AT&T 5800 User Manual

Size:
423.04 Kb
Download

5800_CIB_1ATT 8/6/02 10:43 AM Page II

USER’S MANUAL

Part 2

Expansion Handset 5800

Please also read

Part 1 — Important

Product Information

© 2002 Advanced American Telephones. All Rights Reserved.

AT&T and the Globe Symbol are trademarks of AT&T Corp., licensed to Advanced American Telephones.

5800_CIB_1ATT 8/6/02 10:43 AM Page III

Visit us at www.telephones.att.com

© 2002 Advanced American Telephones. All Rights Reserved.

AT&T and the Globe Design are trademarks of AT&T Corp., licensed to

Advanced American Telephones.

Printed in China. Issue 1AT&T 08/02

5800_CIB_1ATT 8/6/02 10:43 AM Page V

CONTENTS

 

BEFORE YOU BEGIN ......................................................................

1

About Handset Registration ....................................................................................

1

About Softkeys.........................................................................................................

1

CHARGE THE BATTERY...................................................................

2

REGISTER THE HANDSET................................................................

3

To Model 5830 Base Unit .......................................................................................

3

To Model 5840 Base Unit .......................................................................................

3

INSTALLATION .............................................................................

4

Belt Clip ...................................................................................................................

4

Headset ....................................................................................................................

4

Battery Life...............................................................................................................

5

Charge the Handset Battery Pack...........................................................................

5

CONTENTS

5800_CIB_1ATT 8/6/02 10:43 AM Page 1

BEFORE YOU BEGIN

About Handset Registration

You must register this (and any other) handset with the base, following the directions in “REGISTER THE HANDSET.” This handset is compatible with telephone models 5840 and 5830.

The original handset that came with the base is automatically registered as Handset 1.

Additional handsets will be assigned Handset 2, Handset 3, Handset 4, Handset 5, and Handset 6.

Whenever you install a handset battery pack, the handset will display SEARCHING FOR BASE (if it’s registered) orENTER BASE ID (if it’s not registered).

About Softkeys

The handset softkeys are located below the screen display.

Press the softkey below the operation displayed on

the screen to select that operation. (For example, to enter the menu, press the center softkey).

Press O/Cat any time to return to the previous screen.

k

ip

• Press and hold O/Cto return to the idle

 

o screen.

BEGIN

BEFORE YOU

1

5800_CIB_1ATT 8/6/02 10:43 AM Page 2

CHARGE THE BATTERY

CHARGE THE BATTERY

1Install the handset battery pack.

Use only the battery supplied with this handset or AT&T Accessory Battery Model 2401, SKU#91077.

When you install the battery pack the first time, the handset will display ENTER BASE ID.

2

a) Remove battery

b) Align the contacts and

compartment cover by

place the battery pack in

pressing on indentation

the battery compartment.

and sliding downward.

 

c) Replace cover by sliding it on its track up over battery case until it snaps firmly into place.

Charge the handset battery.

Place the handset in the remote charging stand. The CHARGING light goes on.

Charge the battery at least 12 hours. After the first charge, the battery typically charges in only eight hours.

2

5800_CIB_1ATT 8/6/02 10:43 AM Page 3

REGISTER THE HANDSET

To Model 5830 Base Unit

1Make sure to charge the handset battery pack at least 12 hours.

2At the cordless handset, use the softkey to select NEW.

3Enter the 15-digitBase Unit ID Code located on the underside of your Model 5830 base.

4Use the softkey to select OK. The screen displaysPLEASE WAIT!!.

5 After

seconds, the screen displays FOUND BASE. If the

 

BASE BUSY TRY LATER, the base is in use.

To

 

Base Unit

 

1

Make

the handset battery pack at least 12 hours.

2

At

 

MENU .

3

Use

 

BASE-ID.

 

OK

 

Base ID

 

code

30

to the idle screen. Write

 

 

ID code

enter it at the handset in

 

STEP

.

 

5

At

handset,

to select NEW.

6

Enter

Base

 

7

 

OK

 

8

After

seconds,

displays FOUND BASE. If the

 

 

BASE

LATER, the base is in use.

REGISTER THE HANDSET

 

operational instructions,

refer

that came

with your

5830 telephone.

3

5800_CIB_1ATT 8/6/02 10:43 AM Page 4

INSTALLATION

INSTALLATION

Belt Clip

Attach the belt clip (optional).

a) Slide

b) Press tabs

down

on belt clip

into

into slots

grooves

on back of

to attach.

handset to

 

reattach.

c)To remove, lift one

side

with your thumbnail and push back.

Headset

You can use this telephone hands-freewhen you install any industry standard

2.5 mm headset (purchased separately). For best results use an AT&T 2.5 mm headset.

Plug the headset into the jack located on the left side of the handset (under the small rubber flap). Do not force the connection, but make sure the plug fits securely.

4

5800_CIB_1ATT 8/6/02 10:43 AM Page 5

Battery Life

A fully charged battery provides an average talk time of about eight hours, or standby time of five days.

¥NOTE: Talk time and standby time may vary depending on operating conditions.

Charge the Handset Battery Pack

After a low battery indicator, the handset battery needs to be charged.

Place the handset in the base so

the CHARGING light goes on. The battery pack is typically charged in nine hours.

• If you repeatedly get a low battery indicator, even after nine hours of charging, the battery should be replaced. Use only AT&T Battery 2401,

SKU# 91077.

CAUTION: Charge the battery provided with or identified for use with this product only in accordance with the

instructions and limitations specified in the User’s Manual, Part 1.

INSTALLATION

5

Need Help Insert 8/6/02 8:25 AM Page 1

Congratulations on your purchase of this AT&T product.

NEED HELP?

Our representatives are here to help you with any questions concerning the operation of this product, available accessories, or any other related issues.

Call Toll Free 1 (800) 360-4121

or visit our website at www.telephones.att.com