AT&T 2231 User Manual

Size:
3.02 Mb
Download

AT&T

EDIT NUMBER 555-6789_

EDIT NAME

Andy_

Andy

555-6789

Phonebook

To dial, change or delete entries

To dial a number

Pat Williams

555-1234

11/23 12:34PM

entry

phonebook entry is displayed, press DELETE to delete the displayed entry from the phonebook. Once deleted, an entry cannot be recovered.

To change a listing

When any phonebook entry is displayed, press SEL to modify the entry. (See page 16 for help in modifying the name or number.)

Change the number as needed, then press SEL. Change the name as needed, then pressSEL to save the modified entry.

Caller ID Logs

How Caller ID works

If you subscribe to Caller ID service provided by your local phone company, information about each caller will be displayed after the first ring.

Caller’s name

 

 

Caller’s number

 

 

 

 

Pat Williams

 

 

555-1234

 

New or

NEW 11/23 12:34PM

 

 

 

Time of call

 

 

old call

 

 

 

 

 

 

Date of call

Information about the last 50 incoming calls is stored in your call log. You can review the call log to find out who has called, return the call without dialing, or copy the caller’s name and number into your phonebook.

When the call log is full, the oldest entry is deleted to make room for new incoming call information.

If you answer a call before the information appears on the screen, it will not be saved in your call log.

About names

Names of callers will be displayed only if this information is provided by your local telephone company.

If the telephone number of the person calling matches a number in your phonebook, the name that appears on screen will match the name as you entered it into your phonebook.

(Example: If “Christine Smith” calls, her name will appear as “Chris” if this is how you entered it into your phonebook.)

18

19

AT&T

6 NEW CALLS

NEW

Pat Williams

555-1234

NEW 11/23 12:34PM

Chris Thompson

908-555-0100

NEW 11/22 10:12PM

Jeffrey Adams

555-8976

NEW 11/22 10:01PM

Caller ID Logs

log

To review your call log

Press CID to review your call log. The most recent call is displayed first. Use the arrow buttons to scroll through the list as shown at left.

To return a call

Example:

CID

Number displayed as 1-908-555-0100

#

Number changes to 555-1234(drops“1” + area code)

PHONE

Dials 555-1234

(or SPK)

 

Other options

Press DELETE to delete this entry from your call log.

Press and hold DELETE to delete all entries from your call log. When asked to confirm, pressSEL to clear your call log of all entries, orOFF to exit and leave all call log entries intact.

Press SEL to copy this entry into your phonebook. If the name or number are not provided, you will be prompted to enter them.

Appendix

Screen icons, indicator lights & tones

Handset screen icons & alert tones

Screen icons

Speakerphone in use

Ringer off

AT&T

Battery charging (animated display)

MUTENEW 11/23 10:01AM

Low battery (flashing); place handset in base or charger to recharge

MUTE Microphone is muted

NEW New calls (pressCID to review call log)

Alert tones

Happy

Programming command completed successfully

tone

2 beeps Programming error (or last record in list displayed)

Indicator lights

MESSAGE WAITING

Flashes when you have new voice mail (requires voice mail service from your local telephone company)

IN USE

On when handset is in use. Flashes when another phone is in use on the same line.

CHARGING

On when handset battery is charging

SPK

On when speakerphone is in use

20

21

Appendix

In case of difficulty

If you have difficulty with your phone, please try the suggestions below. For Customer Service, visit our web site at www.telephones.att.com, or call1-800-222–3111.

Telephone does not work at all

Make sure batteries are installed and charged correctly (see page 7).

Make sure the AC adapter is plugged into an outlet not controlled by a wall switch.

Make sure the telephone line cord is plugged firmly into the base unit and the modular jack.

If you have dial-pulsetelephone service, make sure the dial mode is set to Pulse (see page 14).

If these suggestions do not work, unplug the base, remove and reinsert the batteries, then place the handset in the base to re-initialize.

Phone does not ring

Make sure the ringer is on (see page 13).

Make sure the telephone line cord and AC adapter are plugged in properly (see page 6).

Move the handset closer to the base.

You might have too many extension phones on your telephone line to allow all of them to ring. Try unplugging some of them.

If you hear noise or interference during a call

You may be out of range. Move closer to the base.

Appliances plugged into the same circuit as the base can cause interference. Try moving the appliance or base to another outlet.

The layout of your home or office might be limiting the operating range. Try moving the base to another location, preferably on an upper floor.

If the buttons don’t work, try placing the handset in the base for at least 15 seconds.

Disconnect the base from the modular jack and plug in a corded telephone. If calls are still not clear, the problem is probably in your wiring or local service. Call your local telephone service company.

Appendix

Technical specifications

RF Frequency Band

2400 MHz — 2483 MHz

(Handset to Base)

 

 

 

RF Frequency Band

2400 MHz — 2483 MHz

(Base to Handset)

 

 

 

Channels

95

 

 

Channel Spacing

864 KHz

 

 

Output Power

20 dBm

 

 

Sensitivity

-96dBm

 

 

Modulation

GFSK

 

 

Operating Temperature

32°F — 122°F

 

0°C — 50°C

 

 

Base Unit Voltage

96 — 130 Vrms

(AC Voltage, 60Hz)

 

 

 

Base Unit Voltage

7 — 13 Vdc @400 mA

(AC Adapter Output)

 

 

 

Handset Voltage

3.2 — 4.7 Vdc @600 mAh

 

 

22

23

Appendix

Index

A

AC adapter, 6, 8

Alert tones, 21

Answering calls, 10

B

Battery charging, 7

Battery installation, 7

Belt clip, 9

C

Call logs, 19 Caller ID, 19

add entries to phone directory, 20 delete entries, 20

dial entries, 20 CID, 21 Conference calls, 11

D

Delete Call Log entries, 20 Delete redial entries, 10 Dialing,

manual dialing, 10 phonebook dialing, 18

M

Making calls, 10

Menus, 2, 13-14

Mute, 10

N

Names,

enter into phonebook, 16 search for, 17

O

Operating range, 5

P

Paging, 12

Phonebook,

dial number, 18 edit entries, 18 name search, 17 new entries, 16

Problems, 22

Q

Quick reference guide, 2-3

R

E

Elapsed time, 10

Ending calls, 10

F

Flash (switchhook flash), 11

H

Hands-freeuse, 10

Headphone, 9

I

Incoming call log, 19 Incoming calls, answering, 10 Indicator lights, 21 Intercom, 12

L

Last number redial, 10 Low battery, 7

Receiving calls, 10 Recharging, 7 Redial, 10

Ring silencing, 11 Ring tone options, 13

S

Search for name, 17

Speakerphone, 10

T

Technical specifications, 23 Troubleshooting, 22

V

Volume controls, 11

24

www.telephones.att.com

Copyright ; 2004 Advanced American Telephones. All Rights Reserved. AT&T and the Globe Design are trademarks of AT&T Corp.,

licensed to Advanced American Telephones. Printed in China. Issue 2 AT&T 04/04. 91-5599-20-00