Atlantis Land A02-RA142-W54 User Manual

Size:
5.68 Mb
Download

WebShare 142W

Wireless ADSL2+ Router

A02-RA142-W54

USER’S MANUAL

A02-RA142-W54_ME01

Where solutions begin

Company certified ISO 9001:2000

Where solutions begin

Company certified ISO 9001:2000

WebShare 142W

INDICE

CHAPTER 1: INTRODUCTION

1

 

1.1

An Overview of WebShare Wireless ADSL2+ Router

 

1

 

1.2

Package Contents

 

 

 

2

 

1.3

WebShare Wireless Router ADSL2+ Features

 

 

2

 

1.4

WebShare Wireless Router ADSL2+ Application

 

4

CHAPTER 2: USING WEBSHARE WIRELESS ADSL2+ ROUTER

6

2.1

Cautions for using the WebShare Wireless ADSL2+ Router

6

2.2

The Front LEDs

 

6

2.3

The Rear Ports

 

7

2.4

Cabling

8

CHAPTER 3: CONFIGURATION

9

 

3.1

Before Configuration

 

 

 

 

 

 

9

 

3.1.1 Configuring PC for Windows 95/98/ME

10

 

3.1.2 Configuring PC for Windows NT4.0

12

 

3.1.3 Configuring PC for Windows 2000

13

 

3.1.4 Configuring PC for Windows XP

15

 

3.1.5 Configuring for MAC

17

 

3.1.6 Verification of Configuration

18

 

3.1.7 Browser Configuration

18

 

3.2

Factory Default Setting

 

 

 

 

19

 

3.2.1 Password

 

 

 

 

19

 

3.2.2 LAN and WAN Port Addresses

20

 

3.3

Reset of WebShare Wireless Router ADSL2+

20

 

3.4

Informations from the ISP

 

 

 

20

 

3.5

Browser Configuration

 

 

 

21

 

3.6

Surfing in Web GUI Configuration

 

21

 

3.7 Configuring Password

 

 

 

22

 

3.8

Resetting the ADSL Router

 

23

 

3.8.1 Using The Reset Button

23

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

WebShare 142W

 

CHAPTER 4: QUICK START

24

 

4.1

Wizard Setup Introduction

 

 

 

24

 

4.2

Encapsulation

 

 

 

 

 

 

 

 

 

 

 

 

24

 

4.2.1 PPP over Ethernet

24

 

4.2.2 PPPoA

24

 

4.2.3 RFC 1483

24

 

4.3

Multiplexing

 

 

 

 

 

 

 

 

 

 

 

 

25

 

4.3.1 VC-based

Multiplexing

25

 

4.3.2 LLC-basedMultiplexing

25

 

4.4 VPI and VCI

 

 

 

 

 

 

 

 

 

 

 

 

25

 

4.5

Quick Start

 

 

 

 

 

 

 

 

 

 

 

 

 

25

 

4.6

Wizard Setup Configuration: Connection Tests

 

28

CHAPTER 5: LAN SETUP

29

 

5.1 LAN Overview

 

 

 

 

 

 

 

29

 

5.1.1 LANs, WANs and the ADSL Router

29

 

5.2 DNS Server Address

 

 

 

29

 

5.3 DNS Server Address Assignment

 

30

 

5.4 LAN TCP/IP

 

 

 

 

 

 

 

 

30

 

5.4.1 Factory LAN Defaults

30

 

5.4.2 IP Address and Subnet Mask

31

 

5.4.3 RIP Setup

31

 

5.4.4 Multicast

31

 

5.5 Configuring LAN

 

 

 

 

33

 

5.6 Wireless

 

 

 

 

 

 

 

35

CHAPTER 6: WAN SETUP

40

 

6.1 WAN Overview

 

 

 

 

40

 

6.2

PPPoE Encapsulation

 

 

40

 

6.3

PPTP Encapsulation

 

 

 

40

 

6.4

Traffic Shaping

 

 

 

40

 

6.5

Configuring WAN Setup

 

42

CHAPTER 7: NETWORK ADDRESS TRANSLATION (NAT)

47

 

7.1 NAT Overview

 

47

 

7.1.1 NAT Definitions

47

 

7.1.2 What NAT Does

47

 

7.1.3 How NAT Works

48

 

7.1.4 NAT Application

48

 

 

 

 

 

WebShare 142W

 

7.1.5 NAT Mapping Types

49

7.2

SUA (Single User Account) Versus NAT

 

50

7.3

Virtual Server and DMZ

 

 

50

7.3.1 Port Forwarding: Services and Port Numbers

50

7.3.2 Virtual Server

52

Click on Advanced Setup then NAT.

52

7.4

Selecting the NAT Mode

 

54

CHAPTER 8: ACCESS MANAGEMENT

57

 

8.1 ACL

 

 

 

 

 

57

 

8.2 IP Filter

 

58

 

8.3 SNMP

 

60

 

8.4 UPnP

 

 

60

 

8.5 DDNS

 

61

CHAPTER 9: ADVANCED SETUP

63

 

9.1 Routing

 

63

 

9.1.1 Add

Route

63

 

9.2 NAT

 

 

65

 

9.2.2

DMZ

65

 

9.2.3 Virtual Server

66

 

9.2.4 IP Address Mapping

67

 

9.3 ADSL

 

68

CHAPTER 10: MAINTENANCE

69

 

10.1

Administration

 

69

 

10.2

Time Zone

 

 

69

 

10.3

Firmware

 

 

 

70

 

10.4

SysRestart

 

72

 

10.5

Diagnostic

 

72

CHAPTER 11: STATUS

74

 

11.1

Device Info

 

 

74

 

11.2

System Log

 

75

 

11.3

Statistics

 

75

APPENDIX A: TROUBLESHOOTING

78

 

A.1 Using LEDs to Diagnose Problems

 

78

 

 

WebShare 142W

 

A.1.1 Power LED

78

A.1.2 LAN LED

78

A.1.3 DSL LED

78

A.2

Telnet

79

A.3

Web Configurator

79

A.4

Login Username and Password

80

A.5

LAN Interface

80

A.6

WAN Interface

81

A.7

Internet Access

81

A.8 Remote Management

82

A.9

Remote Node Connection

82

A.10 FAQ

83

APPENDIX B: TECHNICAL FEATURES

86

APPENDIX C:SUPPORT

87

WebShare 142W

A02-RA142-W54_ME01(V1.0 October 2006)

WebShare 142W

Copyright Statement

No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, whether electronic, mechanical, photocopying, recording or otherwise without the prior writing of the publisher. Windows™ 98SE/2000/ME/XP are trademarks of Microsoft® Corp. Pentium is trademark of Intel. All copyright reserved.

The Atlantis Land logo is a registered trademark of Atlantis Land SpA. All other names mentioned mat be trademarks or registered trademarks of their respective owners. Subject to change without notice. No liability for technical errors and/or omissions.

Wireless LAN, Health and Authorization for use

Radio frequency electromagnetic energy is emitted from Wireless LAN devices. The energy levels of these emissions however are far much less than the electromagnetic energy emissions from wireless devices like for example mobile phones. Wireless LAN devices are safe for use frequency safety standards and recommendations. The use of Wireless LAN devices may be restricted in some situations or environments for example:

·On board of airplanes, or

·In an explosive environment, or

·In case the interference risk to other devices or services is perceived or identified as harmful

In case the policy regarding the use of Wireless LAN devices in specific organizations or environments (e.g. airports, hospitals, chemical/oil/gas industrial plants, private buildings etc.) is not clear, please ask for authorization to use these devices prior to operating the equipment.

Regulatory Information/disclaimers

Installation and use of this Wireless LAN device must be in strict accordance with the instructions included in the user documentation provided with the product. Any changes or modifications made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment. The Manufacturer is not responsible for any radio or television interference caused by unauthorized modification of this device, of the substitution or attachment. Manufacturer and its authorized resellers or distributors will assume no liability for any damage or violation of government regulations arising from failing to comply with these guidelines.

WebShare 142W

CE Mark Warning

This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

CE in which Countries where the product may be used freely:

Germany, UK, Italy, Spain, Belgium, Netherlands, Portugal, Greece, Ireland, Denmark, Luxembourg, Austria, Finland, Sweden, Norway and Iceland.

France: except the channel 10 through 13, law prohibits the use of other channels.

CE/EMC Restriction of Liability

The product described in this handbook was designed, produced and approved according to the EMC-regulationsand is certified to be within EMC limitations.

If the product is used in an uncertified PC, the manufacturer undertakes no warranty in respect to the EMC limits. The described product in this handbook was constructed, produced and certified so that the measured values are within EMC limitations. In practice and under special circumstances, it may be possible, that the product may be outside of the given limits if it is used in a PC that is not produced under EMC certification. It is also possible in certain cases and under special circumstances, which the given EMC peak values will become out of tolerance. In these cases, the user himself is responsible for compliance with the EMC limits.

Declaration of Conformity

This equipment has been tested and found to comply with Directive 1999/5/CE of the European Parliament and of the Council on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity. After assessment, the equipment has been found to comply with the following standards: EN 300.328 (radio), EN 301 489-1,EN 301489-17(electromagnetic compatibility) and EN 60950 (safety). This equipment may be used in all European Union contries and in all countries applying Directive 1999/5/CE, without restriction, with the exception of the following countries:

France:When this equipment is used outdoors, output power is limited to within the frequency bans listed on the chart. For more info, consult the websitewww.art-telecom.fr.

Location

Frequency

Band

Power (EIRP)

 

(MHz)

 

 

Indoor (no restriction)

2400-2483,5

 

100mW(20dBm)

Outdoor

2400-2454

 

100mW(20dBm)

 

2454-2483,5

 

10mW(10dBm)

Italy: For more info, consult the websitewww.comunicazioni.it

WebShare 142W