AT&T 1477 User Manual

Size:
5.54 Mb
Download

91-5677-20-00.ATT1477.RO.qxd1950/2/13 ⁄U⁄¨ 07:21 Page 1

User Manual (Part 2)

2.4 GHz Cordless Speakerphone/ Answering System 1477/1177

with Caller ID & CallWaiting

91-5677-20-00.ATT1477.RO.qxd1950/2/13 ⁄U⁄¨ 07:21 Page 2

You must install and

See page 7

charge the battery before

using the telephone

STOP! for easy instructions

For customer service or product information, visit our web site at www.telephones.att.com or call1-800-222-3111

Please also read

Important Product Information

Enclosed in product package

CAUTION: To reduce the risk of fire or injury to persons or damage to the telephone, read and follow these instructions carefully:

Use only Replacement Battery 2422 (SKU# 23402).

Do not dispose of the battery in a fire. Like other batteries of this type, it could explode if burned. Check with local codes for special disposal instructions.

Do not open or mutilate the battery. Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed.

Exercise care in handling batteries in order not to short the battery with conducting materials such as rings, bracelets, and keys. The battery or conductor may overheat and cause harm.

Charge the battery provided with or identified for use with this product only in accordance with the instructions and limitations specified in this manual.

Observe proper polarity orientation between the battery and battery charger.

Do not disassemble your telephone. There are nouser-serviceableparts inside. Refer for servicing to qualified service personnel.

91-5677-20-00.ATT1477.RO.qxd1950/2/13 ⁄U⁄¨ 07:21 Page 1

User Manual (Part 2)

2.4 GHz Cordless Speakerphone/ Answering System 1477/1177

with Caller ID & CallWaiting

Table of contents

Getting Started

 

Quick reference guide ........................

2

Parts checklist .......................................

4

Before you begin ..................................

5

Telephone base installation................

6

Battery installation & charging ..........

7

Wall mounting ......................................

8

Belt clip & optional headset..................

9

Telephone Operation

 

Customizing your telephone...........

10

Making and answering calls..............

12

Options while on calls ......................

14

Handset locator & intercom ...........

16

Directory Dialing

 

Directory dialing ................................

17

Speed dialing........................................

18

Entering names into directory ........

20

Directory name search.....................

21

To move, edit or delete a listing ....

22

Caller ID Operation

 

Caller ID operation ...........................

23

To review your call log.....................

24

To dial a call log entry ......................

25

To delete call log entries .................

26

To add entries to phone directory..

27

Answering System Operation

Answering system operation ..........

28

Day and time announcements ........

29

Outgoing announcements................

30

Announce Only mode ......................

31

Changing feature options.................

32

Message playback ...............................

33

Recording and playing memos ........

34

Message window displays.................

35

Remote access....................................

36

Appendix

 

Screen messages, lights and tones....

37

In case of difficulty .............................

39

Index .....................................................

41

Technical specifications ....................

43

1

91-5677-20-00.ATT1477.RO.qxd1950/2/13 ⁄U⁄¨ 07:21 Page 2

Getting Started

Quick reference guide

Handset

Incoming calls (see page 23)

NEW 00

OLD 27

0

8/12 10:06 AM

Low battery

Date and time

HOLD

SELECT

Press to place a call on hold. Press again to resume your call.

Press to store a programming option (see page 10), or to store a directory entry in memory (see page 20).

PHONE/FLASH

Press to begin a call, then dial a number.

During a call, press to receive an incoming call, if Call Waiting is activated (see page 14).

OFF

During a call, press to hang up.

During programming, press to exit without making changes.

INTER/CID DEL

PROG/CHAN

Press to initiate an intercom call

Press to customize the telephone’s

between the handset and the base

operation (see page 10).

(see page 16).

 

 

If call is noisy or unclear, press to

Press to delete call log entries (see

switch to a clearer channel.

page 26).

 

Using the dial pad to enter letters (see page 20)

 

 

 

 

 

Press once to enter “A”

 

 

 

 

 

 

 

 

 

 

Press twice to enter “B”

 

 

 

 

 

 

 

 

 

 

Press 3 times to enter “C”

 

 

 

 

 

2

 

 

Press 4 times to enter “2”

V^VOLUME/FUNCTION

During a call, press V^to adjust listening volume.

While programming, press to change menu item or value (see page 10).

Press ^DIR when phone is not in use to display Phonebook entries (see page 20). While entering letters, press to advance cursor.

Press VCID when phone is not in use to display Caller ID information (see page 24). While entering numbers or letters, press to delete last character entered.

REDIAL/PAUSE

Press to display last number called (see page 12).

Press twice to delete the number.

While dialing or entering numbers into your phone directory, press to insert a 4-seconddialing pause (see page 20).

2

91-5677-20-00.ATT1477.RO.qxd1950/2/13 ⁄U⁄¨ 07:21 Page 3

Getting Started

Quick reference guide

Base

Swivel antenna fully

 

 

upright for best results.

Answering

Telephone

system

function keys

controls

 

Telephone function keys (see pages 10-22)

FLASH ....................

During a call, press to receive an incoming call, if

PROG

Call Waiting is activated.

Press to enter Speed Dialing program.

MEM........................

Press, then enter location number (0-9)to call a number

REDIAL/PAUSE

stored in Speed Dialing memory.

Press to redial last number called.

INTERCOM/PAGE..

Press to initiate an intercom call between the base and

MUTE

handset. Press and hold to locate handset if lost.

Press to silence microphone; press again to resume.

HOLD ......................

Press to place a call on hold; press @SPEAKERPHONE

SPEAKERPHONE

or HOLD to resume.

Press to turn speakerphone on or off (begin or end a call).

Answering system controls (see pages 28-36)

MENU......................

Press to review or change answering system options.

CHANGE ................

Press to change a menu option.

REC/MEMO ............

Press to record a memo or outgoing announcement.

TIME/SET................

Press to view or set date and time.

ON/OFF ..................

Press to turn answering system on or off.

DELETE ..................

Press to delete message currently playing.

REPEAT/SLOW......

Press to repeat message; hold to slow playback.

SKIP/QUICK ..........

Press to skip message; hold to speed up playback.

PLAY/STOP............

Press to retrieve messages or stop playback.

NOTE: Handset will not ring while in the base, unless the base ringer is turned off (see page 11).

3

91-5677-20-00.ATT1477.RO.qxd1950/2/13 ⁄U⁄¨ 07:21 Page 4

Getting Started

Parts checklist

Remember to save your sales receipt and original packaging in case you ever need to ship your telephone for warranty service. Check to make sure the telephone package includes the following:

Telephone base

Telephone handset

Power

adapter Battery pack

Belt clip

Long line cord

Short line cord

4

91-5677-20-00.ATT1477.RO.qxd1950/2/13 ⁄U⁄¨ 07:21 Page 5

Getting Started

Before you begin

About Caller Identification

Caller ID with Call Waiting features in this telephone let you see who’s calling before you answer the phone, even when you’re on another call. These features require services provided by your local telephone company.

Contact your telephone service provider if:

You have both Caller ID and Call Waiting, but as separate services (you may need combined service)

You have only Caller ID service, or only Call Waiting service

You don’t subscribe to any Caller ID or Call Waiting services.

You can use this phone with regular Caller ID service, and you can use its other features without subscribing to either Caller ID or combined Caller ID with Call Waiting service. There may be fees for these services, and they may not be available in all areas.

Caller ID features will work only if both you and the caller are in areas offering Caller ID service, and if both telephone companies use compatible equipment.

See Caller ID Operation, beginning on page 23, for more details about how these features work.

Telephone operating range

This cordless telephone operates with the maximum power allowed by the Federal Communications Commission (FCC). Even so, this handset and base can communicate over only a certain distance — which can vary with the locations of the base and handset, the weather, and the construction of your home or office. For best performance, keep the base antenna fully upright.

If you receive a call while you are out of range, the handset might not ring — or if it does ring, the call might not connect when you press PHONE. Move closer to the base, then press PHONE to answer the call.

If you move out of range during a phone conversation, you might hear noise or interference. To improve reception, move closer to the base.

If you move out of range without pressing O, your phone will be left “off the hook.” To hang up properly, walk back toward the telephone base, periodically pressing Ountil the call is disconnected.

5

91-5677-20-00.ATT1477.RO.qxd1950/2/13 ⁄U⁄¨ 07:21 Page 6

Getting Started

Telephone base installation

Install the speakerphone base as shown below. Choose a location away from electronic equipment, such as personal computers, television sets or microwave ovens. Avoid excessive heat, cold, dust or moisture.

NOTE: Use only the power cord supplied with this product.

If you need a replacement, call 1-800-222-3111.

Be sure to use an electrical outlet not controlled by a wall switch.

Plug long line cord

Plug power cord

into telephone jack.

transformer into

 

electrical outlet.

6

91-5677-20-00.ATT1477.RO.qxd1950/2/13 ⁄U⁄¨ 07:21 Page 7

Getting Started

Battery installation & charging

After installation, place the handset in the base and allow the battery to charge for 12 hours before use. You can keep the battery charged by returning the handset to the base after each use. When battery power is fully depleted, a full recharge takes about 8 hours.

Press coin into slot on base of handset to release latch, then remove cover.

Insert top tabs first.

BATTERY LOW

8/12 10:06AM

Low battery indicator

Return handset to base to recharge when this symbol appears. (Handset will beep when battery is low.)

Plug in battery here.

Place handset in base to charge for 12 hours before first use.

Charging light will be illuminated while battery is charging.

Rotate antenna to fully upright position.

Press down to click in place.

7

91-5677-20-00.ATT1477.RO.qxd1950/2/13 ⁄U⁄¨ 07:21 Page 8

Getting Started

Wall mounting

The speakerphone base can be installed on any standard wall-phoneoutlet as shown below. Choose a location away from electronic equipment, such as personal computers, television sets or microwave ovens. Avoid excessive heat, cold, dust or moisture.

Connect line cord and AC adapter as shown on page 6, then grasp and squeeze to open hinged wall mount.

Plug power cord transformer into electrical outlet.

Swivel wall mount down and lock in place.

Plug short line cord into telephone jack.

Press and slide down firmly so base is held securely on outlet mounting pegs.

8