN FORWARD Button
21)SCAN REVERSE Button
22) MUTE Button
Yellow Video Input (to DVD Player)
Red Audio In
White Audio In
1.Powering your DVD Player ( Refer to Figure 3)
Connect the black wire
2.Remote IR Receiver ( Refer to Figure 3)
Plug the 1/8” plug on the remote IR cable into the IR IN jack on the back of the DVD player. Place the IR receiver anywhere in the vehicle to allow remote control from any location.
3.Connecting to a Monitor ( Refer to Figure 3)
a. Match the
4.Connecting an External Video Source ( Refer to Figure 3)
To connect a video game or another audio/video source, plug the
A/V cable into the A/V input jack on the front of the DVD player.
After connecting power to the unit, press the power button on the main unit momentarily. Insert the disc into the slot on the front of the unit, the unit will load the disc and start playing automatically: If there’s a disc inside the unit, press the POWER button, the unit will start playing automatically.
1. BASIC OPERATION
Turn the unit on/off
Eject/load the disc
Start Play/Execute item or setting
Play at 1/2, 1/4, 1/6 or 1/7 times speed
(1 time) Stop at the present playing point /
(2 times) Stop playing
Go to the next chapter, track or scene during play
Go back to the preceding chapter, track or scene
during play back
Scan forward at 2, 4, 8 or 20 times normal speed
Scan backward at 2, 4, 8 or 20 times normal
Used for Menu Navigation
Execute item or setting
Select item or setting
Display the root menu of the disc
Repeat playing title, chapter, or track
Display information (title, chapter, track, time, etc.).
Change the angles of a scene
Select the subtitle language
Select the audio language
Enlarge an image to 2, 3, or 4 times the
When the unit is in play mode this button will bring
up a display for Brightness + Sharpness adjustment.
For DVD playback Setup press stop and then press
Setup to select and set items, and exit the setup
A DVD is divided into sections called titles and chapters. When you play a DVD, a root menu of the disc will appear on the screen of your TV or Monitor. Contents of the menu will vary depending on the disc content. Press MENU during playback to display the main menu. Some DVDs only allow you to select disc playback options using the DVD root menu.
1) Display mode
During playback press DISPLAY once to display items 5, and 7. Press DISPLAY twice to display the current disc playback information. Press display again to remove the display.
1. The type of disc.
9. The number of total angles.
2. The number of current title.
10. The number of the current audio language.
3. The number of total titles.
11. The number of total audio languages.
4. The number of current chapter. 12. The number of current subtitle language.
5. The elapsed time of title.
13. The number of total subtitle languages.
6. The number of total chapters.
14. Current subtitle language.
7. The remaining time of title.
15. Dolby audio mode.
8. The number of the current
16. Current audio language selected.