User’s manual
TL86009
DECT 6.0 expansion handset for use with AT&T model TL86109
corded/cordless telephone/ answering system with BLUETOOTH® wireless technology
Congratulations
on purchasing your new AT&T product. Before using this AT&T product, please read Important safety information on pages 24-26. For complete instructions, please refer to the manual provided with your TL86109 telephone. For customer service or product information, please visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.
Model #: |
TL86009 |
Type: |
DECT 6.0 expansion handset |
Serial #: |
|
Purchase date: |
|
|
|
Place of purchase: |
|
Both the model and serial numbers of your AT&T product can be found on the bottom of the charger.
Save your sales receipt and original packaging in case it is necessary to return your telephone for warranty service.
Compatible with Hearing Aid T-Coil
T
TIA-1083
Telephones identified with this logo have reduced noise and interference when used with most T-coil equipped hearing aids and cochlear implants. The TIA-1083 Compliant Logo is a trademark of the Telecommunications Industry Association. Used under license.
The ENERGY STAR® program (www.energystar.gov) recognizes and encourages the use of products that save energy and help protect our environment. We are proud to mark this product with the ENERGY STAR® label indicating it meets the latest energy efficiency guidelines.
The Bluetooth® word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by Advanced American Telephones and its parent, VTech Holdings Limited, is under license. VTech Holdings Limited is a member of Bluetooth SIG, Inc. Other trademarks and trade names are those of their respective owners.
© 2010 Advanced American Telephones. All Rights Reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed to Advanced American Telephones, San Antonio, TX 78219. Printed in China.
Parts checklist
Your telephone package contains the following items.
User’s manual
TL86009
DECT 6.0 expansion handset for use with AT&T model TL86109
corded/cordless telephone/ answering system with BLUETOOTH® wireless technology
User’s manual |
Cordless handset |
Charger for cordless |
||
|
|
|
|
handset with power |
|
|
|
|
adapter installed |
|
|
|
|
|
Battery for |
Battery compartment cover |
Belt clip for |
cordless handset |
|
cordless handset |
User’s manual
TL86009
DECT 6.0 expansion handset for use with AT&T model TL86109
corded/cordless telephone/ answering system with BLUETOOTH® wireless technology
Table of contents |
|
Getting started |
|
Installation....................................... |
1 |
Quick reference guide................ |
2 |
Charger installation..................... |
5 |
Battery installation and |
|
charging............................................. |
6 |
Battery charging............................ |
8 |
Belt clip & optional headset... |
9 |
Adding handset to your |
|
telephone base |
|
Adding and registering |
|
handsets.......................................... |
10 |
Expand your telephone |
|
system.............................................. |
11 |
Add and register a |
|
handset...................................... |
11 |
Replace a handset...................... |
12 |
Appendix |
|
Troubleshooting........................... |
13 |
Maintenance.................................. |
23 |
Important safety |
|
information.................................... |
24 |
Safety information................ |
24 |
Especially about corded |
|
telephones................................ |
25 |
Precautions for users |
|
of implanted cardiac |
|
pacemakers.............................. |
26 |
Pacemaker patients............. |
26 |
Especially about telephone |
|
answering systems............... |
26 |
FCC Part 68 and ACTA............. |
27 |
FCC Part 15................................... |
29 |
Limited warranty......................... |
30 |
Technical specifications........... |
33 |
DECT 6.0 digital |
|
technology................................ |
33 |
Telephone operating |
|
range........................................... |
34 |
Extended range and |
|
clarity.......................................... |
34 |
Getting started
Installation
You must install and charge the handset battery before using the cordless handset.
See pages 6-8 for easy instructions.
Your product may be shipped with a protective sticker covering the handset display - remove it before use.
For customer service or product information, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.
Avoid placing the telephone base too close to:
•Communication devices such as television sets, VCRs, or other cordless telephones.
•Excessive heat sources.
•Noise sources such as a window with traffic outside, motors, microwave ovens, refrigerators, or fluorescent lighting.
•Excessive dust sources such as a workshop or garage.
•Excessive moisture.
•Extremely low temperature.
•Mechanical vibration or shock such as on top of the washing machine or work bench.
Getting started
Quick reference guide
Softkeys (2)
Press to select a menu item displayed above the key.
CHARGE light (blue ring around
DIR//VOL//CID)
On when the handset is charging in the charger.
DIR/ /VOL
Press to scroll up while in menus.
Press to increase the volume level during a call.
Press to show directory entries when the telephone is not in use.
While entering names or numbers, press to move the cursor to the right.
CELL
Press to make or answer a cell call.
Flashes quickly when there is an incoming cell call.
Flashes slowly when a cell call is on hold.
OFF/CLEAR
While using menus, press to cancel an operation, back up to the previous menu, or exit the menu display. Press and hold to return to idle mode.
While entering names or numbers, press to delete a digit or a character.
During a call, press to hang up.
VOL/ /CID
Press to scroll down while in menus.
Press to decrease the volume level during a call.
Press to show the
caller ID history when the telephone is not in use.
While entering names or numbers, press to move the cursor to the left.
Getting started
Quick reference guide
1
While reviewing a caller ID history entry, press repeatedly to add or remove 1 in front of the telephone number before dialing or saving it in the directory.
TONE
Press to switch to tone dialing temporarily during a call if you have pulse service.
/SPEAKER
Press to turn on the handset speakerphone. Press again to resume normal handset use.
HOLD
Press to put a call on hold.
1LINE/FLASH/
2LINE/FLASH
Press 1 LINE/FLASH to make or answer a call on line 1. During a call, press to answer an incoming call on line 1 when you receive a call waiting alert.
Press 2 LINE/FLASH to make or answer a call on line 2. During a call, press to answer an incoming call on line 2 when you receive a call waiting alert.
#
Press repeatedly to display other dialing options when reviewing a caller ID history entry.
REDIAL/PAUSE
Press to view the redial list.
While entering numbers, press and hold to insert a dialing pause.
Getting started
Quick reference guide
EQ
During an outside call, intercom call, message or announcement playback, press to change the quality of the audio to best suit your hearing.
HANDSET |
L1) |
L2) |
CL) |
MENU |
PLAY MESSAGES |
|
BACK |
SELECT |
Press the MENU softkey to enter the main menu which includes the following:
PLAY MESSAGES
ANSWERING SYS DIRECTORY CALL LOG INTERCOM RINGER SETTINGS WEBSITE
Getting started
Charger installation
Install the charger as shown below.
Plug the power adapter into an electrical outlet not controlled by a wall switch.
IMPORTANT INFORMATION:
1.Use only the power adapter provided with this product. To obtain a replacement, visit our website at www.telephones.att.com or
call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.
2.The power adapter is intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet.
Getting started
Battery installation and charging
Install the battery as shown below.
Step 1
Plug the battery connector securely into the socket inside the handset battery compartment, matching the color-coded label. Insert the supplied battery with the label
THIS SIDE UP facing up as indicated.
Step 2
Align the cover flat against the battery compartment, then slide it upwards until it clicks into place.
Step 3
Charge the handset by placing it face up in the charger. The
CHARGE light is on when charging.
CHARGE light |
Getting started
Battery installation and charging
After you install your telephone or power returns following a power outage, the handset will prompt you to set the date and time. To skip setting the date and time, press OFF/CLEAR.
SET DATE --/--/-- MM/DD/YY
SET
SET TIME --:-- --
SET
To replace the battery, press the tab and slide the battery compartment cover downwards. Lift out the old battery and disconnect it from the handset. Follow the instructions on page 6 to install and charge the new battery.
IMPORTANT INFORMATION:
1.Use only the supplied rechargeable battery or replacement battery (model BT184342/BT284342). To order, visit our website at
www.telephones.att.com or call 1 (800) 222-3111.
In Canada, dial 1 (866) 288-4268.
2.If you do not use the handset for a long time, disconnect and remove the battery to prevent possible leakage.
Getting started
Battery charging
Once you have installed the battery, the screen indicates the battery status (see table below). If necessary, place the handset in the charger to charge the battery. For best performance, keep the handset in the charger when not in use. The battery is fully charged after 16 hours of continuous charging. See the table on page 33 for battery operating times.
If the screen shows Low battery, you need to charge the battery without interruption for at least 25 minutes to give the handset enough charge to use the telephone for a short time. The following table summarizes the battery charge indicators and actions to take.
Battery indicators |
Battery status |
Action |
||
|
|
|
|
|
The screen is blank or |
The battery has very little |
Charge without |
||
shows Place in charger. |
or no charge. The handset |
interruption until the |
||
|
|
|
cannot be used. |
screen shows |
|
|
|
|
Low battery or |
|
|
|
|
HANDSET X (at least |
|
|
|
|
five minutes). |
|
|
|
|
|
The screen shows |
Battery has enough |
Charge without |
||
Low battery and |
|
|
charge to be used for a |
interruption until |
|
||||
flashes. |
short time. |
the screen shows |
||
|
|
|
|
HANDSET X (at least |
|
|
|
|
25 minutes). |
|
|
|
|
|
The screen shows |
Battery is charged. |
To keep the battery |
||
HANDSET X. |
|
charged, place it in |
||
|
|
|
|
the charger when not |
|
|
|
|
in use. |
|
|
|
|
|
NOTE: If you are on a phone call in low battery mode, you hear four short beeps every minute.