Audiovox 128-7284 User Manual
Thank you for choosing the DT102 portable DVD player. The unit applies the latest state of the art electronics and is designed to be used in a variety of applications. It can be used as portable DVD player or when installed into the available docking stations as a home or mobile DVD player. The DVD Player is constructed to provide years of reliable,
It is unlawful in most jurisdictions for a person to drive a motor vehicle which is equipped with a television viewer or screen that is located in the motor vehicle at any point forward of the back of the driver’s seat, or that is visible, directly or indirectly, to the driver while operating the vehicle. In the interest of safety, this system should never be installed where it will be visible, directly or indirectly, by the operator of the motor vehicle.
For safety reasons, when changing video media, it is recommended that the vehicle is not in motion, and that you do not allow children to unfasten
Cautions And Warnings
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing ) instructions in the literature accompanying the appliance.
To prevent fire or electric shock, do not expose this appliance to rain or moisture. Do not place the set on an unstable cart, stand, tripod, bracket or table to prevent it from falling. Keep the DVD Player away from strong magnets, heat sources, direct sunlight, and excessive dust. If the DVD Player is brought directly from a cold to a warm location, moisture may condense inside the DVD Player. When you move it from a cold to a warm location, wait for about one hour before operating the DVD Player, or remove the disc and leave the DVD Player turned ON until the moisture evaporates.
Do not spill or spray liquid of any kind on or in the system (this may result in a fire or electric shock). Do not place anything heavy on the DVD Player. To ensure proper ventilation and proper operation, never cover or block the slots and openings with a cloth or other material.
Keep the DVD Player away from an open flame such as fire, candle etc.
It is hazardous to replace the battery incorrectly. Replace the battery only with the same or equivalent type, in order to protect the environment, please dispose the dispose the battery properly.
To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. There are no
4.Cleaning DVD Player
When cleaning, make sure the system is unplugged from the power source. Do not use liquid cleaners or aerosol cleaners. Use a cloth lightly dampened with water for cleaning the exterior of the system only.
Do not use irregularly shaped discs such as heart or
DVD Player to malfunction. Do not stick paper, tape or glue on the disc. Do not expose the disc to direct sunlight or heat sources. Do not touch the surface of disc. Handle the disc by its edge.
Clean the disc by wiping the disc from the center out with a cleaning cloth. Remove the disc from the DVD Player and store it in its case after playing. Software producers may intentionally fix some playback operations of discs. Since this DVD Player plays discs according to the disc contents the software producers designed, some playback features may not be available. Also refer to the instructions supplied with the discs.
Materials Included In This Package
1)Shuttle Portable DVD Player with 10.2" LCD Monitor (P/N:
2)Headrest Mounting Bag (P/N:
3)Rechargeable Lithium Polymer Battery Pack 5000mAH (P/N:
4)Remote Control (P/N:
5)AC to DC Power Adaptor (P/N:
6)DC Power Adaptor Cable (P/N:
7)AV Adapter Cable (P/N: 112B3227) ~ 1pc
8)Canvas Carrying Bag (P/N:
•10.2” Active Matrix TFT LCD Monitor
•On Screen Display
•Selectable Screen Aspect Ratio 16:9, 4:3 & Screen Off
•AC and DC Power Adapters
•Last Position Memory for Disc Playback
•Game Port Options
•Switchable AUX AV In/Out
•Full Function Remote Control
Front Panel Controls
1 2 3 4 5 6 7 8 9 10 11
1.Power ON/OFF* — Press and hold for one second to switch the DT102 on or off.
2.Screen Mode — To select the screen mode aspect ratio and to turn the screen off (16:9, 4:3 or Off).
3.Pause — To pause Playback.
4.Previous — Go to the previous track / chapter.
6.Menu — Used to access the DT102 setup menu, select from picture adjust, screen mode and volume level.
8.Next — Go to the next track or Chapter.
9.Play — This button is used to enter the play mode.
10.Stop — This button is used to stop playback.
11.Eject* — Press and hold for one second to Eject the Disc.
12.Infrared Transmitter and sensor — Used to transmit audio to the optional wireless Headphones. Also allows the remote control to operate the DT102.
Note: The power and eject function require the button to be pressed for one second to prevent
accidentally accessing these functions.
System Controls and Connections
Left Side Controls and Connections
1.Headphone Jack — Used to connect wired headphones. The sound from the speakers will be automatically cut off when the headphones are connected.
2.AV In/Out Switch
When the AV In/Out switch is set to IN* the unit is ready to accept an auxiliary audio/video signal or game input via the audio video inputs or game port input**.
*Note: The A/V input and game port jack are
Connect an external A/V Source using the supplied A/V adapter cable to the A/V input jacks. The source can be any external A/V device (i.e. Camcorder, digital camera video game etc)
This output will provide an audio/video signal that duplicates the signal displayed on the
DT102. This can be used to connect the DT102 to another monitor or amplifier.
3.Game Port — Connect the optional game controller (GMCT) to this input to play a variety of video games.
4.IR Transmitter On/Off Switch — Used to turn the IR Transmitter on or off. When operating the player with the battery if wireless headphones are not being used set this switch to the Off
position to increase the playback time.
5. 9V DC Input Jack — Used to connect power from either the supplied AC to DC adapter or the
vehicle power adapter.
Right Side Panel Controls and Connections
1.Rear DVD Disc Slot — for loading and removing discs.
1.Power — Turn the DT102 on and off.
2.Display — Display disc information (title, chapter, time, track, etc.)
3.Angle — Displays and selects the available camera angles. Each time you press the button, The angle changes. The number of angles varies from disc to disc.
4.Subtitle — Display the subtitle language of the DVD disc (if the disc was created with subtitles). Each time you press the button, the subtitle language will change.
5.Audio — Press to access the available
Audio languages, when the DVD
disc contains multiple audio languages.
6.PIX (Picture Select) — Each time this button is pressed, the unit will display the “adjustment bars” for Contrast, Brightness,
Color or Tint. Once the desired adjustment bar is displayed, use the Volume Up and Down buttons to adjust the setting. The display will automatically turn off if no
18 17 16
adjustments are made within 6 seconds, or if any other button is pressed.
7.Volume pq — To increase or decrease the volume level.
8.DVD Menu — Allows the user to access the DVD root menu.
9.Cursor (3634) — Use these buttons to Navigate the DVD menu and the set up options.
10.Return — Not used in this model.
12.Rew (7) — Allows the user to search in a backward direction at 2, 4, 8 and 20 times the normal playback speed of a DVD.
13.Fwd (8) — Allows the user to search in a forward direction at 2, 4, 8 and 20 times the normal playback speed of a DVD.
14.Slow — Allows the user to slow the playback speed to 1/2,1/3, 1/4, 1/5, 1/6,
1/7 the normal playback speed of a DVD.
15.Stop (<) — DVD disc playback will be Stopped.
16.Pause (;) — Allows the user to pause Playback and move forward one frame at a time (STEP).
17.Play (4) — Press this button to start Playback while a disc is loaded into the disc compartment.
18.Skip - (9) — Allows the user to return to the previous chapter or track.
19.Skip + (:) — Allows the user to skip to the next chapter or track.
20.Repeat — Allows the user to repeat various Sections of a DVD, CD or MP3.
Initial Use* and Battery Replacement
*When purchased the remote control
has a battery installed with a plastic insert to prevent battery discharge. Remove the plastic insert before attempting to use the remote.
21.Enter — Used to confirm a selected setting or option.
22.Setup — Allows the user to select the DVD player’s setup options (Display, OSD Language, Defaults, Parental Control,
Password, Exit Setup).
23.Zoom — Enlarge or reduce the displayed picture on the DVD disc by pressing the zoom button repeatedly: 2x,3x, 4x, 1/2x,1/3x, 1/4x.
24.Numeric Keypad (0~9) — Allows the user to enter the numbers 0 to 9 for selection of CD tracks, DVD chapters, and
25.Eject (5) — Use this button to eject a disc.
26.Mute — Press this button to mute the audio. Press it again to restore the sound to the previously set level.
1.Remove the battery holder. Refer to the drawing.
2.Insert the battery into the battery holder and insert the battery holder into the remote. Be sure to observe the correct polarity
3.For best results, aim the remote directly at the remote receiver window within 10 feet, and angles not exceeding 60 degrees.
4.The path between the remote control and remote sensor should be free of obstructions.
5.Under normal use the battery will last for approximately one year.
6.Remove the battery if the remote is not going To be used for a long time or during storage.
About the Rechargeable Battery Pack
Battery charge indicator Red – Charging
Green – Fully charged
Battery On/Off Switch
Your portable DVD player comes with a lithium ion rechargable battery that attaches to the bottom of the player. Your new battery must be fully charged before initial use. Charging time is normally about 6 hours. A fully charged battery delivers about 2.5 hours of use, but playback time will vary depending on the playback settings and environmental conditions. If the battery will not be used for a long period of time, fully charge the battery prior to storage.
Working conditions and precautions of the battery
New batteries MUST be fully charged before initial use.
Battery should only be used and charged when temperatures are between
Never put the battery in fire or water.
Do not expose the battery to high temperatures or store in hot, sunny places.
Do not disassemble the battery.
When charging the battery pack, the charge indicator on the battery will light red, when the
charging is complete the light will turn green.
Detach the battery when not in use.
The on/off switch on the battery must be the on position for use and charging. The off position Will prevent accidental battery discharge
Battery Pack Attaching And Placement
Refer to the following steps for attaching the Battery Pack:
Place the DVD Player on a soft and smooth surface to avoid scratching the screen with its back cover facing UP. Position the Battery Pack directly toward the battery slot on the back cover of the DVD Player. Align the pins on the battery pack with the slots on the back of the DT102. Then slide the Battery Pack toward the back of the DVD Player until you hear it click and lock into place.
Charging the Battery Pack
The battery must be attached to the DVD player to charge it and the battery switch must be in the ON position. Plug the AC Power Adapter into the Player’s
DT102. Plug the other end of the Power Cord into a wall Outlet.